Pro-Ject T1 Evo 포노 턴테이블 사용 설명서

소개

The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.

설치 가이드

1. 풀기 및 배치

포장에서 모든 구성품을 조심스럽게 꺼내십시오. 턴테이블을 직사광선, 열원 및 과도한 진동을 피해 안정적이고 평평한 곳에 놓으십시오. 제품 주변에 충분한 환기가 이루어지도록 하십시오.

Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.

Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.

2. 조립

1. 접시를 스핀들 위에 올려놓으세요.
2. Carefully place the felt mat on top of the platter.
3. Attach the dust cover by aligning its hinges with the slots on the turntable's base.

3. 연결

Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your amp앰프의 접지 단자는 험 노이즈를 최소화합니다.

Figure 3: Rear connections for RCA output and ground wire.

Connect the power adapter to the turntable and then to a wall outlet.

작동 지침

1. 전원 켜기/끄기

Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.

그림 4: 전원 스위치 위치.

2. 레코드 재생

1. Ensure the dust cover is open or removed.
2. Place your vinyl record onto the felt mat on the platter.
3. Carefully remove the stylus protector from the cartridge.
4. 톤암 리프트 레버를 사용하여 톤암을 들어 올리십시오.
5. 원하는 레코드 시작 홈 위로 톤암을 부드럽게 이동시키세요.
6. Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
7. To stop playback, lift the tonearm using the lever and return it to its rest.

Figure 5: Tonearm and Ortofon OM 10 cartridge.

Figure 6: Ortofon OM 10 cartridge detail.

3. 블루투스 연결

The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.

유지

1. 턴테이블 청소

• Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.

2. 스타일러스 관리

• Regularly inspect the stylus for dust and debris.
• Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
• Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.

문제 해결

명세서

보증 및 지원

보증 정보

This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.

고객 지원

For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject web연락처 정보와 추가 자료는 해당 사이트를 참조하세요.

Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.