EverBrite 충전식 엔진룸 작업등 E111014AE 사용 설명서

소개

Thank you for choosing the EverBrite Rechargeable Underhood Work Light. This manual provides essential information for the safe and efficient use of your new work light. Please read it thoroughly before operation and retain it for future reference.

Image: The EverBrite Rechargeable Underhood Work Light, showing its flexible light strip and magnetic ends with adjustable straps.

제품 특징

• 3가지 조명 모드: High, Medium, and Low settings to adapt to various lighting requirements.
• USB-C 고속 충전: Equipped with two USB-C charging ports and LED indicators (red for charging, green for full charge).
• 자석 받침대 디자인: Integrated magnets allow secure attachment to metal surfaces for hands-free operation.
• Adjustable Elastic Strap: Durable nylon strap designed to fit vehicle hoods from 52 to 75 inches wide, providing a secure and flexible fit.
• Dual Hooks: Sturdy hooks on both ends offer additional stability and mounting options.

상자 안에 무엇이 들어있나요?

• EverBrite Rechargeable Underhood Work Light (Model E111014AE)
• USB-C 충전 케이블
• 사용 설명서

Image: Diagram showing the light strip, switch button, magnetic base, charging port, charging indicator, adjustable strap, and hook components.

설정 및 설치

1. 빛을 준비하세요: Unfold the work light. Ensure the elastic straps are properly attached to the magnetic ends.
2. Position on Hood: Open the vehicle's hood. Place the magnetic ends of the light onto the metal frame of the hood. The magnets will securely hold the light in place.
3. 끈으로 고정: Extend the adjustable elastic straps over the hood. Hook the ends of the straps onto suitable points on the hood or vehicle frame to provide additional stability and prevent accidental dislodgement. Adjust the strap length to ensure a snug fit across the hood (compatible with hoods 52 to 75 inches wide).
4. 조명 방향 조정: The flexible light strip can be bent and angled to direct illumination precisely where needed within the engine bay.

Image: The EverBrite work light installed under a car hood, illuminating the engine bay. The adjustable straps are visible.

이미지: 클로즈업 view of the hanging hooks on the EverBrite work light, designed for securing the fixture.

Image: The magnetic base of the EverBrite work light attached to a metal pegboard, demonstrating its hands-free capability.

작동 지침

1. 전원 켜기/끄기: Short press the switch button located on either end of the light to turn it ON.
2. 모드 순환: Once ON, short press the switch button repeatedly to cycle through the three lighting modes: High, Medium, Low, and then OFF.
3. Mode Sequence: High Brightness → Medium Brightness → Low Brightness → OFF.

Image: The EverBrite work light displaying its three distinct lighting modes: Low (200LM, 14H), Medium (400LM, 6H), and High (900LM, 3.5H).

충전 지침

1. 충전기 연결: Locate the USB-C charging port on the side of the light. Open the protective cover and insert the provided USB-C cable.
2. 충전 상태 모니터링: An LED indicator will illuminate red to show that the device is charging.
3. 완전 충전 표시: The LED indicator will turn green when the battery is fully charged. A full charge typically takes approximately 2 hours.
4. 연결 해제: Once fully charged, disconnect the USB-C cable and close the protective cover to maintain water resistance.

주의: Do not operate the light while it is charging.

Image: Close-up of the EverBrite work light showing the USB-C charging port and the red/green LED charging indicators.

유지

• 청소: 부드러운 천으로 빛을 닦아주세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
• 저장: Store the work light in a cool, dry place away from direct sunlight when not in use.
• 배터리 관리 : To prolong battery life, charge the device fully before long-term storage and recharge every 3-6 months.

문제 해결

• 조명이 켜지지 않음:
  • 배터리가 충전되었는지 확인하십시오. 전원에 연결하고 충전 표시등을 확인하십시오.
  • 전원 버튼을 꼭 누르세요.
• 충전이 안 됨:
  • 충전 케이블과 어댑터가 제대로 작동하는지 확인하십시오.
  • 충전 포트가 깨끗하고 이물질이 없는지 확인하세요.
• Magnets Not Holding Securely:
  • Ensure the surface is clean and metallic.
  • Use the adjustable straps and hooks for additional support, especially on uneven or painted surfaces.

명세서

안전 정보

• Do not look directly into the light source when operating on high brightness to avoid eye strain.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 제품을 분해하거나 개조하지 마십시오.
• Avoid exposing the product to extreme temperatures or direct flame.
• 충전하지 않을 때는 방수 기능을 유지하기 위해 충전 포트 덮개를 단단히 닫아 두십시오.

보증 및 지원

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official EverBrite web대지.