BenQ EX271Q

BenQ MOBIUZ EX271Q 게이밍 모니터 사용 설명서

Model: EX271Q

1. 서론

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your BenQ MOBIUZ EX271Q 27-inch 2K 180Hz Gaming Monitor. Please read this manual thoroughly before using the product to ensure proper functionality and to maximize your gaming and view경험.

앞쪽 view of the BenQ MOBIUZ EX271Q gaming monitor with a space-themed wallpaper.

Figure 1: BenQ MOBIUZ EX271Q Gaming Monitor (Front View)

2. 주요 특징

The BenQ MOBIUZ EX271Q monitor is designed to enhance your visual and gaming experience with advanced technologies:

  • AI Detail Enhancement: Optimizes image details for a vibrant and aesthetically pleasing 디스플레이.
  • Gamer-Experienced Color (PixSoul Engine): A revolutionary color technology that redefines color presentation for gaming.
  • KVM 기능: Seamlessly switch between multiple connected devices (e.g., PC, laptop) using a single keyboard and mouse.
  • 컬러 셔틀: Provides various authorized presets for popular games to optimize visual delicacy.
  • Eye-Care Technology and Ergonomics: Features designed to reduce eye strain and provide comfort during extended use.

3. 설정 가이드

3.1 패키지 내용

조립하기 전에 모든 구성 요소가 있는지 확인하세요.

  • BenQ MOBIUZ EX271Q Monitor Panel
  • 모니터 스탠드(베이스 및 넥)
  • 전원 케이블
  • HDMI 케이블
  • USB-C 케이블
  • 리모컨

3.2 모니터 스탠드 조립

  1. 긁힘을 방지하려면 모니터 패널을 부드럽고 깨끗한 표면에 뒤집어서 놓으세요.
  2. 스탠드 넥을 모니터 패널 뒷면에 부착하세요. 딸깍 소리가 나면서 제자리에 단단히 고정되는지 확인하세요.
  3. Attach the stand base to the bottom of the stand neck. Tighten the captive screw on the base to secure it.
뒤쪽 view of the BenQ MOBIUZ EX271Q monitor showing the stand attachment point and various input ports.

Figure 2: Rear Panel with Stand Attachment and Ports

3.3 모니터 연결

적절한 케이블을 사용하여 모니터를 컴퓨터나 다른 장치에 연결합니다.

  • 전원 연결: 전원 케이블을 모니터의 전원 입력 단자에 연결한 다음 전원 콘센트에 연결합니다.
  • 비디오 입력 :
    • For optimal performance, use the DisplayPort (DP 1.4) cable to connect to your graphics card.
    • Alternatively, use an HDMI (HDMI 2.0) cable for compatible devices.
    • For USB-C compatible devices, use the USB-C cable (65W Power Delivery supported).
  • USB 허브: Connect the USB-C cable to enable the monitor's built-in USB hub for peripherals.
Diagram showing a laptop connected to the BenQ MOBIUZ EX271Q monitor via USB-C, with a keyboard and mouse connected to the monitor, illustrating KVM functionality.

Figure 3: KVM Setup with USB-C, HDMI, and DisplayPort Connections

4. 사용 설명서

4.1 전원 켜기/끄기

Press the power button located on the monitor or use the remote controller to turn the monitor on or off.

4.2 온스크린 디스플레이(OSD) 메뉴

The OSD menu allows you to adjust various monitor settings. Access it using the joystick on the monitor or the dedicated buttons on the remote controller.

주요 OSD 설정:

  • 그림: 밝기, 대비, 선명도, 감마, 색온도.
  • 색상 모드: Standard, FPS, RPG, Racing, sRGB, HDR, User Defined.
  • 입력: Select between DisplayPort, HDMI, or USB-C inputs.
  • 오디오: Volume control for built-in speakers or headphone output.
  • 눈 건강 관리: Adjust settings for Low Blue Light and Brightness Intelligence Plus.

