1. 서론
Welcome to the world of high-fidelity audio with your new Pro-Ject T1 EVO BT Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. The T1 EVO BT combines classic analog sound with modern Bluetooth connectivity, offering a versatile listening experience.
Image: The Pro-Ject T1 EVO BT Turntable in Gloss Black, showcasin세련된 디자인과 주요 구성 요소들을 갖추고 있습니다.
2. 안전 지침
Please read these instructions carefully before using the turntable. Keep this manual for future reference.
- 전원 공급 장치: Only use the power supply provided with the unit. Ensure the voltage는 귀하의 지역 전원 공급 장치와 일치합니다.
- 물과 습기: Do not expose the turntable to rain, moisture, or excessive humidity. Avoid placing liquid-filled objects on the unit.
- 열원: 본 제품을 직사광선, 라디에이터, 난방 장치, 스토브 또는 기타 열을 발생시키는 기기에서 멀리 두십시오.
- 통풍: 적절한 환기를 유지하세요. 환기구를 막지 마세요.
- 청소: Disconnect the unit from the power supply before cleaning. Use a soft, dry cloth. Avoid liquid cleaners.
- 서비스: 제품을 직접 수리하려고 하지 마십시오. 모든 수리는 자격을 갖춘 서비스 담당자에게 맡기십시오.
- 놓기: 진동을 방지하고 정상적인 작동을 위해 턴테이블을 안정적이고 평평한 표면에 놓으십시오.
3. 상자 안에 무엇이 들어있나요?
포장을 풀 때 아래 나열된 모든 품목이 모두 들어 있고 상태가 양호한지 확인하세요.
- 먼지 커버
- 펠트 매트
- 전원 공급 장치
- High-quality phono/line RCA cable
- Pro-Ject T1 EVO BT Turntable Unit
- Pre-adjusted Ortofon OM10 cartridge (pre-installed on tonearm)
4. 설정
Follow these steps to set up your Pro-Ject T1 EVO BT Turntable:
- 놓기: Choose a stable, level surface away from direct sunlight, heat sources, and strong vibrations.
- 플래터 설치: Carefully place the heavy, low-resonance glass platter onto the spindle. Ensure it sits flush.
- 벨트 설치: Gently stretch the drive belt around the sub-platter and the motor pulley. Rotate the platter a few times manually to ensure the belt is correctly seated.
- 카트리지 및 톤암: The Ortofon OM10 cartridge is pre-adjusted. Ensure the tonearm is unlocked from its rest.
- 먼지 커버: Attach the adjustable hinge dust cover to protect your turntable from dust.
- 사이:
- Connect the high-quality phono/line RCA cable to your amplifier's phono input (for MM cartridges) or line input, depending on your setup and whether you use the internal preamp.
- Connect the ground wire from the turntable to your amp앰프의 접지 단자.
- Connect the power supply to the turntable and then to a wall outlet.
Image: Close-up of the Bluetooth switch, indicating its location for activation.
이미지: 상세 view of the RCA Line and Phono outputs, showing connectivity options.
Image: A close-up of the Ortofon OM10 cartridge mounted on the tonearm, highlighting its design.
General Turntable Setup Guide (External Video)
For a visual guide on general turntable setup, including platter, belt, counterweight, and tonearm balancing, please refer to this video. While this video features a different brand, the fundamental setup principles are widely applicable to many turntables, including your Pro-Ject T1 EVO BT.
Video: A general guide demonstrating the initial setup steps for a turntable, including component installation and tonearm adjustments. This video is provided by Fluance Audio and offers universal setup principles.
5. Operating Your Turntable
- 전원 켜기: 전원 스위치를 사용하여 턴테이블을 켜십시오.
- 속도 선택: Use the electronic speed change control to select 33 or 45 RPM, matching your record's speed.
- 장소 기록: 레코드판을 턴테이블 위에 조심스럽게 올려놓으세요.
