Ashly ECOTOUR500.2-120V-U

Ashly EcoTour™ 500.2 Professional Touring Power Ampliifier 사용 설명서

Model: ECOTOUR500.2-120V-U

1. 서론

The Ashly EcoTour™ 500.2 is a high-efficiency touring power amplifier designed for professional audio applications. It delivers 2 x 500W at 2/4 Ohms, 250W at 8 Ohms, and 1000W bridged at 70V. This amplifier is engineered for optimal performance, minimizing electricity usage, and reducing energy costs. This manual provides essential information for the safe and efficient operation of your EcoTour™ 500.2 amp리퍼.

2. 안전 정보

이 기기를 작동하기 전에 모든 안전 지침을 읽고 이해하십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.

  • WARNING: RISK OF HAZARDOUS ENERGY. Refer to the operating manual for detailed safety procedures.
  • 주의: 화재나 감전의 위험을 줄이려면 이 장비를 비나 습기에 노출시키지 마십시오.
  • 이 장치는 FCC 규정 제15부를 준수합니다. 작동은 다음 두 가지 조건에 따릅니다. (1) 이 장치는 유해한 간섭을 일으키지 않아야 합니다. (2) 이 장치는 원치 않는 작동을 일으킬 수 있는 간섭을 포함하여 수신된 모든 간섭을 수용해야 합니다.
  • 과열을 방지하기 위해 적절한 환기를 유지하세요. 환기구를 막지 마세요.
  • Always disconnect the power cord before performing any maintenance or making connections.

3. 제품 오버view

The Ashly EcoTour™ 500.2 is a robust and efficient power amplifier designed for professional touring and fixed installations. It features a durable 19-inch rack-mountable chassis.

3.1 전면 패널 기능

Front panel of the Ashly EcoTour 500.2 amp리퍼

그림 1: Front panel of the Ashly EcoTour™ 500.2 amplifier, showing the power switch on the left and individual channel gain controls with LED indicators on the right.

  • 전원 스위치: Located on the left side of the front panel, used to turn the amp리파이어 ON/OFF.
  • Channel Gain Controls: Individual rotary knobs for adjusting the volume/gain of each channel (CH-A, CH-B, CH-C, CH-D).
  • LED 표시등: Each channel features LIMIT and SIG LEDs to indicate signal presence and clipping.

3.2 후면 패널 기능

Rear panel of the Ashly EcoTour 500.2 amp리퍼

그림 2: Rear panel of the Ashly EcoTour™ 500.2 amplifier, detailing input/output connections, DIP switches, and power input.

  • Input Connectors (CH1/CH2): Dual XLR and 1/4-inch (TRS/TS) input jacks for each channel.
  • Speaker Outputs (CH1/2, CH2): SpeakON connectors for speaker connections. Supports CH1 1+/-, CH2 2+/-, and Bridge 1+/2+.
  • Bridge/Normal Switch: Selects between normal stereo operation and bridged mono operation for increased power output.
  • 딥 스위치 설정: Configurable switches for Front Panel Disable, High-Pass Filter (HPF), Limiter, and Gain settings (26dB, 32dB, 38dB, 1.4V).
  • AC 입력: Standard IEC power inlet for the detachable AC power cord.
  • 권tage 선택기: A switch to select between 115V and 230V operation for international use.
  • 냉각 팬 : Two cooling fans provide front-to-rear airflow for thermal management.

4. 설정

Follow these steps to properly set up your Ashly EcoTour™ 500.2 amp리퍼.

  1. 짐 풀기: 조심스럽게 amp앰프를 포장에서 꺼내어 손상 여부를 확인하십시오.
  2. 랙 장착: 그만큼 amplifier is designed for 19-inch rack mounting. Secure it using appropriate rack screws. Ensure adequate space for airflow around the unit.
  3. 권tage 선택: Before connecting to power, verify the voltag후면 패널의 선택 스위치가 올바른 볼륨으로 설정되어 있습니다.tag해당 지역의 전압(115V 또는 230V)을 확인하세요. 잘못된 볼륨tag선택하면 장치가 손상될 수 있습니다.
  4. 입력 연결: 오디오 소스(믹서, 프리앰프 등)를 연결하세요.amplifier, etc.) to the CH1 and CH2 INPUTs on the rear panel using XLR or 1/4-inch cables.
    Input connector wiring diagram on the rear panel

    그림 3: Detail of input connector wiring (XLR and 1/4-inch) on the rear panel.

