Los Flexi KBT21 21-Inch Tall Toilet Instruction Manual

소개

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your new Los Flexi KBT21 21-Inch Tall Toilet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Keep this manual for future reference.

안전 정보

• 설치나 유지관리를 시작하기 전에 항상 주 수도 공급을 차단하세요.
• 설치하는 동안 장갑, 눈 보호 장비 등 적절한 개인 보호 장비(PPE)를 착용하세요.
• 세라믹 부품은 깨지거나 부서지지 않도록 조심스럽게 다루십시오.
• 누수를 방지하기 위해 모든 연결부가 제대로 조여졌는지 확인하되, 너무 세게 조이지 마십시오.
• 어떤 단계에 대해 확신이 없다면 자격을 갖춘 배관공에게 문의하세요.

패키지 내용

Verify that all components listed below are included in your package before beginning installation.

이미지 설명: A visual breakdown of the Los Flexi KBT21 toilet package contents, including the toilet bowl, pre-assembled tank, soft-close seat, wax ring, bolt kit, and seat installation kit.

• 21" Two-Piece Toilet Bowl
• 미리 조립된 변기 탱크
• 소프트 클로즈 변기 좌석
• 왁스 링 & 볼트 키트
• 변기 설치 키트

필요한 도구 및 재료(제공되지 않음)

The following tools and materials are necessary for installation but are not included in the package:

이미지 설명: A visual guide to the tools and materials required for toilet installation, such as wrenches, screwdrivers, a hacksaw, level, and a water supply line.

• 10" (254mm) Adjustable Wrench
• 12" (305mm) Pipe Wrench
• 활톱
• 드라이버
• 금속 File (파인 컷)
• 줄자
• 튜브 커터
• 수준
• 퍼티 나이프
• Water Supply Line (if not reusing existing)

설정 및 설치

Follow these steps carefully for a successful installation of your Los Flexi KBT21 toilet.

Part 1: Preparation Before Starting

1. 욕실의 주수도를 차단하세요.
2. (해당되는 경우) 기존 변기를 제거하고 플랜지 부분을 철저히 청소하십시오.
3. Ensure the floor is clean and level where the new toilet will be installed.

Part 2: Install the Flange

1. Apply waterproof primer to the drain pipe and the flange.
2. Apply PVC cement to the drain pipe and the flange.
3. Insert the flange into the drain pipe.
4. Mark screw positions with a pencil and secure the flange with screws.
5. Measure and mark installation positions for T-bolts.
6. Insert T-bolts onto the flange and cover with metal washers.
7. Mark the position of T-bolts with tapes on both sides for alignment.

Part 3: Install the Toilet Bowl

1. Place the toilet bowl on a soft surface to prevent any damage.
2. Attach a wax ring to the toilet outlet.
3. Lift the bowl, align the two mounting holes with the flange bolts, and attach it to the flange.
4. Gently press to tightly connect the bowl to the flange.
5. Remove positioning tape on both sides.
6. Set a level on the toilet bowl to ensure it is level.
7. Place the plastic washer, metal washer, and nut onto the T-bolt, then tighten them.
8. If the T-bolt is too long, cut it to the appropriate length and cover with a cap.

Part 4: Install the Tank to the Bowl

1. Insert the cone washer and bolt through the tank hole.
2. Secure them with a washer and nut.
3. Screw the rubber gasket onto the flush valve nut.
4. Attach the toilet tank onto the bowl.
5. From the bottom, place the rubber washer, metal washer, and wing nut, then hand-tighten them.
6. Set a level on top of the tank to ensure it's level.
7. For the pre-assembled water tank, install the flush lever by inserting it through the tank hole, attaching a rubber fitting, and tightening by hand.
8. Attach the chain to the flush lever.
9. Finally, press the lever to confirm it flushes normally.

Part 5: Connect to the Water Supply

1. Connect the water supply line to the tank's fill valve nut. (Fits 7/8" water supply line).
2. If necessary, use the included 1/2" fill valve adapter for 1/2" water supply lines.
3. Connect to the water supply valve on the wall.
4. Tighten the water supply line with a wrench.
5. Turn on the water supply and let the tank fill with water.
6. Check if the tank gasket is leaking.
7. Confirm there is no leakage, then cover the tank lid.
8. Check for leaks with the water supply line and at the toilet-floor connection.
9. After ensuring no leaks, apply sealant where the toilet base meets the floor.

Part 6: Install the Toilet Seat

1. Insert the hinge bolt into the mounting hole and tighten with a power drill. Repeat for the other side.
2. Align the toilet seat with the hinge bolts.
3. Insert the seat and make final adjustments.
4. Fully tighten the bolts on both sides.
5. Remove the seat and cover the bolt caps first.
6. Then reinsert the seat to complete the toilet seat installation.

작업

플러싱 메커니즘

The Los Flexi KBT21 toilet features an efficient 1.28 GPF siphonic flush system. To flush, simply press down on the chrome flush lever located on the side of the tank. The powerful 360° jet siphonic action ensures a clean bowl with minimal water usage.

이미지 설명: A visual representation of the 360° jet siphonic powerful flushing system in action, demonstrating its efficiency and water-saving capabilities (1.28 GPF).

소프트 클로즈 시트

The toilet is equipped with a soft-close seat and lid. This feature prevents slamming, reducing noise and potential damage. To close, simply push the seat or lid down gently, and it will lower slowly and quietly on its own.

이미지 설명: The soft-close and high-quality seat feature, illustrating how the seat gently lowers without slamming, ensuring a quiet bathroom experience.

유지 보수 및 관리

Regular cleaning and maintenance will keep your Los Flexi KBT21 toilet in optimal condition.

청소 지침

• Use a soft cloth and mild, non-abrasive cleaners for all surfaces.
• Avoid using harsh chemicals, abrasive pads, or cleaners containing bleach, as these can damage the ceramic glaze and seat material.
• For the soft-close seat, use the quick-release mechanism for easy removal and thorough cleaning.
• Clean the exterior of the toilet, including the base and tank, regularly.

이미지 설명: 클로즈업 views highlighting the premium flush lever, elegant design, and smooth, high-gloss surface of the toilet, which facilitates easy cleaning and maintenance.

문제 해결

명세서

이미지 설명: A comprehensive diagram illustrating the dimensions of the Los Flexi KBT21 toilet from multiple angles, including height, depth, width, and rough-in measurements.

이미지 설명: This image displays the various certifications for the Los Flexi KBT21 toilet, including ADA Compliant, WaterSense Certified, MaP Premium Certified, Uniform Plumbing Code Certified, and HET (High Efficiency Toilet), ensuring quality and compliance.

보증 및 지원

보증 정보

Your Los Flexi KBT21 toilet is backed by a 2년 보증 from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims.

고객 지원

For any questions, assistance with installation, or warranty claims, please contact our dedicated customer support team. We are committed to ensuring your satisfaction and providing long-lasting comfort with every use.

연락처 정보는 저희 공식 웹사이트에서 확인하실 수 있습니다. web사이트나 소매업체를 통해 구매하세요.