- 재생 시작: Gently lift the tonearm using the cueing lever and position it over the desired track. Lower the cueing lever to drop the stylus onto the record. The turntable is fully automatic and can also be started with a dedicated start button, which will automatically move the tonearm and lower the stylus.
- 재생 중지 : At the end of the record, the tonearm will automatically return to its rest. You can also manually lift the tonearm or press the stop button for automatic return.
6. 블루투스 연결
The Pro-Ject T1 EVO BT features Bluetooth 5.0 with aptX HD for high-quality wireless audio streaming.
- 블루투스 활성화: Ensure your turntable is powered on. Locate the Bluetooth switch/button (refer to image in Setup section) and activate it. The indicator light should start blinking, indicating pairing mode.
- 편성: On your Bluetooth-enabled device (e.g., wireless speakers, headphones), enable Bluetooth and search for available devices. Select "Pro-Ject T1 BT" (or similar) from the list.
- 연결 확인: Once successfully paired, the Bluetooth indicator light on the turntable will turn solid.
- 재생: Start playing a record, and the audio will stream wirelessly to your connected Bluetooth device.
7. 유지관리
- 먼지 커버: Keep the dust cover closed when not in use to protect the turntable from dust and debris. Clean the dust cover with a soft, damp 옷감.
- 스타일러스 청소: 스타일러스 청소용으로 제작된 부드러운 브러시를 사용하여 스타일러스를 정기적으로 청소하십시오. 브러시는 스타일러스 뒤쪽에서 앞쪽으로 부드럽게 닦아주세요.
- 기록 정리: 탄소 섬유 브러시나 레코드 클리닝 용액을 사용하여 비닐 레코드에 쌓이는 먼지와 정전기를 제거하세요. 먼지와 정전기는 음질과 바늘 수명에 영향을 미칠 수 있습니다.
- Turntable Surface: Wipe the turntable chassis with a soft, dry cloth. Avoid abrasive cleaners.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 없음/소리 없음 | Power cable disconnected; Amplifier input incorrect; Internal preamp switch incorrect. | Check power connections. Ensure RCA cable is connected to the correct input (Phono for internal preamp OFF, Line for internal preamp ON). Verify internal preamp 스위치 설정. |
| 레코드 건너뛰기 | Turntable not level; Dirty stylus/record; Damaged stylus. | Ensure turntable is on a level surface. Clean stylus and record. Replace stylus if damaged. |
| 블루투스가 연결되지 않습니다 | Turntable not in pairing mode; Device too far; Interference. | Ensure Bluetooth is activated and blinking on turntable. Move device closer. Reduce interference from other wireless devices. |
| Sub-platter not spinning | Belt dislodged or broken; Motor issue. | Check and re-seat the drive belt. If the problem persists, contact support. |
9. 사양
- 제품 크기: 13.19 x 4.33 x 16.34 인치
- 품목 무게: 8.8파운드(4킬로그램)
- 품목 모델 번호: 9120129864800
- 상표: 프로젝트
- 최대 회전 속도: 45 RPM
- 재료: Aluminum, Glass, Plastic/Metal (Cartridge)
- 스타일: T1 Evo BT
- 색상: 광택 블랙
- 호환 장치: Headphone, Laptop, Personal Computer, Smartphone, Speaker
- 모터 유형: 벨트 구동 식
- 무선 오디오: Bluetooth 5.0 with aptX HD
- 사전amp: Internal, Switchable, Compatible with Multiple Inputs
- Included Cartridge: Pre-Adjusted Ortofon OM10
- 톤암 : 8.6" Single-Piece Aluminum
- 섀시 : CNC-Machined, No Hollow Spaces
- 장인정신: 유럽에서 수작업으로 제작
10. 보증 및 지원
For warranty information and technical support, please refer to the official Pro-Ject Audio Systems web사이트를 방문하거나 공인 대리점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
온라인 지원: 방문하세요 Pro-Ject Store on Amazon 추가 자료 및 연락처 정보는 여기를 참조하세요.