4.3 KVM 스위치 기능

The KVM (Keyboard, Video, Mouse) switch allows you to control multiple devices connected to the monitor with a single set of keyboard and mouse. Connect your keyboard and mouse to the USB ports on the monitor. When you switch video input sources (e.g., from PC via DisplayPort to laptop via USB-C), the keyboard and mouse will automatically switch to control the selected device.

Note: KVM switching times may vary depending on the connected devices and USB standards (e.g., 6 seconds for USB-C laptop, 8 seconds for USB 2.0 desktop).

4.4 원격 컨트롤러

The included remote controller provides convenient access to OSD settings, input switching, and volume control without needing to reach the monitor's physical buttons.

5. 유지관리

5.1 모니터 청소

모니터 화면과 c를 청소하려면asing:

  • 청소하기 전에는 항상 모니터의 전원을 끄고 전원 코드를 뽑으세요.
  • 부드럽고 보풀이 없는 천을 살짝 사용하십시오. damp물이나 부드럽고 연마성이 없는 화면 세척제로 닦으세요.
  • 세척제를 화면에 직접 뿌리지 마세요.
  • 강한 화학 물질, 용제 또는 연마재는 화면을 손상시킬 수 있으므로 사용을 피하십시오.asing.

6. 문제 해결

모니터에 문제가 발생하면 다음의 일반적인 해결책을 참조하세요.

문제가능한 해결책
화면에 이미지가 없습니다.
  • 전원 케이블이 제대로 연결되어 있고 전원 콘센트가 작동 중인지 확인하십시오.
  • Verify video input cable (DP, HDMI, USB-C) is properly connected to both monitor and source device.
  • Select the correct input source via the OSD menu or remote.
  • Check if the source device (PC, console) is powered on and outputting video.
이미지가 흐릿하거나 왜곡됩니다.
  • Adjust resolution and refresh rate settings on your source device to match monitor specifications (2560x1440, 180Hz).
  • 비디오 케이블에 손상이나 연결 불량이 있는지 확인하십시오.
  • OSD를 공장 초기 설정으로 재설정하십시오.
KVM 스위치가 작동하지 않습니다
  • Ensure the USB-C cable is connected from the monitor to the source device for USB data transfer.
  • Verify keyboard and mouse are connected to the monitor's USB hub ports.
  • Allow a few seconds for the switch to complete after changing video input.
오디오 없음
  • Increase monitor volume via OSD or remote.
  • 음원 기기의 오디오 출력 설정을 확인하세요.
  • Ensure headphones or external speakers are properly connected if used.

7. 사양

Detailed technical specifications for the BenQ MOBIUZ EX271Q monitor:

특징세부 사항
상표벤큐
모델 번호EX271Q
화면 크기27 인치
해결QHD 와이드 1440p (2560 x 1440 픽셀)
새로 고침 빈도180 Hz (via DisplayPort) / 165 Hz (general)
응답 시간1밀리초(GtG)
디스플레이 유형LED IPS
종횡비16시 9분
명도350니트
대비율400:1(네이티브)
색상 영역95% DCI-P3
View잉 각도178도
연결성1x DisplayPort 1.4, 2x HDMI 2.0, 1x USB-C (65W PD), USB Hub
적응형 동기화AMD FreeSync 프리미엄
특별 기능Eye Care, KVM, DisplayHDR 400, Pixsoul Engine, Remote Controller
제품 크기 (지름x너비x높이)32인치 깊이 x 18.89인치 너비 x 7.4인치 높이
품목 무게23.4 파운드

8. 보증 및 지원

8.1 보증 정보

The BenQ MOBIUZ EX271Q monitor comes with a 2년 제조업체 보증. 본 보증은 정상적인 사용 환경에서 발생하는 재료 및 제조상의 결함에 적용됩니다. 보증 청구를 위해 구매 증빙 서류를 보관해 주십시오.

8.2 고객 지원

For technical assistance, warranty service, or additional product information, please visit the official BenQ support website or contact their customer service department. Contact details can typically be found on the BenQ web사이트 또는 제품 포장.

© 2026 BenQ Corporation. 모든 권리 보유.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.