  5. 출력 연결 : Connect your speakers to the SPEAKER OUTPUTS using SpeakON cables. Ensure correct polarity.
    SpeakON connector wiring diagram on the rear panel

    그림 4: Detail of SpeakON connector wiring on the rear panel.

  6. DIP 스위치 구성: Adjust the DIP switches on the rear panel according to your system requirements.
    표 1: DIP 스위치 설정
    환경ON 위치OFF 위치
    전면 패널 비활성화활성화됨장애가 있는
    HPF(하이패스 필터)활성화됨장애가 있는
    리미터활성화됨장애가 있는
    얻다26dB, 32dB, 38dB, 1.4V (per channel, specific switch combinations)Default/Other Gain Setting

    Refer to the detailed diagram on the rear panel for specific gain switch combinations.

  7. 전원 연결: Connect the supplied AC power cord to the AC Input on the rear panel and then to a suitable power outlet.

5. 사용 설명서

일단 amplifier is properly set up, follow these steps for operation.

  1. 전원 켜기: Ensure all gain controls are set to minimum. Press the Power Switch on the front panel to turn on the amp앰프. 전원 표시등 LED가 켜집니다.
  2. 게인 조정: Slowly increase the individual Channel Gain Controls (CH-A, CH-B, CH-C, CH-D) to achieve the desired output level.
  3. 모니터 LED:
    • SIG LED: Illuminates when an audio signal is present on the channel.
    • 제한 LED: 다음과 같은 경우에 켜집니다. amplifier is approaching or reaching its maximum output. Reduce the gain if this LED is constantly lit to prevent clipping and distortion.
  4. Bridge Mode (Optional): If higher power output is required for a single speaker, set the Bridge/Normal switch to BRIDGE. Ensure your speaker is rated for bridged operation and connected to the designated bridged output.
  5. 전원 끄기 : Before powering off, reduce all gain controls to minimum. Then, press the Power Switch to turn off the amp리퍼.

6. 유지관리

정기적인 유지관리는 제품의 수명과 최적의 성능을 보장합니다. amp리퍼.

  • 청소: 부드럽고 마른 천을 사용하여 외부를 청소하십시오. amp액체 세척제나 용제는 사용하지 마세요.
  • 통풍: Ensure the cooling fans and ventilation grilles are free from dust and obstructions. Periodically clean the grilles with a soft brush or vacuum cleaner.
  • 케이블 연결: Periodically check all input and output cable connections for secure fit and signs of wear.
  • 저장: 저장하는 경우 amplifier for an extended period, ensure it is in a dry, dust-free environment and protected from extreme temperatures.

7. 문제 해결

이 섹션에서는 사용 중에 발생할 수 있는 일반적인 문제에 대해 다룹니다. amp리퍼.

표 2: 문제 해결 가이드
문제가능한 원인해결책
전원이 없습니다Power cord disconnected, outlet fault, voltage 선택기가 잘못되었습니다.Check power cord connection, try a different outlet, verify voltage 선택기 설정.
사운드 출력이 없습니다Input/output cables disconnected, gain set to minimum, source device off, speaker fault.Check all cable connections, increase gain, ensure audio source is active, test speakers.
Distorted sound / LIMIT LED constantly on입력 신호가 너무 높습니다. amplifier overloaded, speaker impedance mismatch.Reduce input signal level, lower channel gain, ensure speaker impedance matches amp앰프의 등급.
과열환기가 막혀 있고, 부하가 너무 큽니다.Ensure clear airflow around the unit, reduce load, check fan operation.

8. 사양

  • 모델: ECOTOUR500.2-120V-U
  • 전력 출력: 2 x 500W @ 2/4 Ohms, 250W @ 8 Ohms, 1000W bridged @ 70V
  • 채널: 2
  • 입력 커넥터: XLR, 1/4-inch (TRS/TS)
  • 출력 커넥터: 스피크온
  • 권tage: 100-240VAC, 50/60Hz (selectable)
  • 치수: 16 x 19 x 3.5인치(40.64 x 48.26 x 8.89cm)
  • 품목 무게: 18.5파운드(8.39kg)
  • 특징: Ultra High-Efficiency Amplification, Eco-friendly design, Stable down to 0.2 Ohms.

9. 보증 및 지원

For warranty information or technical support, please contact Ashly customer service or visit the official Ashly web대지.

Ashly Store: Visit the Ashly Store on Amazon

10. Related Videos (Not Applicable)

No official product videos directly relevant to the Ashly EcoTour™ 500.2 amplifier were found in the provided data. Videos found were for a different product (MUSYSIC MU-D9600) and therefore not included.

© 2024 Ashly. All rights reserved.

미국에서 설계되었습니다.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.