1. 제품 오버view
The BlueRigger Digital Toslink Optical 3x1 Switch allows you to connect up to three digital optical audio sources to a single optical input on your audio receiver, soundbar, or amplifier. This device provides a convenient solution for managing multiple audio sources without frequently swapping cables. It supports various audio formats, ensuring high-quality sound transmission.
그림 1: 전면 및 후면 view of the BlueRigger Digital Toslink Optical 3x1 Switch, showing input/output ports, power connection, and LED indicators.
2. 주요 특징
- 3-in-1 Toslink Switching: Connects three Toslink audio devices to one output device.
- 오디오 형식 지원 : Supports LPCM 2.0, 192kHz/24Bit sampling frequency, DTS/Dolby-AC3, Dolby Digital, and DTS 5.1.
- 제어 옵션: Features both an IR remote control and a manual switch button for source selection.
- 내구성 있는 구조: 금속 케이스에 담겨 있음asing for enhanced heat dissipation and longevity.
- 안정적인 전송: Incorporates an advanced IC chipset for lossless and stable audio signal transmission.
- 폭넓은 호환성: Compatible with any digital audio device featuring a Toslink/Optical port, including soundbars, speakers, gaming consoles (Xbox, PS4/PS3/PS2), Blu-ray players, HDTVs, amplifiers, and TV boxes.
3. 설정 지침
3.1 패키지 내용
설치하기 전에 모든 구성품이 있는지 확인하십시오.
- BlueRigger Digital Toslink Optical 3x1 Switch
- IR 원격 제어
- USB Power Cable (Note: Power adapter is not included)
3.2 결선도
그림 2: Illustrative diagram for connecting input sources and an output device to the Toslink switch, including power connection.
3.3 단계별 설치
- 입력 장치 연결: Use Toslink optical cables to connect your audio source devices (e.g., gaming console, HDTV, Blu-ray player) to the IN1, IN2, and IN3 ports on the BlueRigger Toslink Switch.
- 출력 장치를 연결하십시오: Connect one end of a Toslink optical cable to the OUT port on the BlueRigger Toslink Switch and the other end to the optical input of your audio receiver, soundbar, or amp리퍼.
- 전원 연결: Connect the provided USB power cable to the POWER port on the switch. Plug the other end into a USB power source (e.g., a USB port on your TV, a USB wall adapter, or a computer USB port). A power adapter is not included. Ensure the power LED illuminates.
- Cable Length Note: Ensure all Toslink cables used are shorter than 50 feet (approximately 15 meters) for optimal performance.
그림 3: Visual representation of compatible Toslink ports and a Toslink cable, emphasizing the cable length recommendation.
4. 사용 설명서
The BlueRigger Digital Toslink Optical 3x1 Switch offers two methods for selecting your desired audio source:
4.1 수동 전환
Press the 'SWITCH' button on the front panel of the device to cycle through the input sources (IN1, IN2, IN3). The corresponding LED indicator will light up to show the currently active input.
4.2 원격 제어 전환
Use the included IR remote control to directly select the desired input source. Point the remote towards the IR receiver on the front of the switch and press the button corresponding to the input you wish to activate (IN1, IN2, or IN3).
그림 4: Illustration of the two switching methods: manual button on the device and IR remote control.
중요 참고 사항: 이 스위치는 아니다 support auto-switching. You must manually select the input source using either the button on the device or the IR remote control.
5. 유지관리
To ensure the longevity and optimal performance of your BlueRigger Digital Toslink Optical 3x1 Switch, follow these maintenance guidelines:
- 청소: 기기 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 스프레이형 세척제는 기기를 손상시킬 수 있으므로 사용하지 마십시오.
- 환경: Keep the switch in a cool, dry place away from direct sunlight, high temperatures, and excessive humidity.
- 손질: 장치를 떨어뜨리거나 강한 충격을 가하지 마십시오.
- 케이블 관리: Handle Toslink optical cables carefully. Do not bend them sharply or apply excessive force, as this can damage the fiber optic core.
6. 문제 해결
If you encounter issues with your BlueRigger Digital Toslink Optical 3x1 Switch, please refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 오디오 출력이 없습니다 |
|
|
| 리모컨이 작동하지 않습니다 |
|
|
| Poor audio quality or intermittent sound |
|
|
7. 제품 사양
| 사양 | 세부 사항 |
|---|---|
| 모델 번호 | 301TS-TOSLINK-SWITCH |
| 제품 치수 | 3.3 x 4.7 x 7.8cm |
| 품목 무게 | 250g |
| 인터페이스 유형 | 광학(Toslink) |
| 입력 수 | 3 |
| 출력 수 | 1 |
| 오디오 출력 모드 | 스테레오, 서라운드 사운드 |
| 지원되는 오디오 형식 | LPCM 2.0, DTS/Dolby-AC3, Dolby Digital, DTS 5.1 |
| Samp링 주파수 | Up to 192kHz/24Bit |
| 제어 | 수동 버튼, 적외선 리모컨 |
| 전원 공급 장치 | USB Powered (cable included, adapter not included) |
| 하우징 소재 | 금속 |
| 한국어: | 810146952206 |
8. 보증 및 지원
BlueRigger stands behind the quality of its products.
- 보증: This product is covered by a Lifetime Warranty.
- 고객 지원: For any questions, technical assistance, or warranty claims, please contact BlueRigger's US-based customer support. Refer to the contact information provided with your product or visit the official BlueRigger web자세한 내용은 사이트.