소개
This manual provides detailed instructions for the installation, operation, and maintenance of your MOUNTUP TV Mounts, including the MU0057 Full Motion Wall Mount and the MU0049 Under Cabinet Mount. Please read this manual thoroughly before installation to ensure safe and correct usage.
중요한 안전 정보:
- 설치 과정에 대해 확신이 없다면 설치를 시도하지 마십시오. 자격을 갖춘 전문가에게 문의하십시오.
- 설치 표면이 마운트와 텔레비전의 총 무게를 견딜 수 있는지 확인하십시오.
- Always use the provided hardware and follow the instructions carefully.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
- Periodically check all connections for tightness and security.
패키지 내용
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact MOUNTUP customer support.
- 1 x MOUNTUP MU0057 Full Motion TV Wall Mount
- 1 x MOUNTUP MU0049 Under Cabinet TV Mount
- Hardware Kit (screws, anchors, washers, spacers, etc.)
- 설치 설명서(본 문서)
이미지: 이상view of the MOUNTUP MU0057 Full Motion TV Wall Mount and MU0049 Under Cabinet TV Mount, including mounting plates and articulating arms.
명세서
MOUNTUP MU0057 풀모션 TV 벽걸이
| 특징 | 사양 |
|---|---|
| 호환 가능한 TV 크기 | 26~60인치 |
| 중량 용량 | 최대 77kg(35파운드) |
| VESA 호환성 | Max 400x400mm |
| 이동 유형 | Articulating, Full Motion |
| 재료 | Aluminum, Steel, or Composite Material |
MOUNTUP MU0049 Under Cabinet TV Mount
| 특징 | 사양 |
|---|---|
| 호환 가능한 TV 크기 | 13~32인치 |
| 중량 용량 | 최대 22kg(10파운드) |
| VESA 호환성 | 75x75mm, 100x100mm |
| 이동 유형 | Foldable, Tilt, Swivel, Rotation |
| 재료 | Aluminum, Steel, or Composite Material |
설정 및 설치
시작하기 전에:
- 필요한 도구(예: 드릴, 스터드 파인더, 수평계, 드라이버)를 모두 준비했는지 확인하십시오.
- Verify the wall structure (for MU0057) or cabinet structure (for MU0049) can safely support the weight.
- Unpack all components and identify them using the parts list in your physical manual.
Installation of MOUNTUP MU0057 Full Motion TV Wall Mount
This mount is designed for installation on wood studs or concrete/brick walls. 석고보드에만 설치하지 마십시오.
- 장착 위치 결정: Use a stud finder to locate the center of the wood studs. Mark the desired height for your TV.
- 벽면 플레이트 부착: Position the wall plate at the marked location. Use a level to ensure it is straight. Mark the drilling points.
- 드릴 파일럿 홀: Drill pilot holes according to the recommended drill bit size for your wall type (wood stud or concrete).
- 안전한 벽면 플레이트: 적절한 나사못과 와셔를 사용하여 벽판을 벽에 고정하십시오. 단단히 조이십시오.
- TV 브라켓 부착: Attach the two vertical TV brackets to the back of your television using the correct VESA screws, washers, and spacers. Ensure the brackets are centered and level.
- 벽걸이형 TV 거치대: Carefully lift the TV with the attached brackets and hook them onto the wall plate. Ensure the safety locks are engaged.
- 조정 및 보안: Adjust the tilt, swivel, and extension as desired. Tighten any adjustment screws to secure the TV in position.
Image: Components of the MOUNTUP MU0057 wall mount, including the wall plate, articulating arm, VESA plate, and a small level for installation.
Image: The MOUNTUP MU0057 long arm full motion TV mount extended from the wall, showing its maximum extension of 30 inches (750mm) and various arm segment lengths.
Image: The MOUNTUP MU0057 TV mount installed in a room corner, demonstrating its flexible arm folding capability for corner installations.
Installation of MOUNTUP MU0049 Under Cabinet TV Mount
This mount is designed for installation under cabinets or shelves. Ensure the cabinet/shelf material is sturdy enough to support the mount and TV weight.
- 장착 위치 결정: Choose a suitable location under a cabinet or shelf. Ensure there is enough clearance for the TV to fold up and down.
