HAPPYGRILL Tall Adirondack Chairs Set

소개

Thank you for choosing the HAPPYGRILL Tall Adirondack Chairs Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new HDPE patio bar stools. Please read these instructions carefully before assembly and retain them for future reference.

The HAPPYGRILL Tall Adirondack Chairs Set provides comfortable outdoor seating.

안전 정보

• 의자를 조립할 때는 손상을 방지하기 위해 항상 부드럽고 깨끗한 표면 위에서 조립하십시오.
• 사용 전에 모든 볼트와 나사가 단단히 조여졌는지 확인하십시오. 정기적으로 점검하고 필요하면 다시 조이십시오.
• 의자당 최대 중량 용량은 330파운드(150kg)를 초과하지 마십시오.
• 어린이가 조립 구역에 접근하지 못하도록 하세요. 작은 부품은 질식 위험을 초래할 수 있습니다.
• Use the chair only on a flat, stable surface to prevent tipping.
• 의자 위에 서거나 의자를 발판으로 사용하지 마십시오.

패키지 내용

Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact HAPPYGRILL customer support.

• Chair Components (Backrest, Seat, Armrests, Legs, Footrest)
• 하드웨어 세트 (나사, 볼트, 와셔, 육각렌치)
• 사용 설명서

설정 및 조립

Follow these steps carefully to assemble your HAPPYGRILL Tall Adirondack Chair. It is recommended to have two people for assembly.

1. 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼낸 후, 긁힘을 방지하기 위해 부드럽고 깨끗한 표면에 놓으세요.
2. 등받이를 좌석에 부착하세요: Connect the backrest to the seat using the provided hardware. Do not fully tighten screws at this stage.
3. 다리 조립: Attach the front and rear legs to the seat and backrest assembly. Ensure correct orientation.
4. 팔걸이 설치: Secure the armrests to the side of the seat and backrest.
5. 발받침대 부착: Connect the footrest between the front legs.
6. 최종 조임: Once all parts are loosely assembled and aligned, gradually tighten all screws and bolts using the included Allen wrench. Important: Do not tighten screws until all holes are aligned. Otherwise, some screw holes may be misaligned, or result in different lengths of furniture legs.

Refer to the product dimensions for proper assembly and placement.

Ensure all screw connections are reinforced and secure.

작동 지침

The HAPPYGRILL Tall Adirondack Chair is designed for outdoor leisure. Its ergonomic features provide comfort for extended periods.

• 놓기: Position the chair on a stable, level surface in your backyard, lawn, poolside, or patio area.
• Recommended Table Height: This bar height chair is ideal for pairing with counter tables that are 35 to 39 inches high.
• 편의 기능: The 105° inclined backrest, curved seat, wide armrests, and 4.5-inch wide footrest are designed to relieve stress and fatigue.

Ergonomic design ensures comfort and breathability.

The 24.5-inch seat height is suitable for 35-39 inch counter height tables.

유지

The HDPE construction of your Adirondack chair makes maintenance simple and easy.

• 청소: Wipe the chair with a wet cloth to remove dirt and debris. For tougher stains, a mild soap solution can be used. Rinse thoroughly with water.
• 가혹한 화학 물질 없음: Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the HDPE material.
• 내후성: The HDPE material is waterproof, sunproof, and anti-fading, designed for extended outdoor use without significant wear.

HDPE material ensures durability and easy maintenance in various weather conditions.

문제 해결

의자에 문제가 발생하면 다음의 일반적인 해결책을 참조하세요.

• 흔들리는 의자: Ensure all screws and bolts are fully tightened. Check that the chair is placed on a level surface. If the issue persists, disassemble and reassemble, ensuring all parts are correctly aligned before tightening.
• 구멍 정렬의 어려움: Do not fully tighten any screws until all components are loosely connected. This allows for minor adjustments to align holes.
• 손상되었거나 누락된 부품: If you received damaged or missing parts, please contact HAPPYGRILL customer support for assistance.

명세서

보증 및 지원

Specific warranty details for this product are not provided in the available information. For warranty claims, technical support, or to inquire about replacement parts, please contact HAPPYGRILL directly through their official web제품을 구매한 사이트 또는 소매업체.

Please have your model number (HG3021) and purchase information ready when contacting support.