AQQA 3.7 Gallon Aquarium Starter Kit Instruction Manual

소개

This manual provides detailed instructions for the setup, operation, and maintenance of your AQQA 3.7 Gallon Aquarium Starter Kit, model GCA-AQ145. This kit is designed to be user-friendly, combining filtration, water circulation, oxygenation, LED lighting, and a water temperature display. Please read this manual thoroughly before use to ensure proper functioning and longevity of your aquarium.

Image: The AQQA 3.7 Gallon Aquarium Starter Kit, fully assembled with fish and plants.

패키지 내용

패키지를 열 때 모든 구성품이 들어 있고 손상되지 않았는지 확인하세요.

• 3.7 Gallon Glass Aquarium Tank
• Integrated Lid with LED Lighting System
• Built-in 3-in-1 Filter System (pump, sponge filter box)
• Water Temperature Display (LCD)
• 온도 프로브
• Water Change Hose
• 전원 어댑터
• Aroma Disk Holder (aroma disk not included)

설치 지침

1. 짐 풀기: 모든 구성품을 포장에서 조심스럽게 꺼내세요. 손상 여부를 확인하세요.
2. 놓기: Choose a stable, level surface away from direct sunlight, heat sources, and drafts. Ensure the surface can support the weight of the filled aquarium (approximately 12.03 lbs empty, plus water and decorations).
3. 헹굼: Rinse the tank, filter components, and any decorations thoroughly with clean water. 비누나 세제를 사용하지 마십시오.
4. Substrate and Decorations: Add your chosen substrate (gravel, sand) and decorations to the tank.
5. 필터 어셈블리: The 3-in-1 filter system is largely pre-assembled. Ensure the sponge filter box is correctly seated and the hidden water pump is securely in place. The black cable connects to the light, and the white cable connects to the pump.
6. 물 충전: Slowly fill the tank with dechlorinated water, leaving about 1 inch of space from the top.
7. 온도 프로브: Ensure the temperature probe is submerged in the water. The LCD display on the lid will show the current water temperature.
8. 전원 연결: Connect the power adapter to the aquarium and then plug it into a suitable electrical outlet.
9. 초기 필터 작업: Press the water pump switch to start the filtration and oxygenation.
10. 조명: Press the light switch to turn on the LED lights. Adjust colors and modes as desired (see Operating Instructions).

Image: Detailed diagram illustrating the 3-in-1 filter system components, including the sponge filter box, hidden water pump, adjustable air valve, and air outlet for aeration.

Image: Close-up of the aquarium lid showing the digital temperature display, temperature probe, and control buttons for the water pump, light, and aroma functions.

작동 지침

LED 조명 시스템

• 전원 켜기/끄기: Short press the light switch button to cycle through colors. Long press to turn off the light.
• 색상 조정: The system offers 7 single-color options (White, Green, Red, Purple, Agate Green, Blue, Yellow) and 3 cycling modes (Slow Fade, Quick Switch, Static Mode). Short press the light switch to change colors and modes.

3-in-1 Filter System

• 활성화: Press the water pump switch button to activate the filtration, oxygenation, and water circulation.
• 온도 단위 전환: To toggle between Fahrenheit (°F) and Celsius (°C) on the temperature display, press the water pump button 4 times within 10 seconds of powering on the unit.

온도 표시

The integrated LCD display shows the current water temperature. This feature is for monitoring only and does not heat the water. An external heater may be required depending on your fish species and ambient room temperature.

피딩홀

Use the convenient feeding hole on the lid to feed your fish without removing the entire cover.

아로마테라피 기능

The lid includes a space for an aroma disk holder. You can add your preferred fragrance blocks (not included) to enhance the ambiance of your space. Press the aroma switch to activate this feature.

USB 출력 포트

A USB port is integrated into the lid for output, allowing you to charge small devices or power other USB accessories.

Image: Visual representation of the 7 adjustable light colors and 3 lighting cycle modes available on the AQQA aquarium, with instructions for short and long presses of the light button.

이미지: 네 가지 상세 정보 views highlighting key features: the aroma disk holder, the feeding hole, the USB output port, and the black and white cable connections for the light and pump.

유지

정기 청소

• 여과 매체 : Periodically rinse the sponge filter media with old aquarium water (from a water change) to remove accumulated debris. Replace filter media as needed, typically every 2-4 weeks, to maintain optimal filtration.
• Tank Walls: Use an aquarium-safe scraper or magnet cleaner to remove algae from the glass walls.
• Lid and Components: Wipe down the lid and external components with a damp cloth. Ensure no water enters electrical connections.

물 교체

Regular water changes are crucial for maintaining water quality. The AQQA aquarium features an easy water change system:

1. Connect the provided water change hose to the designated port on the pump.
2. 호스의 다른 쪽 끝을 양동이 또는 배수구에 꽂으세요.
3. Activate the pump by pressing the water pump switch. The pump will draw water out of the tank.
4. Once the desired amount of water is removed (typically 25-50% weekly), turn off the pump.
5. Refill the tank with dechlorinated water of a similar temperature.

Image: Three-step visual guide demonstrating how to perform an automatic water change using the integrated pump and hose, showing the hose connection and water being drained into a bucket.

Troubleshooting and Important Considerations

• Fish Getting Stuck in Filter: Some users have reported small fish, particularly Betta fish or shrimp, getting stuck in the filter box. It is recommended to add a fine mesh or sponge over the filter intake slots to prevent this, especially for smaller or slow-moving species.
• Filter Flow Too Strong: If the water flow from the filter is too strong for your fish, consider adding decorations or plants to break up the current, or explore methods to baffle the outflow.
• Betta Fish Suitability: The highly reflective glass of this tank may cause stress to Betta fish, as they may perceive their reflection as another male Betta. Additionally, the filter flow might be too strong for their long fins. Consider these factors when choosing fish species.
• Excessive Bubbles from Filter: If the filter produces too many bubbles, ensure all components are correctly assembled and the water level is adequate. Disassemble and clean the pump and air outlet if necessary.
• Filter Motor Malfunction: If the filter motor stops working, first check the power connection. If the issue persists, the motor may require replacement.
• 온도 표시가 부정확함: Ensure the temperature probe is fully submerged in the water. The display monitors temperature but does not heat the water; an external heater is necessary for temperature control.

Image: Guide to suggested fish species based on size and recommended quantity for the 3.7-gallon tank, along with the physical dimensions of the aquarium.

명세서

보증 및 지원

For specific warranty information and customer support, please refer to the documentation included with your purchase or contact AQQA customer service directly. Keep your proof of purchase for warranty claims.

제조업체의 연락처 정보는 종종 다음과 같습니다. web제품을 구매한 소매업체나 사이트를 통해서도 구매 가능합니다.