소개
Thank you for choosing the K-FEE Twins II Single Serve Coffee & Espresso Machine and Lattaero 4-in-1 Milk Frother Bundle. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions carefully before first use and keep them for future reference.

Image: The K-FEE Twins II Single Serve Coffee & Espresso Machine and Lattaero 4-in-1 Milk Frother Bundle in Black and Chrome.
중요 안전 지침
- 기기를 사용하기 전에 모든 지침을 읽으세요.
- 제품, 코드, 플러그를 물이나 기타 액체에 담그지 마십시오.
- 어린이가 가전제품을 사용하거나 어린이 근처에서 사용할 때는 면밀한 감독이 필요합니다.
- 사용하지 않을 때와 세척하기 전에는 콘센트에서 플러그를 뽑으세요. 부품을 끼우거나 떼기 전에 식힌 후, 그리고 기기를 세척하기 전에 식히세요.
- 코드나 플러그가 손상된 경우 또는 기기가 오작동하거나 어떤 식으로든 손상된 경우에는 기기를 작동하지 마십시오.
- 기기 제조업체에서 권장하지 않는 부속품을 사용하면 화재, 감전 또는 부상이 발생할 수 있습니다.
- 옥외에서는 사용하지 마십시오.
- 코드가 테이블이나 카운터 가장자리에 걸려 있거나 뜨거운 표면에 닿지 않도록 하세요.
- 뜨거운 가스나 전기 버너 근처 또는 가열된 오븐에 두지 마십시오.
- 항상 제품에 플러그를 먼저 꽂은 후, 코드를 벽면 콘센트에 꽂으세요. 전원을 끊으려면 모든 조절기를 "끔"으로 돌린 후 벽면 콘센트에서 플러그를 뽑으세요.
- 본 제품을 본래 용도 외에는 사용하지 마십시오.
- 커피를 끓이는 동안 뚜껑을 열면 화상을 입을 수 있습니다.
제품 구성 요소
K-FEE Twins II Coffee & Espresso Machine
- 물탱크(탈부착 가능)
- 브루 헤드
- 캡슐 홀더
- Drip Tray & Grid
- Control Panel (Espresso, Coffee, Hot Water buttons)
- 전원 버튼

이미지: 상세 view of the K-FEE Twins II machine, highlighting the water tank and brewing area.
Lattaero 4-in-1 Milk Frother
- Frother Jug
- 뚜껑
- Whisk (for frothing)
- Stirrer (for warming milk)
- Base with Control Buttons (Warm Thick Foam, Warm Creamy Foam, Warm Milk, Cold Foam)

Image: The K-FEE Lattaero 4-in-1 Milk Frother, showing its sleek design and control buttons.
설정
Initial Setup for K-FEE Twins II Machine
- 짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 나중에 운반하거나 보관할 수 있도록 포장을 보관하세요.
- 놓기: 기계를 물과 열원에서 멀리 떨어진, 안정적이고 평평하며 내열성이 있는 표면에 놓으세요.
- 청소: Before first use, wash the water tank, drip tray, and capsule holder with warm soapy water. Rinse thoroughly and dry.
- 물 탱크 채우기: Fill the water tank with fresh, cold drinking water up to the MAX level. Place it back onto the machine.
- 전원 켜기: Plug the machine into a grounded electrical outlet. Press the power button. The buttons will flash as the machine heats up.
- 첫 번째 헹굼 주기: Place a large cup under the brew head. Press the "Coffee" button (larger cup icon) to run a rinse cycle without a capsule. Repeat this process 2-3 times to prime the system and clean internal components.
Initial Setup for Lattaero Milk Frother
- 짐 풀기: Remove the frother and its accessories from the packaging.
- 청소: Wash the frother jug and whisk/stirrer with warm soapy water. Rinse and dry thoroughly. The base should only be wiped with a damp 옷감.
- 집회: Insert the desired whisk (frothing or stirring) onto the spindle at the bottom of the jug.
- 놓기: Place the frother jug onto its power base.
작동 지침
Brewing Coffee or Espresso with K-FEE Twins II
- 물 섭취를 확보하세요: Make sure the water tank is filled with fresh water.
- 전원 켜기: Press the power button if the machine is off. Wait for the buttons to stop flashing, indicating it's ready.
- 캡슐 삽입: Lift the lever to open the brew head. Insert a K-FEE compatible capsule into the capsule holder. Close the lever firmly.
- 컵 놓기: 원하는 컵을 물받이 트레이에 놓으세요.
- 양조 크기 선택:
- For Espresso: Press the "Espresso" button (smaller cup icon).
- For Coffee: Press the "Coffee" button (larger cup icon).
- 캡슐 꺼내기: After brewing, lift the lever to eject the used capsule into the internal collection bin. Close the lever.
- 뜨거운 물 기능: To dispense hot water, ensure no capsule is inserted, and press the "Hot Water" button (steam icon).
Programming Brew Volume: You can customize the brew volume for each button.
- Ensure the machine is ready (buttons solid).
- Insert a capsule (or no capsule for hot water).
- Press and hold the desired brew button (Espresso, Coffee, or Hot Water).
- Release the button when your cup reaches the desired fill level. The machine will remember this setting for future brews.

