DK-CA001

캔암 매버릭 전동 어린이 유모차 사용 설명서

Model: DK-CA001

소개

This manual provides essential information for the safe operation, assembly, maintenance, and troubleshooting of your new Electric Children's Buggy Can-am Maverick. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

옆 view of the Electric Children's Buggy Can-am Maverick in blue and black.

Image: A dynamic side view of the Electric Children's Buggy Can-am Maverick, showcasing its robust design and vibrant blue and black color scheme.

중요한 안전 정보

To reduce the risk of injury, adult supervision is required at all times. Never use this vehicle on roadways, near cars, near steep inclines or steps. Do not submerge the vehicle in water or other liquids.

설정 및 조립

Assembly is required for this product. Please follow the steps below carefully.

포장 풀기 및 초기 검사

포장에서 모든 구성품을 조심스럽게 꺼내십시오. 포장 목록에 기재된 모든 부품이 있는지, 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 손상된 경우 조립을 진행하지 말고 고객 지원 센터에 문의하십시오.

조립 단계

  1. 바퀴 설치: Attach the wheels to the axles, ensuring they are securely fastened with the provided hardware.
  2. 스티어링 휠 조립: Connect the steering wheel to the steering column. Ensure it clicks into place or is secured with the designated screw.
  3. 좌석 설치: Place the seats into the designated slots and secure them. Ensure seatbelts are accessible and functional.
  4. 배터리 연결: Connect the battery terminals. Refer to the battery compartment for specific instructions. Ensure the connection is firm.
  5. 첫 번째 요금: Before first use, fully charge the battery for 8-12 hours. Do not overcharge.
뒤쪽 view of the electric buggy with the door open, showing the interior and rear suspension.

이미지: 후면 view of the electric buggy with the door open, highlighting the spacious interior and robust rear suspension components.

작동 지침

컨트롤 오버view

Dashboard of the electric buggy showing the steering wheel, speedometer, and media screen.

Image: The dashboard of the electric buggy, featuring the steering wheel, a digital speedometer display, and a multimedia screen.

Close-up of the electric buggy's start button and key slot.

이미지: 클로즈업 view of the electric buggy's central console, showing the start/stop button and the key ignition slot.

차량 운전

  1. Ensure the child is seated properly and the seatbelt is fastened.
  2. Press the Start/Stop button to power on the vehicle.
  3. Gently press the accelerator pedal to move forward. Release the pedal to stop.
  4. 핸들을 이용하여 방향을 조절하세요.
  5. Always supervise the child during operation.
내부 view of the electric buggy showing two black seats with seatbelts.

Image: The interior of the electric buggy, featuring two black, contoured seats equipped with safety seatbelts.

Close-up of the electric buggy's multimedia screen displaying music playback.

Image: A close-up of the electric buggy's multimedia screen, showing a music playback interface with song titles and an equalizer display.

유지

배터리 관리

청소 및 보관

문제 해결

문제가능한 원인해결책
차량이 움직이지 않습니다Battery is low or disconnected; Loose wire connection; Blown fuse.Charge battery; Check battery connections; Check fuse and replace if necessary.
차량이 천천히 달린다Battery is low; Overloaded vehicle; Operating on rough terrain.Recharge battery; Reduce load; Operate on smoother surfaces.
No sound from multimedia screenVolume is too low; Audio cable disconnected.Increase volume; Check audio connections.

명세서

보증 및 지원

This product comes with a return policy of 7 days from the date of purchase. For any issues, questions, or to claim warranty support, please contact the seller directly. Please retain your proof of purchase for any warranty claims.

파는 사람: ELETRONIC PRO LTDA

관련 문서 - DK-CA001

사전view Can-Am Maverick DK-CA001 전기 승용 장난감 설치 및 작동 설명서
Can-Am Maverick DK-CA001 전동 승용 장난감의 종합적인 설치 및 작동 설명서입니다. 안전하고 즐거운 사용을 위한 조립 단계, 안전 지침, 문제 해결, 배터리 충전, 리모컨 페어링 방법이 포함되어 있습니다.
사전view Freddo Can-Am Maverick UTV 전기 승용 장난감 사용 설명서
Freddo Can-Am Maverick UTV 승용 장난감(모델명 DK-CA001)에 대한 종합 사용 설명서입니다. 이 설명서에는 제품 사양, 조립 단계, 리모컨 페어링, 안전 경고, 그리고 어린이용 전기 차량의 최적의 사용 및 유지 관리를 위한 문제 해결 팁이 포함되어 있습니다.
사전view DK-CA001 Electric Ride-On Car Operating and Assembly Manual
Comprehensive operating and assembly manual for the DK-CA001 electric ride-on car, including specifications, safety instructions, troubleshooting, and detailed step-by-step assembly guides.
사전view DK-CA001 Prevádzkový 및 montážny 매뉴얼
이전에 전자 기술을 사용하기 전에 DK-CA001을 사용하는 몽타주 매뉴얼, vrátane špecifikácií, bezpečnostných pokynov, montážnych krokov 및 riešenia problémov.
사전view Brother Professional 라벨 가이드: 다이컷 및 연속 롤
Brother의 다이컷 및 연속 라벨 롤에 대한 포괄적인 가이드로, QL, TD, VC 범위에 대한 설명, 접착제 유형, 라벨 크기, 롤당 라벨, 소재 유형 및 품목 코드를 자세히 설명합니다.
사전view Pintech DK 시리즈 플렉시블 전류 프로브 사용 설명서
Pintech DK 시리즈 유연 전류 프로브에 대한 사용 설명서로, 기능, 작동, 안전 예방 조치, 사양 및 유지 관리에 대한 자세한 내용을 설명합니다.