소개
This manual provides detailed instructions for the assembly, operation, and maintenance of your BEISHI Mobile TV Stand with Power Outlet, Model TC241011. This versatile TV stand is designed for televisions ranging from 32 to 75 inches, supporting up to 110 lbs. It features a convenient handle lift for height adjustment, 90-degree swivel for portrait or landscape viewing, and integrated power outlets for your devices. Please read this manual thoroughly before use to ensure proper setup and safe operation.
설치 지침
Before beginning assembly, ensure all parts are present and undamaged. Refer to the included hardware pack for specific components. A second person may be helpful for certain assembly steps, especially when mounting the television.
- 구성 요소 풀기: 모든 부품을 포장에서 조심스럽게 꺼낸 후 긁힘을 방지하기 위해 깨끗하고 부드러운 표면에 놓으세요.
- 베이스 조립: Attach the vertical support column to the base plate using the provided screws and tools. Ensure all connections are secure.
- 캐스터 설치: Screw the four 360° lockable casters into the designated holes on the bottom of the base. Tighten them firmly.
- TV 브라켓 부착: Secure the VESA mounting brackets to the back of your television. This stand supports VESA patterns from 100x100mm to 600x400mm. Select the appropriate screws and spacers for your TV model.
- TV를 스탠드에 장착하기: With assistance, carefully lift your television and hook the mounted brackets onto the main support frame of the stand. Secure the TV using the safety screws or locking mechanisms provided.
- 전원 스트립 연결: Ensure the integrated power strip is correctly positioned and its power cord is accessible for connection to a wall outlet.
작동 지침
높이 조정
The TV stand features a handle lift mechanism for stepless height adjustment. To adjust the height:
- Locate the handle on the side of the vertical support column.
- Turn the handle to raise or lower the television to your desired viewing height. The adjustable height range is 45.6 inches to 62.7 inches.
- Release the handle to lock the TV at the chosen height.
90° Swivel Adjustment (Portrait to Landscape)
The TV mounting plate allows for a 90-degree rotation, enabling you to switch between horizontal (landscape) and vertical (portrait) screen orientations.
- Ensure the area around the TV is clear to prevent collisions during rotation.
- Carefully rotate the television 90 degrees to achieve the desired orientation.
- Confirm the TV is securely in place after rotation.
내장 전원 콘센트 사용하기
The TV cart includes a built-in power strip to conveniently power your devices.
- The power strip features 3 AC outlets (120V/12A) and 2 USB ports (5V/2A).
- Plug the 5 ft power cord from the stand into a standard wall outlet.
- Use the one-click switch on the power strip to turn power on or off to connected devices.
이동성과 안정성
The stand is equipped with four 360° rotating casters for easy movement. Each caster can be locked to secure the stand in place.
- To move the stand, unlock all four casters.
- To stabilize the stand, push down the locking lever on each caster until it clicks into place.
케이블 관리
Utilize the integrated cable management features on the back of the stand to keep cables organized and prevent clutter.
제품 특징 영상
Watch this video for a visual demonstration of the BEISHI Mobile TV Stand's key features, including the power outlet, height adjustment, and mobility.
유지
정기적인 유지 관리는 TV 스탠드의 수명 연장과 안전한 사용을 보장합니다.
- 청소: 스탠드를 부드러운 천으로 닦으세요.amp 천으로 닦으세요. 마감재를 손상시킬 수 있는 연마성 세제나 용제는 사용하지 마세요.
- 연결 확인: 모든 나사와 볼트가 단단히 조여져 있는지 주기적으로 점검하십시오. 필요한 경우 다시 조이십시오.
- 캐스터 검사: Keep the casters free of debris and hair to ensure smooth rolling. Lubricate if movement becomes stiff.
- 전원 스트립: Ensure the power strip is free from dust and moisture. Do not overload the outlets.
문제 해결
If you encounter issues with your BEISHI Mobile TV Stand, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| TV 스탠드가 흔들리거나 불안정합니다. | Loose connections; uneven floor; casters unlocked. | Check and tighten all assembly screws. Ensure the stand is on a flat surface. Lock all casters. |
| 높이 조절이 어려움. | Mechanism obstructed; excessive weight. | Ensure no cables or objects are interfering with the handle lift. Verify TV weight is within the 110 lbs limit. |
| TV does not rotate smoothly. | 막힘 현상 발생; 작동 메커니즘에 윤활유가 필요합니다. | Check for any obstructions. Apply a small amount of silicone lubricant to the rotating parts if necessary. |
| 전원 콘센트가 작동하지 않습니다. | Power cord unplugged; power strip switch off; circuit breaker tripped. | Ensure the stand's power cord is securely plugged into a live wall outlet. Turn on the power strip switch. Check your household circuit breaker. |
| 바퀴가 굴러가기 어렵습니다. | Casters locked; debris in wheels. | Unlock all casters. Remove any hair or debris from the wheels. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | 베이시 |
| 모델 번호 | TC241011 |
| 장착 유형 | 플로어 마운트 |
| 이동 유형 | Swivel, Height Adjustable, Rolling |
| 재료 | 금속 |
| 색상 | 하얀색 |
| 호환 장치 | 텔레비전 |
| Minimum Supported Screen Size | 32 인치 |
| Maximum Supported Screen Size | 75 인치 |
| 최대 하중 용량 | 110파운드 |
| VESA 패턴 | 100x100mm - 600x400mm |
| 높이 조절 범위 | 45.6인치 - 62.7인치 |
| 회전 각도 | 90° (세로에서 가로로) |
| 전원 콘센트 | AC 콘센트 3개(120V/12A), USB 포트 2개(5V/2A) |
| 전원 코드 길이 | 5 피트 |
| 캐스터 | 4 x 360° Lockable Casters |
보증 정보
This BEISHI Mobile TV Stand (Model TC241011) comes with a one-month warranty from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for any warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
고객 지원
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact BEISHI customer support through the retailer where the product was purchased or visit the official BEISHI web연락처 정보 사이트.
Please have your model number (TC241011) and proof of purchase ready when contacting support.