Image: The K-FEE Twins II machine actively brewing coffee into a glass cup.
Using the Lattaero 4-in-1 Milk Frother
- Prepare Jug: Ensure the frother jug is clean and the correct whisk/stirrer is inserted.
- 우유 추가: Pour cold milk into the jug. Do not exceed the MAX fill lines indicated inside the jug (lower line for frothing, upper line for warming).
- 기능 선택 : Place the lid on the jug and place the jug on the power base. Press the desired button on the base:
- Warm Thick Foam: For dense, rich foam.
- Warm Creamy Foam: For lighter, smoother foam.
- 따뜻한 우유: For heated milk without foam (use stirrer).
- 콜드폼: For cold, frothed milk.
- 완성: The frother will automatically stop when the cycle is complete. Carefully remove the jug from the base and pour the frothed or warmed milk.

Image: The K-FEE Lattaero Milk Frother pouring frothed milk into a glass, ready for a latte or cappuccino.
유지
Daily Cleaning (K-FEE Twins II)
- Drip Tray & Capsule Bin: Empty and rinse the drip tray and used capsule collection bin daily. Wash with warm soapy water, rinse, and dry.
- 수조: Rinse the water tank daily and refill with fresh water. Clean with warm soapy water weekly.
- 외부: 부드러운 천으로 기기 외부를 닦아주세요.amp 천으로 닦아주세요. 연마성 세제를 사용하거나 기기를 물에 담그지 마세요.
Daily Cleaning (Lattaero Milk Frother)
- Frother Jug & Whisk: Immediately after each use, rinse the frother jug and whisk with water. For thorough cleaning, wash with warm soapy water, rinse, and dry. The jug is not dishwasher safe.
- 베이스: Wipe the frother base with a soft, damp 천으로 덮어주세요. 받침대를 물에 담그지 마세요.
Descaling (K-FEE Twins II)
Descaling is essential to maintain machine performance and extend its lifespan. The frequency depends on water hardness and usage. It is recommended every 3-6 months.
- 솔루션 준비: Use a K-FEE approved descaling solution mixed with water according to the descaler's instructions. Fill the water tank with this solution.
- 석회질 제거 시작: Place a large container (at least 1 liter) under the brew head.
- 실행 주기: Press and hold the "Coffee" and "Espresso" buttons simultaneously for 3 seconds to enter descaling mode. The buttons will flash alternately.
- 완전한 사이클: The machine will dispense the descaling solution in intervals. This process can take up to 20 minutes.
- 헹구기: Once the tank is empty, rinse the water tank thoroughly and fill it with fresh water. Run at least two full rinse cycles (using the "Coffee" button) to flush out any remaining descaling solution.
- Exit Descaling: The machine will automatically exit descaling mode after the rinse cycles.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기계가 켜지지 않습니다. | 플러그를 꽂지 않았습니다. 콘센트 문제입니다. | 전원 코드가 제대로 작동하는 콘센트에 제대로 꽂혀 있는지 확인하세요. |
| 커피 제공이 없습니다. | Water tank empty; machine not primed; brew head not closed properly; clogged needle. | Fill water tank. Run a rinse cycle. Ensure lever is fully closed. Clean the brew head needle (refer to maintenance). |
| 커피가 차갑거나 미지근합니다. | Machine not preheated; cups not preheated. | Allow machine to fully preheat (buttons solid). Pre-warm your cup with hot water. |
| Frother not frothing milk. | Incorrect whisk; milk level too high/low; milk type; jug not clean. | Ensure frothing whisk is used. Check milk levels (between MIN/MAX frothing lines). Use cold, fresh milk (dairy or plant-based suitable for frothing). Clean jug thoroughly. |
| 기계에서 누수가 발생하고 있습니다. | 물탱크가 제대로 장착되지 않았습니다. 물받이가 가득 찼습니다. 내부 밀봉에 문제가 있습니다. | Ensure water tank is firmly in place. Empty drip tray. If leaking persists, contact customer support. |
| Buttons flashing continuously. | Machine heating up; descaling required. | Wait for buttons to become solid. If flashing persists after heating, descaling may be needed. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact K-FEE customer support.
명세서
- 모델: K-FEE Twins II
- 상표: K-FEE
- Dimensions (Coffee Machine): 13인치 깊이 x 8인치 너비 x 11인치 높이
- Weight (Coffee Machine): 약 14.4파운드
- 물탱크 용량: 78플루이드 온스
- 특별 기능: Auto Shut-Off, Dual Pressure System, Programmable Brew Volume, Removable Water Tank
- Frother Model: Lattaero 4-in-1 Milk Frother
- Frother Functions: Warm Thick Foam, Warm Creamy Foam, Warm Milk, Cold Foam
- 힘: 120V, 60Hz, 1400W (Typical for similar appliances, specific wattage not provided in input)
보증 및 지원
K-FEE products are manufactured with high-quality materials and are subject to rigorous quality control. This appliance is warranted against manufacturing defects for a period of 1년 from the date of purchase. This warranty does not cover damage caused by misuse, neglect, accident, alteration, or improper installation.
For warranty claims, technical support, or to purchase replacement parts, please contact K-FEE customer service:
- Web대지: www.k-fee.us
- 이메일: support@k-fee.us (Example email, actual not provided)
- 핸드폰: 1-800-XXX-XXXX (구ample phone, actual not provided)
Please have your model number (Twins II) and proof of purchase ready when contacting support.