xDuoo XQ-50 Pro3 DAC Headphone Ampliifier 사용 설명서

1. 서론

The xDuoo XQ-50 Pro3 is a versatile Bluetooth audio converter and DAC headphone amplifier designed to enhance your audio experience. It allows you to upgrade existing DACs or amplifiers with 24-bit lossless Bluetooth streaming, making it suitable for both vintage and modern audio setups. Featuring advanced chips like the Qualcomm QCC5125 for high-definition Bluetooth, CS8406 for digital conversion, and CS43131 for digital-to-analog conversion, the XQ-50 Pro3 delivers superior sound quality with multiple output options.

2. 패키지 내용

아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.

• 1 x Type-C 케이블
• 1 x 블루투스 안테나
• 1 x 사용자 설명서
• 1 x 6.35mm to 3.5mm converter

3. 제품 오버view

전면 패널

The front panel features a 1.3-inch color display, a 3.5mm headphone output jack, and a multi-function knob for volume control and menu navigation. A power/input selection button is also present.

후면 패널

The rear panel provides various input and output options, including RCA analog output, coaxial digital output, optical digital output, a USB-C input for PC DAC functionality, and a DC 5V power input. The Bluetooth antenna connector is also located here.

주요 특징

• 무선 연결 : Upgrade your existing DAC or amplifier with 24-bit lossless Bluetooth streaming.
• High-Definition Bluetooth Streaming: Features Qualcomm's QCC5125 chip, supporting SBC, AAC, aptX, aptX_LL, aptX_HD, and LDAC formats.
• Superior Signal Quality: CS8406 digital conversion chip ensures high-quality optical or coaxial outputs.
• CS43131 DAC 칩: Independent DAC chip for exceptional sound with high signal-to-noise ratio (SNR) and low distortion.
• 쉬운 탐색: 1.3-inch color screen displays Bluetooth status, encoding format, and samp링율.
• Rich Output Interfaces: Headphone output with 360mW power, RCA, Coaxial, and Optical outputs.

4. 설정 가이드

4.1 전원 연결

1. Connect the provided Type-C cable to the DC 5V input port on the rear panel of the XQ-50 Pro3.
2. Connect the other end of the Type-C cable to a compatible 5V/1A USB power adapter (not included) or a USB port on a computer.

4.2 블루투스 안테나 설치

1. Gently screw the Bluetooth antenna into the designated connector on the rear panel of the XQ-50 Pro3.
2. 최적의 Bluetooth 신호 수신을 위해 안테나가 단단히 고정되었는지 확인하세요.

4.3 오디오 연결

Choose one of the following connection methods based on your audio system:

• 한 사람에게 Amplifier/Active Speakers (RCA): Connect RCA cables from the XQ-50 Pro3's RCA OUT ports to the analog input of your amp리파이어 또는 액티브 스피커.
• To a DAC (Optical/Coaxial): Connect an optical or coaxial cable from the XQ-50 Pro3's OPTICAL OUT or COAXIAL OUT port to the corresponding digital input on your external DAC.
• 헤드폰에게: Plug your headphones into the 3.5mm headphone jack on the front panel. Use the included 6.35mm to 3.5mm converter if your headphones have a 6.35mm plug.
• PC USB DAC Mode: Connect a USB-C cable from the XQ-50 Pro3's USB input to your computer. The device will function as an external sound card.

5. 사용 설명서

5.1 전원 켜기/끄기

Press and hold the power button on the front panel to turn the device on or off.

5.2 입력 선택

Short press the power button to cycle through available input modes (Bluetooth, USB).

5.3 블루투스 페어링

When the XQ-50 Pro3 is in Bluetooth mode, the 1.3-inch color screen will display the Bluetooth connection status. If not connected, it will automatically enter pairing mode. On your source device (phone, tablet, computer), search for "xDuoo XQ-50 Pro3" in the Bluetooth settings and select it to pair. The screen will confirm the connection and display the active codec (e.g., AAC, LDAC) and samp링율.

5.4 볼륨 조절

Rotate the multi-function knob on the front panel clockwise to increase volume and counter-clockwise to decrease volume. This controls the headphone output and the analog RCA output level.

5.5 EQ 조정

The XQ-50 Pro3 supports EQ adjustment. Refer to the on-screen menu (accessed via the multi-function knob) to select and customize various EQ modes to tailor the sound to your preference.

6. 사양

7. 유지관리

• 청소: 기기 외부를 닦을 때는 부드럽고 마른 천을 사용하십시오. 액체 세척제나 용제 사용은 피하십시오.
• 저장: 본 기기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
• 손질: 장치를 떨어뜨리거나 강한 충격을 가하지 마십시오.
• 통풍: 기기의 과열을 방지하기 위해 기기 주변에 적절한 환기가 이루어지도록 하십시오. 통풍구를 막지 마십시오.

8. 문제 해결

9. 보증 및 지원

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or contact the retailer where the product was purchased. For technical support or further assistance, please reach out to the manufacturer or authorized service center.

자세한 내용은 다음을 방문하세요. AOSHIDA Store on Amazon.