Reliablit 새틴 니켈 전자식 데드볼트(키패드 및 통로 손잡이 포함) 사용 설명서

소개

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Reliablit Satin Nickel Electronic Deadbolt with Keypad and Passage Door Handle. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

이미지: 앞면 view of the Reliablit electronic deadbolt and the accompanying passage door handle in satin nickel finish.

안전 정보

• 설치 중에는 항상 현지 건축 법규 및 규정을 따르십시오.
• Do not use abrasive cleaners or solvents on the lock's finish. Use a soft, damp 청소용 천.
• Ensure batteries are inserted with correct polarity. Replace all batteries at the same time.
• 열쇠는 자물쇠에서 멀리 떨어진 안전한 곳에 보관하세요.
• Avoid exposing the electronic components to excessive moisture or extreme temperatures.

패키지 내용

Before beginning installation, verify that all parts are present:

• Electronic Deadbolt Assembly (Exterior Keypad and Interior Unit)
• Passage Door Handle Assembly
• 데드 볼트 래치
• 스트라이크 플레이트
• 장착 나사
• Keys (for deadbolt)
• 사용자 설명서
• 1 x 9V Battery (may be included or sold separately, check packaging)
• Screwdriver (may be included or sold separately, check packaging)

설정 및 설치

The Reliablit electronic deadbolt and passage handle are designed for easy installation, typically requiring only a screwdriver. Ensure your door thickness is between 1-3/8 inches and 1-3/4 inches.

1. 문 준비

Ensure the door is properly prepped with standard bore holes for both the deadbolt and the passage handle. If replacing an existing lock, remove the old hardware.

2. 데드볼트 잠금장치를 설치하십시오.

Insert the deadbolt latch into the edge bore hole of the door. Ensure the "UP" arrow on the latch is facing upwards. Secure with screws.

이미지: 클로즈업 view of the electronic keypad deadbolt, showing the numerical buttons and keyhole.

3. 외부 키패드 어셈블리를 설치합니다.

Feed the cable from the exterior keypad through the cross bore hole. Align the keypad assembly with the deadbolt latch and secure it to the door.

이미지: 측면 view of the electronic deadbolt and passage handle installed on a door, demonstrating how the components fit together.

4. Install the Interior Unit

Connect the cable from the exterior keypad to the interior unit. Mount the interior unit onto the door, ensuring the deadbolt spindle engages correctly with the latch mechanism. Secure with mounting screws.

5. 배터리 설치

Open the battery cover on the interior unit. Insert one 9V battery, ensuring correct polarity. Close the battery cover. The lock will perform a self-check.

6. Install Passage Door Handle

Follow the manufacturer's instructions for installing the passage door handle below the deadbolt. This typically involves inserting the spindle through the door and securing the interior and exterior levers.

이미지: 클로즈업 view of the passage door handle in satin nickel finish.

작동 지침

키리스 엔트리

To unlock the deadbolt using the keypad:

1. Enter your programmed user code (4-8 digits).
2. Press the "Lock/Unlock" button (often represented by a padlock icon).
3. The deadbolt will retract, allowing the door to be opened.

원터치 잠금

To lock the deadbolt from the outside:

• Simply press the "Lock/Unlock" button on the keypad. The deadbolt will extend.

수동 조작

• 밖에서: Use the provided key to manually lock or unlock the deadbolt.
• 안에서부터: Use the turn button on the interior unit to manually lock or unlock the deadbolt.

사용자 코드 프로그래밍

The lock supports up to 30 unique user codes. Refer to the specific programming instructions included with your lock for detailed steps on adding, deleting, or modifying user codes. This typically involves using a master code to enter programming mode.

유지

• 배터리 교체: The 9V battery typically lasts up to 3 years. Replace the battery when the low battery indicator activates (if applicable) or if the lock's operation becomes sluggish. Always replace with a new, high-quality 9V alkaline battery.
• 청소: Clean the lock's exterior with a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used. Avoid harsh chemicals, abrasive cleaners, or polishes as they can damage the finish and electronic components.
• 매끄럽게 하기: Periodically lubricate the deadbolt latch mechanism with a silicone-based lubricant to ensure smooth operation. Do not lubricate the keypad or electronic components.

문제 해결

명세서

보증 및 지원

RELIABILT provides a comprehensive warranty for this product:

• 기계적 결함 및 마감 품질 보증: 평생 보증.
• 전자제품 보증: 1년 보증.

For full details regarding warranty coverage, terms, and conditions, please refer to the official RELIABILT warranty documentation or visit the RELIABILT website. For technical support, troubleshooting assistance, or warranty claims, please contact RELIABILT customer service directly.