FeinTech AX310 HDMI 2.1 오디오 추출기 사용 설명서

1. 서론

The FeinTech AX310 is an advanced HDMI 2.1 audio extractor designed to provide flexible audio routing for your home theater system. It allows you to separate the audio signal from an HDMI source and send it to an eARC/ARC compatible soundbar, while simultaneously passing the video signal to your display (TV, monitor, or projector). This device supports high-resolution video formats up to 8K at 60Hz and 4K at 120Hz, including HDR and Dolby Vision, along with gaming features like Variable Refresh Rate (VRR) and Auto Low Latency Mode (ALLM). It also supports all HDMI eARC audio formats, such as Dolby Atmos, DTS:X, and Dolby True HD. The AX310 is ideal for integrating modern soundbars with displays that lack eARC/ARC functionality or for resolving potential audio delay issues.

2. 안전 지침

• Ensure the correct power adapter is used. Using an incorrect power supply may damage the device and void the warranty.
• 기기를 습기, 비 또는 극한 온도에 노출시키지 마십시오.
• 라디에이터, 난방기, 스토브 또는 기타 열 발생 기기와 같은 열원 근처에 기기를 두지 마십시오.
• 기기를 분해하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 맡기십시오.
• 장치를 강한 자기장에서 멀리 두십시오.
• 기기의 과열을 방지하기 위해 기기 주변에 적절한 환기가 이루어지도록 하십시오.

3. 패키지 내용

수령 시 패키지 내용물을 확인하여 모든 품목이 들어 있고 손상되지 않았는지 확인하세요.

• FeinTech AX310 HDMI 2.1 오디오 추출기
• 전원 어댑터(DC 5V)
• 사용자 설명서

FeinTech AX310 HDMI 2.1 Audio Extractor with included power adapter and user manual.

4. 제품 오버view

4.1 전면 패널

Front panel of the FeinTech AX310, showing power indicator, input/output indicators, eARC button, EDID switch, and service port.

• 전원 표시기: 기기의 전원이 켜지면 켜집니다.
• IN 표시기: Illuminates when an HDMI source is connected to the IN port.
• 출력 표시기: Illuminates when a display is connected to the TV(eARC) OUT port.
• Soundbar eARC Indicator: Illuminates when a soundbar is connected to the eARC OUT Soundbar port.
• eARC 버튼: Toggles between audio extraction modes (from source or from TV eARC).
• EDID Switch (1/0): Allows manual configuration of EDID settings to control supported audio and video formats.
• 서비스 포트: For firmware updates and technical service.

4.2 후면 패널

Rear panel of the FeinTech AX310, displaying HDMI IN, TV(eARC) OUT, Soundbar eARC OUT, and DC 5V power input.

• IN (Source): HDMI input for connecting your source device (e.g., PS5, Xbox, PC, Streaming Box).
• OUT (TV eARC): HDMI output for connecting to your display (TV, monitor, projector). This port supports eARC/ARC functionality if your display also supports it.
• eARC OUT (Soundbar): Dedicated HDMI output for connecting to your eARC/ARC compatible soundbar.
• DC 5V : 동봉된 전원 어댑터의 전원 입력 단자입니다.

5. 설정 및 연결

Follow these steps to connect your FeinTech AX310 audio extractor:

1. HDMI 소스 연결: Connect an HDMI cable from your source device (e.g., gaming console, streaming box, Blu-ray player, PC) to the IN (Source) port on the AX310.
2. 디스플레이 연결: 다른 HDMI 케이블을 연결하세요. OUT (TV eARC) port on the AX310 to an HDMI input on your display (TV, monitor, projector).
3. 사운드바 연결: Connect a third HDMI cable from the eARC OUT (Soundbar) port on the AX310 to the eARC/ARC input on your soundbar.
4. 전원 연결: Plug the included DC 5V power adapter into the 직류 5V port on the AX310, then plug the adapter into a power outlet.
5. 전원 켜기: Power on all connected devices (source, display, soundbar, and AX310).

Connection diagram showing an HDMI source connected to the AX310, with video routed to a TV and audio to a soundbar.

Example connection diagram with an Xbox console, AX310, TV, and Sonos soundbar.