- 장착 플레이트 부착: Position the top mounting plate under the cabinet. Mark the drilling points.
- 드릴 파일럿 홀: 캐비닛 밑면에 드릴로 예비 구멍을 뚫으세요.
- 안전한 장착 플레이트: Attach the mounting plate using the provided screws. Tighten securely.
- TV 브라켓 부착: Attach the VESA plate to the back of your television using the correct VESA screws, washers, and spacers.
- Connect TV to Mount: Secure the TV (with VESA plate) to the main arm of the under cabinet mount.
- Test Folding Mechanism: Gently test the folding mechanism to ensure smooth operation and proper clearance.
Image: The MOUNTUP MU0049 under cabinet TV mount, showing its compact design and VESA plate.
Image: The MOUNTUP MU0049 under cabinet TV mount installed in a kitchen, illustrating its compatibility with VESA 75x75/100x100, max 32-inch screens, and 22 lbs weight capacity.
Image: The MOUNTUP MU0049 under cabinet TV mount demonstrating its foldable design, showing the TV folded up to 4 inches from the cabinet and folded back 135 degrees.
작동 지침
MOUNTUP MU0057 풀모션 TV 벽걸이
- 확장/수축: Gently pull or push the TV to extend or retract the arm.
- 받침: Rotate the TV left or right to achieve the desired view잉 각도.
- 경사: Loosen the tilt adjustment knobs (if applicable), adjust the screen angle up or down, and then re-tighten the knobs.
- 레벨 조정 : Some models allow for minor post-installation leveling adjustments. Refer to your physical manual for specific instructions.
Image: The MOUNTUP MU0057 double arm folding TV mount, illustrating its ability to extend and swivel, allowing the screen to cross the wall for optimal view주고받음.
MOUNTUP MU0049 Under Cabinet TV Mount
- 접기/펼치기: Gently pull down the TV to unfold it from its stored position. Push it up until it locks into place to fold it away.
- 경사: Adjust the screen's vertical angle by tilting the TV up or down.
- 받침: Rotate the TV horizontally (left or right) for optimal view주고받음.
- 회전: The mount allows for screen rotation (-90°/+90°) to switch between landscape and portrait orientation.
Image: The MOUNTUP MU0049 under cabinet TV mount demonstrating its adjustable viewing angles, including tilt (+3°/-10°), 360° swivel, and -90°/+90° rotation.
유지
- 정기 검사: 모든 나사, 볼트 및 연결부가 단단히 조여져 있는지 주기적으로 점검하십시오.
- 청소: 부드럽고 마른 천으로 마운트를 닦으십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제 사용은 피하십시오.
- 매끄럽게 하기: Moving parts are generally maintenance-free. If any movement becomes stiff, consult customer support before applying lubricants.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| TV is not level after installation (MU0057) | Wall plate not level; minor adjustment needed. | Check the wall plate with a level. Some mounts allow for post-installation leveling. Refer to your physical manual. |
| 산이 불안정해 보인다 | Screws not fully tightened; incorrect wall anchors used; wall/cabinet not strong enough. | Ensure all screws are securely tightened. Verify the mounting surface can support the weight. If unsure, consult a professional. |
| TV가 거치대에 맞지 않습니다. | VESA 마운트 패턴이 잘못되었거나, TV가 너무 크거나 무겁습니다. | Verify your TV's VESA pattern, size, and weight against the mount's specifications (MU0057: 26-60 inch, 77lbs, Max 400x400mm; MU0049: 13-32 inch, 22lbs, 75x75/100x100mm). |
| Difficulty moving the mount | Adjustment screws too tight; lack of lubrication. | Loosen any adjustment screws slightly. If the issue persists, contact customer support. |
보증 및 지원
MOUNTUP products are designed for durability and performance. For warranty information, technical support, or to report missing/damaged parts, please contact MOUNTUP customer service directly.
MOUNTUP Customer Support:
- Web대지: www.mountup.com
- Email: support@mountup.com
- 전화: 1-800-XXX-XXXX
Please have your model number (MU0057, MU0049) and purchase information ready when contacting support.
