Dough Spectrum Black 32 4K 240Hz Dual-Mode WOLED Monitor

소개

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Dough Spectrum Black 32 4K 240Hz Dual-Mode WOLED Monitor. This monitor is designed to deliver high-performance visual experiences with its advanced display technology and robust construction.

그림 1: 전면 view of the Dough Spectrum Black 32 Monitor.

설정

패키지 내용

• Dough Spectrum Black 32 Monitor
• 전원 케이블
• HDMI 케이블(지역/번들에 따라 다를 수 있음)
• DisplayPort Cable (may vary by region/bundle)
• USB-C Cable (for fully equipped model)
• Optional: Monitor Stand (sold separately)

집회

The Dough Spectrum Black 32 Monitor is designed for flexible installation. You can either attach the optional monitor stand or use a VESA-compatible mount (not included).

1. Attaching the Stand (if applicable):

   Carefully place the monitor face down on a soft, clean surface to prevent scratches. Align the stand arm with the mounting slot on the back of the monitor. Secure the stand using the provided screws (if any) or by clicking it into place until it locks securely. Ensure all connections are firm.

   

   그림 2: 후면 view 모니터의 스탠드 부착 부분을 보여주는 사진입니다.

2. VESA Mounting (optional):

   If using a VESA mount, ensure the stand is detached. Follow the instructions provided with your VESA mounting kit to attach the monitor securely. The monitor supports standard VESA mounting patterns.

장치에 연결

The monitor offers various input ports for connectivity. Connect your computer or other video source to the monitor using the appropriate cables.

• 표준 모델: Features two HDMI 2.1 ports and one DisplayPort 1.4 input. A USB-C service port is available for firmware updates.
• Fully Equipped Model: In addition to the standard ports, this model includes a full docking solution with a USB hub, an RJ45 Ethernet port, and a USB-C video input with 100W power delivery.

그림 3: 후면 view of the monitor displaying the input/output ports.

Ensure all cables are securely connected to both the monitor and your source device. Connect the power cable to the monitor and then to a power outlet.

모니터 작동

전원 켜기/끄기

The power button is located on the bottom of the monitor. Press it to turn the monitor on or off. It features a built-in indicator light to show the monitor's status.

Figure 4: Close-up of the power button and joystick on the bottom of the monitor.

화면 디스플레이(OSD) 탐색

The monitor's settings are managed through the On-Screen Display (OSD), accessed via a 5-way joystick located on the bottom of the monitor. A programmable shortcut button is also available.

• OSD에 접근하기: Click the center of the joystick to open the OSD menu.
• 항해: Use the joystick to navigate through menu options.
• 빠른 조치: The joystick directions can be programmed for quick access to specific functions. By default:
  • 왼쪽: Enables/adjusts the frame rate counter.
  • 오른쪽: Enables/customizes the crosshair.
  • 위로: Cycles through Black Equalizer settings.
  • 아래에: Cycles through video inputs.

주요 OSD 설정

The OSD is organized into several tabs for easy navigation:

• 입력/출력: Select video input source, secondary input source, dual-screen mode, audio source, and adjust volume.
• 노름: Configure settings relevant to gaming performance.
• 그림: Adjust color preset, color space (e.g., Display P3), brightness, brightness control (Standard, Tempered, Uniform), contrast, sharpness, color temperature, white point gain, gamma, and reduce color fringing.
• 성능:
  • 적응형 동기화: Enable or disable for variable refresh rate.
  • 깜박임 방지: Adjust frequency range to reduce flicker (Low, High).
  • 듀얼 모드: Switch between High Resolution Mode (4K 240Hz) and High Speed Mode (FHD 480Hz).
  • Black frame insertion: Enable for improved motion clarity at the cost of brightness.
  • Minimum strobe frequency: Set lower limit for black frame insertion.
  • 저지연 모드: Optimize for minimal input lag.
  • Faster start-up: Adjust monitor's power-on behavior.
• 사전 설정 : Load or save user presets, or restore factory defaults.
• OSD : Customize OSD language, position, rotation, transparency, and timeout. Configure quick actions for joystick directions and the custom button.
• 표시등: Adjust behavior (On, Off, Steady, Slow pulse, Fast pulse, Slow blink, Fast blink) and brightness of the power indicator light.
• 유지: Access burn-in prevention features such as Screen Shift, Screen Saver, Logo Extraction Algorithm, Menu Bar Detection, Local Brightness Control, Convex Power Control, TCE, Temporal Peak Luminance Control, Temporal Target Curve, and Uniformity Recovery. Also includes options for Energy Saving Mode, Transistor Wear Compensation, OLED Wear Compensation, and initiating firmware updates.
• 정보: View monitor model, serial number, firmware version, and total usage time.

