BIG RED T88007 Torin 7 Gallon Portable Air Tank User Manual

1. 중요한 안전 정보

Read and understand all safety warnings and instructions before operating this portable air tank. Failure to follow these instructions may result in serious injury or property damage.

• 최대 압력: Do not exceed the maximum allowable working pressure (MAWP) of 125 PSI. Over-pressurizing the tank can cause it to rupture, leading to severe injury.
• 사용 전 검사: Before each use, inspect the tank, hose, and fittings for any signs of damage, corrosion, or leaks. Do not use if damaged.
• 습기 제거: Compressed air contains moisture. Regularly drain accumulated moisture from the tank to prevent corrosion and maintain tank integrity.
• 눈 보호: Always wear ANSI-approved safety goggles or glasses when operating or servicing the air tank.
• 청력 보호: Use hearing protection when operating air compressors to fill the tank, as noise levels can be high.
• 통풍: Ensure adequate ventilation when filling or using the air tank.
• 어린이와 구경꾼: 어린이와 주변인이 작업 영역에 접근하지 못하도록 하십시오.
• 제안 65 경고: 이 제품에는 캘리포니아 주에서 암, 선천적 기형 또는 기타 생식 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있을 수 있습니다. 취급 후에는 손을 씻으십시오.

2. 제품 오버view

The BIG RED T88007 Torin Portable Air Tank is designed for convenient storage and transport of compressed air, ideal for inflating tires, sporting equipment, and other light-duty pneumatic tasks.

그림 2.1: Unique Features of the T88007 Air Tank. This image highlights the air pressure gauge (0-180 PSI), on/off adjustment dial with 1/8" NPT valve, 4-foot hose with 1/4" NPTM thread tire chuck, and the pressure bypass valve with manual override.

주요 특징:

• 용량: 7갤런
• 최대 허용 작동 압력: 125파운드
• 통합 압력계: Displays pressure in PSI and Bar.
• Safety Pressure Bypass Valve: With manual override for controlled pressure release.
• 호스: 36-inch (4-foot) industrial grade 1/4 inch male NPT air hose with standard tire chuck.
• 차단 밸브: Allows the tank to be filled and disconnected from a compressor without air draining.
• 휴대성: Durable steel construction with a convenient carry handle.

3. 설치 및 조립

The BIG RED T88007 portable air tank comes largely pre-assembled. Follow these steps for initial setup:

1. 짐 풀기: 공기탱크를 포장에서 조심스럽게 꺼내십시오. 배송 중 파손 여부를 확인하십시오.
2. 구성 요소 확인: Ensure all components are present: the air tank, pressure gauge, air hose with tire chuck, and shut-off valve assembly.
3. 호스 연결: The 36-inch air hose with tire chuck is typically pre-attached. Ensure it is securely tightened to the tank's outlet port.
4. 밸브 방향: Familiarize yourself with the shut-off valve. This valve controls the airflow from the tank to the hose.

4. 사용 설명서

4.1 Filling the Air Tank

1. Connect to Compressor: Connect an air compressor hose to the tank's inlet valve (typically a Schrader valve, similar to a car tire valve).
2. Close Shut-off Valve: Ensure the tank's shut-off valve (on the outlet) is in the closed position to prevent air from escaping during filling.
3. 채우기 탱크: Turn on your air compressor and begin filling the tank. Monitor the pressure gauge on the air tank.
4. 너무 많이 채우지 마십시오: Fill the tank only up to its maximum allowable working pressure of 125 PSI. Do not exceed this limit.
5. Disconnect Compressor: Once the desired pressure is reached, turn off the compressor and disconnect the hose from the air tank. The tank's inlet valve is designed to hold pressure.

4.2 Using the Air Tank

1. 항목에 연결: Attach the tire chuck on the air hose to the valve stem of the item you wish to inflate (e.g., car tire, bicycle tire, sports ball).


그림 4.1: Inflating a Bicycle Tire. The image shows the tire chuck connected to a bicycle tire valve stem.

2. Open Shut-off Valve: Slowly open the shut-off valve on the air tank to allow air to flow into the hose and the item being inflated.
3. 모니터 압력: Use a separate tire gauge or the tank's gauge (if applicable and accurate for the specific task) to monitor the inflation pressure of the item. Inflate to the manufacturer's recommended pressure.


그림 4.2: Inflating a Car Tire. The portable air tank is positioned next to a car tire while a person connects the hose to the tire valve.

4. Close Shut-off Valve: Once the desired pressure is reached, close the shut-off valve and disconnect the tire chuck from the item.
5. Pressure Bypass Valve: If you need to release pressure from the tank, use the manual override on the pressure bypass valve.

그림 4.3: Portability of the Air Tank. The image demonstrates the ease of carrying the air tank using its integrated handle.

5. 유지관리

Regular maintenance ensures the longevity and safe operation of your air tank.

• 습기 제거: Compressed air generates condensation. Regularly drain the moisture from the tank using the drain valve located at the bottom. This prevents internal corrosion.
• 누출을 검사하세요: Periodically check all connections (hose, gauge, valves) for air leaks. A soapy water solution can be applied to connections; bubbles indicate a leak.
• 깨끗한 외관: Keep the exterior of the tank clean and free of dirt or debris.
• 저장: Store the air tank in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the tank is depressurized before long-term storage.

6. 문제 해결

7. 사양

그림 7.1: Product Specifications. This image provides a visual summary of the tank's dimensions and key performance metrics.

• 모델: T88007
• 용량: 7갤런
• Maximum Allowable Working Pressure (MAWP): 125파운드
• 호스 길이: 36인치(4피트)
• 재료: Alloy Steel (Q235B)
• 품목 무게: 18.3 파운드
• 치수(길이 x 너비 x 높이): 20.3인치 x 9.8인치 x 12.6인치
• 색상: 빨간색

8. 보증 및 지원

This BIG RED T88007 Portable Air Tank is covered by a 1 년 제한 제조업체 보증.

For warranty claims, technical support, or replacement parts, please contact BIG RED customer service. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official BIG RED web사이트를 방문하거나 고객 지원 센터에 문의하세요.