BORUIT RJ-1156 LED Rechargeable Headlamp 사용자 설명서

1. 배터리 설치 및 초기 충전

The BORUIT RJ-1156 headlamp uses two rechargeable Lithium-Ion batteries. Ensure batteries are correctly inserted before first use. It is recommended to fully charge the headlamp before its initial operation.

This image illustrates the DC charging port, the battery indicator light, and the compartment for the two rechargeable batteries. The battery indicator shows red when charging and green when fully charged.

1. 헤드라이트 뒷면에 있는 배터리함을 찾으세요.amp 단위.
2. Open the compartment and insert the two Lithium-Ion batteries, ensuring correct polarity (+/-).
3. 배터리 칸을 단단히 닫으세요.
4. Connect the DC charging cable to the charging port on the battery pack.
5. Plug the other end of the charging cable into a compatible USB power adapter (not included).
6. The battery indicator light will show red during charging and turn green when fully charged.

2. 헤드밴드 부착

머리amp 편안한 착용감을 위해 조절 가능한 신축성 헤어밴드가 함께 제공됩니다.

1. 머리띠의 지정된 슬롯에 고무줄을 끼워 넣으세요.amp 단위.
2. Adjust the straps to ensure a snug and comfortable fit on your head.

3. Attaching the Bike Clip (Optional)

For bicycle use, the headlamp unit can be detached and mounted using the provided bike clip.

This image displays the headlamp unit separated from the headband and connected to the bike clip, ready for bicycle mounting.

1. Locate the disassembly button at the bottom of the headlamp 단위.
2. Press the button and push the headlamp unit forward to detach it from the headband bracket.
3. Secure the bike clip to your bicycle handlebars.
4. Slide the detached headlamp unit onto the bike clip until it clicks into place.

1. 전원 켜기/끄기 및 모드 선택

This image highlights the waterproof and non-slip switch button for controlling the headlamp's functions.

머리amp features a single switch button for controlling power and light modes.

1. 켜려면: Press the switch button once. The headlamp will activate in High White Light mode.
2. 모드를 변경하려면: Press the switch button repeatedly to cycle through the modes: High White Light → Low White Light → Red Light.
3. 끄기: After cycling through all modes, press the button one more time, or press and hold the button for approximately 2 seconds in any mode.

This image demonstrates the three available light modes: High White Light, Low White Light, and Red Light, showing their appearance in a dark environment.

2. L 조정amp 헤드 각도

This image illustrates the 90-degree adjustable lamp head, allowing users to direct the light as needed.

머리amp unit can be tilted up to 90 degrees to direct the light beam precisely where needed.

1. Gently hold the headlamp unit and tilt it up or down to your desired angle.
2. 이 메커니즘은 선택한 각도를 안전하게 고정하도록 설계되었습니다.

3. Using the Red Light Function

This image demonstrates the red light function, highlighting its utility for preserving night vision and avoiding disturbance to animals, such as during beekeeping.

The red light mode is beneficial for specific situations:

• Night Vision Preservation: Red light does not easily stimulate the eyes, helping to maintain natural night vision.
• 야생동물 친화적: Less likely to startle animals, making it suitable for hunting, fishing, or wildlife observation.
• 곤충 유인: Red light is less attractive to insects compared to white light.

1. 청소

• 헤드를 닦아주세요amp 부드럽고 d 재질의 몸체amp 옷감.
• 연마성 세척제나 용제를 사용하지 마십시오. 마감재나 전자 부품이 손상될 수 있습니다.
• 방수 기능을 유지하려면 충전 포트 덮개가 단단히 닫혀 있는지 확인하십시오.

2. 배터리 관리 및 보관

• Recharge the batteries regularly, even if the headlamp is not frequently used, to prolong battery life.
• 헤드를 저장하세요amp 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
• If storing for an extended period, charge the batteries to approximately 50% capacity.