Fein Cordless Angle Grinder CCG 18-115-12 AS Instruction Manual

1. 서론

This manual provides essential information for the safe and effective operation, setup, and maintenance of your Fein Cordless Angle Grinder CCG 18-115-12 AS. This powerful and dust-resistant tool is designed for cutting, grinding, and deburring work on various materials. It features an 18V brushless motor, a 115 mm grinding wheel diameter, and is compatible with AMPShare ProCORE batteries.

2. 안전 지침

부상 및 공구 손상을 방지하기 위해 항상 다음 안전 수칙을 준수하십시오.

개인 보호 장비(PPE)를 착용하세요: 항상 안전 안경, 청력 보호 장비, 장갑, 방진 마스크를 착용하세요.
안전한 작업물: Ensure the material being worked on is firmly clamp작동 중 움직임을 방지하기 위해 고정되거나 단단히 고정되어 있습니다.
올바른 그립을 유지하세요: Hold the angle grinder firmly with both hands, ensuring a stable stance.
손상 여부 확인: Before each use, inspect the tool, battery, and accessories for any damage. Do not use damaged equipment.
올바른 액세서리를 사용하세요: Only use grinding and cutting discs that are rated for the tool's speed and diameter (115 mm).
가드 조정: Ensure the protective guard is correctly positioned to deflect sparks and debris away from you.
과도한 확장을 피하세요: Maintain balance and control at all times.
작업 공간을 깨끗하게 유지하세요: Remove flammable materials and ensure adequate ventilation.
전원 분리: Always remove the battery pack before making any adjustments, changing accessories, or performing maintenance.
재시작 보호: The tool features restart protection. If power is interrupted, the tool will not restart automatically when power is restored.
전자식 과부하 보호 장치: The tool will shut off if overloaded to prevent damage. Reduce pressure and allow the tool to cool.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

1 x Fein Cordless Angle Grinder CCG 18-115-12 AS
1 x Separation Protection Cover
1 x Tool-free Quick Release Nut
1 x Anti-vibration Handle
1 x Key (for disc changes if not using quick release)
1 x Plastic Tool Box (L-BOXX 238)

4. 설정

Before operating the angle grinder, ensure it is properly assembled and configured.

4.1 배터리 설치

Ensure the battery is fully charged. The Fein Cordless Angle Grinder is compatible with all 18V AMPShare ProCORE batteries.
배터리 팩을 도구의 배터리 포트에 맞춥니다.
배터리가 제자리에 단단히 고정될 때까지 포트에 밀어 넣습니다.
분리하려면 배터리의 분리 버튼을 누르고 밀어서 빼내십시오.

4.2 가드 조정

The separation protection cover must always be used. Adjust its position to provide maximum protection for the specific application.

Loosen the guard's locking mechanism.
Rotate the guard to the desired position, ensuring it deflects sparks and debris away from the operator.
Tighten the locking mechanism securely.

4.3 Disc Installation (Grinding/Cutting)

Always ensure the battery is removed before changing discs.

스핀들 잠금 버튼을 길게 누릅니다.
If using the tool-free quick release nut: Unscrew the quick release nut by hand. Remove the old disc and the lower flange.
Place the new 115 mm grinding or cutting disc onto the spindle, ensuring it sits correctly on the lower flange.
Screw the quick release nut back on and tighten it firmly by hand. Release the spindle lock.
If using a standard nut and key: Use the provided key to loosen and tighten the nut.

Man installing a grinding disc on the Fein Cordless Angle Grinder CCG 18-115-12 AS

Image: A user demonstrating the installation of a grinding disc onto the angle grinder. The tool-free quick release nut is visible.

4.4 Anti-vibration Handle Attachment

Attach the anti-vibration handle to either side of the gear housing for improved comfort and control during operation.

Screw the anti-vibration handle into one of the threaded holes on the side of the grinder head.
손으로 단단히 조여주세요.

5. 사용 설명서

Familiarize yourself with the tool's controls and proper operating techniques.

5.1 Powering On/Off and Speed Preselection

켜기: Slide the power switch forward. The tool features a soft start function for smooth power-up.
끄기: Slide the power switch backward to the OFF position.
Electronic Speed Preselection: Use the speed dial to select the desired idle speed between 2,500 and 8,500 min⁻¹. Adjust the speed according to the material and application.