6. 사용 설명서

6.1 eARC Audio Extraction

The AX310 can extract audio either directly from the HDMI source connected to its IN port or from the audio return channel (eARC/ARC) of your connected TV. Use the eARC 버튼 on the front panel to switch between these modes. This allows you to ensure your soundbar receives the optimal audio signal, whether it originates from your source device or from smart TV apps.

6.2 EDID 관리

그만큼 EDID switch (1/0) on the front panel allows you to manage the Extended Display Identification Data. EDID communicates the display's capabilities (supported resolutions, audio formats) to the source device. Adjusting this switch can help resolve compatibility issues or ensure specific audio/video formats are prioritized. Refer to the detailed EDID settings in the full manual for specific configurations.

6.3 HDMI CEC Control

The AX310 supports HDMI Consumer Electronics Control (CEC), which enables connected devices to communicate and control each other. This feature allows you to control your soundbar's volume using your TV remote or source device remote, provided that:

• Your TV supports ARC/eARC and has CEC enabled.
• Your source device (e.g., Apple TV, Fire TV) is capable of directly controlling the soundbar.

If you experience issues with volume control via CEC, especially with soundbars that rely on infrared (IR) for volume, you may need to configure your soundbar to learn IR commands from your TV remote or configure your source device to send IR volume commands. Consult your soundbar's and source device's manuals for specific instructions on IR learning or remote control setup.

7. 유지관리

To ensure the longevity and optimal performance of your FeinTech AX310, follow these simple maintenance guidelines:

• 청소: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners, aerosols, or abrasive chemicals, as these can damage the finish or internal components.
• 통풍: Ensure the device is placed in a location with adequate airflow to prevent overheating. Do not block any ventilation openings.
• 저장: 장기간 사용하지 않을 경우, 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
• 케이블 연결: Periodically check all HDMI and power cable connections to ensure they are secure. Loose connections can lead to signal loss or intermittent issues.

8. 문제 해결

If you encounter issues with your FeinTech AX310, please refer to the following common troubleshooting steps:

• 오디오 출력 없음:
  • 모든 HDMI 케이블이 올바른 포트에 제대로 연결되어 있는지 확인하십시오.
  • Ensure your soundbar is powered on and set to the correct HDMI input.
  • 확인하세요 eARC 버튼 setting on the AX310. Try toggling it to switch audio extraction modes.
  • 조정하다 EDID 스위치 settings. Incorrect EDID can prevent audio formats from being recognized.
  • Confirm your source device and soundbar support the desired audio format (e.g., Dolby Atmos).
• 비디오 출력 없음:
  • Ensure the AX310 is powered on (Power indicator should be lit).
  • Check all HDMI cables for secure connections. Try different HDMI cables if possible.
  • Verify your display is powered on and set to the correct HDMI input.
  • Test the source device directly connected to the display to rule out source or display issues.
• 오디오 지연(립싱크 문제):
  • While the AX310 is designed to mitigate audio delay, some systems may still require adjustments. Check for audio delay settings on your TV, soundbar, or source device and adjust as needed.
  • Ensure the latest firmware is installed on all devices, including the AX310 (if available via the SERVICE port).
• HDMI CEC Control Not Working:
  • Ensure CEC (often called Anynet+, Bravia Sync, Simplink, etc.) is enabled on your TV and source devices.
  • Verify that your TV's ARC/eARC port is being used for the AX310's TV output.
  • If your soundbar uses an IR remote for volume, you may need to configure your soundbar to learn the IR codes from your TV remote, or configure your source device (e.g., Apple TV) to send IR volume commands. Refer to your soundbar and source device manuals for IR learning instructions.

9. 사양

10. 보증 및 지원

10.1 보증 정보

FeinTech products are covered by a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official FeinTech web자세한 보증 약관은 해당 사이트를 참조하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

10.2 기술 지원

If you require technical assistance or have questions regarding the operation of your FeinTech AX310, please contact FeinTech customer support. Our dedicated team is available to provide expert assistance and ensure your satisfaction.

For support, please visit the official FeinTech web자세한 내용은 해당 사이트를 참조하거나 제품 포장에 제공된 연락처 정보를 참조하세요.