SYNCO XTalk XPro 무선 인터콤 헤드셋(Xpro5 5인용) 사용 설명서

소개

This manual provides detailed instructions for the setup, operation, and maintenance of your SYNCO XTalk XPro Wireless Intercom Headset (Xpro5 Five Users). Please read this guide thoroughly to ensure optimal performance and longevity of your device. The SYNCO XTalk XPro series features enhanced signal reception, advanced Acoustic Echo Cancellation (AEC) technology, and a MasterFree Algorithm for flexible team communication.

상자 안에 무엇이 들어있나요?

The SYNCO XTalk XPro5 package includes the following components:

• 5 x SYNCO XTalk Xpro Headsets
• 3 x Charging Stations
• 충전식 리튬 이온 배터리 5개
• 3 x USB-C 충전 케이블
• 5 x Mic Windshields
• 5 x One-Ear Foam Cushions
• 1 x 보관 가방

For a visual guide to the package contents, please refer to the unboxing video below.

설정

Follow these steps to set up your SYNCO XTalk XPro headsets:

1. 배터리 충전: Ensure all Lithium Ion batteries are fully charged using the provided charging stations.
2. 배터리 삽입: Open the battery compartment on each headset and insert a charged battery.
3. Attach Mic Windshield: Place the mic windshield onto the microphone boom arm for improved audio clarity.
4. 전원 켜기: Locate the power toggle switch on the headset. Push the switch upwards to power on the headset. The headset is pre-paired from the factory (except XPro1) and ready to use. To ensure successful auto-reconnect, turn on the headsets in the sequence of Master → Level 1.
5. 전원 끄기 : Push the power toggle switch downwards to power off the headset.

작동 지침

The SYNCO XTalk XPro headsets are designed for intuitive team communication. Here are key operating features:

• MasterFree Algorithm: The system intelligently designates a master headset, allowing any unit to function as the master. This ensures continuous communication even if a master headset is lost or runs out of battery.
• 향상된 신호 수신: An additional antenna design provides more stable communication over distances up to 500m (1,640ft) Line of Sight (LOS).
• AEC AI Technology: Active Acoustic Echo Cancellation (AEC) spanning 150Hz to 7kHz eliminates echoes, reverberation, and ambient noise, ensuring clear voice recognition in noisy environments.
• One-Button Remote Muting: The master headset can instantly mute all remote headsets, useful for managing conversations.
• 부스트 모드: Enable intelligent spectrum switching with a click of a button to enhance communication quality.
• 실시간 모니터링: Utilize the 3.5mm jack for real-time audio monitoring from devices like cameras and recorders, allowing seamless communication while monitoring.

헤드셋 페어링

The SYNCO XTalk XPro headsets are designed for easy pairing. For initial setup or re-pairing, use the SYNCO EasyGo software.

1. Download EasyGo: Ensure you have the latest version of SYNCO EasyGo software, firmware, and voice packs from the official SYNCO web대지.
2. 헤드셋 연결: Connect one headset to your computer using the provided USB-C data cable.
3. 헤드셋 전원 켜기: Turn on the headset. If the connection status in EasyGo shows 'Not Connected', try reversing the cable on the headset end and reconnecting.
4. Select Firmware & Voice Pack: In EasyGo, select the appropriate firmware (e.g., X5-BP LOW for 5 users) and voice pack.
5. Initiate Firmware Update: For the first-time firmware update of an X series headset, long-press the '+' and '-' buttons on the headset simultaneously until you hear two beeps, then a third beep. Release the '+' button first, then the '-' button, and immediately click 'Install' in EasyGo.
6. 헤드셋 재시작: After successful installation, unplug the cable and restart the headset. Repeat this process for all headsets.
7. 페어링 프로세스: Once all headsets are updated, go to the 'Pairing' tab in EasyGo. Select the quantity of headsets (e.g., 5 for Xpro5). Click 'Start'. EasyGo will guide you to connect and power on headsets in the sequence of Master, Level 1, and Level 2.

펌웨어 업데이트

Regular firmware updates ensure your SYNCO XTalk XPro headsets have the latest features and performance improvements. Use the SYNCO EasyGo software for this process.

1. 업데이트 다운로드: Obtain the latest firmware and voice pack files from the official SYNCO web대지.
2. 헤드셋 연결: Connect one headset to your computer using the USB-C data cable.
3. Open EasyGo: Launch the SYNCO EasyGo software.
4. Select Firmware & Voice Pack: In the 'Install' tab, select the correct firmware file (e.g., X9_MAX_V2.0.5 for XMax) and the corresponding voice pack.
5. 업데이트 설치: Click 'Install' to begin the firmware update. Follow any on-screen prompts.
6. 헤드셋 재시작: After the installation is complete, unplug the data cable and restart the headset.
7. Repeat for all headsets: Perform this update process for each headset in your system.

유지

Proper maintenance ensures the longevity and performance of your headsets:

• 청소: Use a soft, dry cloth to clean the headset surfaces. Avoid harsh chemicals or abrasive materials.
• 저장: Store headsets in the provided storage bag in a cool, dry place when not in use.
• 배터리 관리 : Fully charge batteries before long-term storage. Avoid extreme temperatures.

문제 해결

문제가 발생하면 다음의 일반적인 문제 해결 단계를 시도해 보세요.

• 소리가 안 나거나 연결이 불안정합니다: Ensure headsets are fully charged and within range. Check pairing status via EasyGo.
• 낮은 오디오 품질: Verify mic windshields are properly installed. Check for environmental interference.
• 헤드셋 전원이 켜지지 않음: Ensure battery is correctly inserted and charged.
• 펌웨어 업데이트 문제: Ensure the data cable is securely connected and try reversing it. Confirm the correct firmware version is selected in EasyGo.

명세서

보증 및 지원

For warranty information and technical support, please visit the official SYNCO web해당 사이트를 방문하거나 고객 서비스에 문의하세요. 보증 청구를 위해 구매 영수증을 보관하세요.