5.2 Cutting and Grinding Techniques

Always maintain a firm grip and stable body position. Let the tool do the work; avoid excessive pressure.

Man using Fein Cordless Angle Grinder CCG 18-115-12 AS to grind a metal bar secured in a vise, sparks flying.

Image: A worker grinding a metal bar with the Fein angle grinder, demonstrating proper technique and safety gear.

연마: Apply light, even pressure. Move the grinder smoothly across the surface. The tool's vibration damper helps ensure smooth operation.
절단: For cutting, use a cutting disc and ensure the workpiece is securely clamped. Make straight cuts, allowing the disc to cut without forcing it.

Man using Fein Cordless Angle Grinder CCG 18-115-12 AS to cut a metal pipe secured in a vise, sparks flying.

Image: A worker cutting a metal pipe with the Fein angle grinder, showing the sparks generated during the process.

Man using Fein Cordless Angle Grinder CCG 18-115-12 AS to cut a metal bar, sparks flying.

Image: A worker performing a cutting operation on a metal bar with the Fein angle grinder, highlighting the tool's performance.

5.3 고급 기능

Blocking Monitoring: The tool is equipped with blocking monitoring, which helps prevent kickback if the disc jams.
온도 모니터링: Innovative cooling fin technology and temperature monitoring protect the motor and battery from overheating during intensive use.

6. 유지관리

정기적인 유지보수는 앵글 그라인더의 수명과 최적의 성능을 보장합니다.

청소: The robust motor housing is designed to be dust resistant. Regularly clean the tool's ventilation slots and exterior with a soft brush or compressed air to remove dust and debris. Ensure the battery is removed before cleaning.
디스크 검사: Before each use, inspect grinding and cutting discs for cracks, chips, or excessive wear. Replace damaged or worn discs immediately.
배터리 관리 : Store batteries in a cool, dry place. The Coolpack 2.0 technology helps extend battery life; however, avoid fully discharging batteries and charge them regularly.
일반 검사: Periodically check all screws and fasteners for tightness. Ensure the guard operates smoothly and locks securely.

7. 문제 해결

일반적인 문제와 해결 방법은 이 섹션을 참조하세요.

문제	가능한 원인	해결책
도구가 시작되지 않습니다.	배터리가 충전되지 않았거나 잘못 삽입되었습니다. 재시작 보호 기능이 활성화되었습니다.	Ensure battery is charged and correctly inserted. Cycle the power switch (OFF then ON) to reset restart protection.
작업 중 공구가 멈춥니다.	Electronic overload protection activated. Battery low. Temperature monitoring activated.	Reduce pressure on the tool. Replace or recharge battery. Allow tool to cool down.
과도한 진동.	Damaged or improperly installed disc. Loose handle.	Inspect and replace disc if damaged. Ensure disc is correctly installed and nut is tightened. Tighten anti-vibration handle.
Reduced cutting/grinding performance.	Worn or incorrect disc. Incorrect speed setting.	Replace with a new, appropriate disc. Adjust speed setting for the material.

8. 사양

Technical data for the Fein Cordless Angle Grinder CCG 18-115-12 AS:

모델: CCG 18-115-12 AS
배터리 용량tage: 18V(XNUMXV)
배터리 호환성: Li-ion/ProCORE Li-ion (AMPShare compatible)
모터: 무브러시
유휴 속도 : 2,500 - 8,500 min⁻¹ (stepless electronic speed preselection)
연삭 휠 직경: 115mm (XNUMXmm)
Elastic Sanding Disc Diameter: 115mm (XNUMXmm)
플랜지 : 엠 14
무게 (배터리 제외) : 2.20kg
제품 크기(길이 x 너비 x 높이): 35.7 x 25.3 x 44.2cm
재료: Metal, aluminium, copper, plastic
기능: Soft start, Restart protection, Electronic overload protection, Electronic speed preselection, Blocking monitoring, Vibration damper (4 additional), Temperature monitoring (Coolpack 2.0 technology)

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the official Fein website or contact your authorized Fein dealer. Keep your purchase receipt as proof of purchase.

Fein Official Web대지: www.fein.com

Fein CCG 18-115-12 AS