1. 서론
This manual provides essential information for the safe and efficient use of your DATOUBOSS 24V 100Ah LiFePO4 Deep Cycle Battery. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your battery.
2. 안전 정보
부상이나 배터리 및 연결된 장비의 손상을 방지하기 위해 다음 안전 수칙을 준수하십시오.
- 양극과 음극 단자를 단락시키지 마십시오.
- 허가 없이 배터리를 개조하거나 분해하지 마십시오.
- 배터리를 불이나 물에 노출시키지 마십시오.
- Use only a standard charger that matches the voltage output of the lithium battery.
- 충전 및 방전 중에는 적절한 환기가 이루어지도록 하십시오.
- 어린이의 손이 닿지 않는 곳에 보관하세요.
Image: DATOUBOSS 24V 100Ah LiFePO4 Battery showing product labels with specifications and critical safety warnings.
3. 제품 특징
The DATOUBOSS 24V 100Ah LiFePO4 battery offers advanced features for reliable power storage:
- Integrated 100A Battery Management System (BMS): Protects against overcharge, over-discharge, overcurrent, short-circuit, and extreme temperatures (high/low temperature cut-off).
- 가벼운 디자인: Weighs approximately 18.1 kg, significantly lighter than traditional lead-acid batteries of comparable capacity.
- 연장된 수명: Provides over 8000 charge/discharge cycles, offering a lifespan of more than 10 years.
- 고성능: Achieves 100% Depth of Discharge (DoD) for maximum usable energy.
- 첨단 LiFePO4 기술: Utilizes Grade A cells for higher energy density, stable performance, fast charging, and no memory effect.
- 환경 안전: Constructed without heavy metals or toxic substances, complying with European RoHS regulations.
Image: Diagram detailing the intelligent BMS features, including protection against overcharge, overcurrent, high temperature, over-discharge, and short circuit.
4. 설정 및 설치
올바른 설정 및 설치를 위해 다음 단계를 따르십시오.
- 포장 풀기 및 검사: Carefully unpack the battery and inspect it for any visible damage. Contact customer support immediately if damage is found.
- 장착 위치: Install the battery in a clean, dry, and well-ventilated area. Ensure the ambient temperature is within the recommended operating range.
- 직렬 및 병렬 연결: The DATOUBOSS 24V 100Ah battery supports both series and parallel connections for increased voltage or capacity. When connecting multiple batteries, ensure all batteries are of the same model and capacity, and are at a similar state of charge before connecting. Use appropriate cables and connectors rated for the expected current.
- 터미널 연결: Connect the positive (+) terminal of the battery to the positive (+) terminal of your system, and the negative (-) terminal to the negative (-) terminal. Ensure connections are secure and tight to prevent arcing and overheating.
- 초기 청구 : 처음 사용하기 전에 배터리를 완전히 충전하는 것이 좋습니다. 호환되는 LiFePO4 충전기를 사용하십시오.
5. 사용 설명서
To operate your DATOUBOSS LiFePO4 battery effectively:
- 충전 중:
- Use a dedicated LiFePO4 charger with a voltage output compatible with 24V batteries.
- Recommended charge current: Max 50A.
- Charge temperature range: 0°C to 45°C (32°F to 113°F).
- 방전:
- Maximum continuous discharge current: 100A.
- Maximum peak discharge current: 120A.
- Discharge temperature range: -20°C to 65°C (-4°F to 149°F).
- The BMS will automatically cut off power if discharge limits are exceeded or if the battery voltage가 너무 낮게 떨어집니다.
- 응용 프로그램: This battery is suitable for various applications including RVs, marine vessels, solar energy storage systems (on-grid and off-grid), caravans, and as a general backup power source.
Image: DATOUBOSS LiFePO4 batteries integrated into a power supply system for mobile devices, shown in an RV setting, highlighting their suitability for travel applications.
6. 유지관리
DATOUBOSS LiFePO4 batteries are largely maintenance-free. However, consider the following for optimal performance:
- 정기 검사: 배터리 단자에 부식이나 연결 불량이 있는지 주기적으로 점검하고 필요에 따라 청소하십시오.
- 저장: 배터리를 장기간 보관할 경우, 용량의 약 50~70%까지 충전해 두십시오. 직사광선과 극한 온도 변화를 피해 서늘하고 건조한 곳에 보관하십시오.
- 깊은 곳에서 사정하지 않도록 하십시오: While the battery supports 100% DoD, frequent deep discharges can slightly reduce overall cycle life.
7. 문제 해결
배터리에 문제가 발생하면 다음의 일반적인 문제 및 해결 방법을 참조하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 배터리가 충전되지 않음 | Charger malfunction, loose connections, BMS protection activated (over-discharge, low temperature) | Check charger functionality and connections. Ensure ambient temperature is within charging range. If BMS is active, allow battery to warm up or reset by disconnecting and reconnecting. |
| 배터리가 방전되지 않음 | BMS protection activated (over-discharge, overcurrent, high temperature) | Reduce load. Allow battery to cool down. If over-discharged, connect to a charger to reactivate. |
| 용량 또는 실행 시간 감소 | Partial charge, aging, extreme operating conditions | Ensure full charge cycles. Verify operating temperatures are within recommended ranges. |
If the problem persists, contact DATOUBOSS customer support for assistance.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델명 | 24V100AH |
| 공칭 권tage | 25.6V |
| 정격 용량 | 100아아 |
| 에너지 | 2560Wh |
| 내장형 BMS | 100A |
| 최대 충전 전류 | 50A |
| 최대 연속 방전 전류 | 100A |
| 최대 피크 방전 전류 | 120A |
| 사이클 수명 | 8000+ 사이클 |
| 수명 | 10세 이상 |
| 무게 | 18.1kg |
| 충전 온도 | 0°C ~ 45°C |
| 배출 온도 | -20°C ~ 65°C |
9. 보증 및 지원
DATOUBOSS stands behind the quality of its products:
- 보증: This battery comes with a 5-year warranty from the date of purchase.
- 고객 지원: Professional 24-hour customer service is available to assist with any product-related issues or inquiries. Please do not hesitate to contact us.
Image: Visual representation of key product benefits including 10 years lifespan, 5 years guarantee, 24 hours response, and local warehouses.