듀얼 모드 작동

The Dough Spectrum Black 32 offers two primary operational modes:

• 고해상도 모드: Delivers 4K (3840x2160) resolution at a 240Hz refresh rate.
• 고속 모드: Provides Full HD (1920x1080) resolution at an accelerated 480Hz refresh rate, suitable for competitive gaming where maximum frame rates are critical. This mode also supports multiple emulated screen sizes.

Display Coating: Gorilla Glass vs. Matte

The monitor is available with two display coating options:

• Matte Coating: A standard anti-glare finish found on many monitors.
• Gorilla Glass Coating: Developed in partnership with Corning, this option enhances black levels, sharp detail, and vibrant colors by reducing reflections more effectively than traditional matte coatings, unleashing the full potential of the OLED panel.

Figure 5: Visual comparison illustrating the differences between Matte, Glossy, and Gorilla Glass display coatings.

유지

모니터 청소

모니터 화면을 청소하려면 부드럽고 보풀이 없는 천으로 부드럽게 닦으세요. 잘 지워지지 않는 얼룩은 가볍게 닦아주세요.amp물이나 화면에 안전한 세척액을 천에 적셔 사용하세요. 강한 화학 약품이나 연마성 재질은 사용하지 마세요.

OLED Image Retention Prevention

The Dough Spectrum Black 32 incorporates several features to mitigate image retention (burn-in) and prolong the lifespan of the OLED panel:

• 화면 이동: Automatically shifts the image slightly to prevent static elements from causing retention.
• 화면 보호기: 일정 시간 동안 활동이 없으면 화면 보호기가 활성화됩니다.
• Logo Extraction Algorithm: Detects and reduces the impact of static logos.
• Menu Bar Detection: Adjusts display behavior for static menu bars.
• Local Brightness Control: Manages brightness in specific areas to prevent overexposure.
• Convex Power Control: Optimizes power distribution across the panel.
• TCE (Temporal Contrast Enhancement): Enhances contrast dynamically.
• Temporal Peak Luminance Control: Manages peak brightness over time.
• Temporal Target Curve: Adjusts display characteristics to maintain panel health.
• Uniformity Recovery: Helps maintain display uniformity over time.
• OLED Wear Compensation: Algorithms designed to counteract OLED aging.

Additionally, the monitor features an aluminum housing that aids in dissipating heat from the panel, further contributing to its longevity.

펌웨어 업데이트

Firmware updates can be performed via the USB-C service port. This process typically involves using a USB storage device. Refer to the official Dough web최신 펌웨어 및 자세한 업데이트 지침은 해당 사이트를 참조하십시오.

문제 해결

If you encounter issues with your Dough Spectrum Black 32 Monitor, refer to the following common troubleshooting steps:

• 전원 없음:
  • 전원 케이블이 모니터와 전원 콘센트에 단단히 연결되어 있는지 확인하세요.
  • 전원 콘센트가 작동하는지 확인하세요.
  • 전원 버튼을 꼭 누르세요.
• 신호 없음 / 빈 화면:
  • Check that the video cables (HDMI, DisplayPort, USB-C) are securely connected to both the monitor and your source device.
  • Select the correct input source via the OSD menu (Input/Output tab).
  • Ensure your source device (computer, console) is powered on and outputting a signal.
  • 가능하다면 다른 비디오 케이블이나 포트를 사용해 보세요.
• Image Quality Issues (e.g., flickering, incorrect colors):
  • Adjust brightness, contrast, and color temperature settings in the OSD (Picture tab).
  • Enable or adjust Anti-flicker mode in the OSD (Performance tab).
  • 그래픽 카드 드라이버가 최신인지 확인하세요.
  • If using High Speed Mode, ensure your system can support the higher refresh rate.
• Image Retention / Burn-in Concerns:
  • Utilize the maintenance features in the OSD (Maintenance tab) such as Screen Shift and Screen Saver.
  • Avoid displaying static images for prolonged periods.

For persistent issues, consider performing a factory reset via the OSD (Presets tab) or contacting customer support.

명세서

보증 및 지원

보증 정보

The Dough Spectrum Black 32 Monitor comes with a 2-year warranty that covers image retention (burn-in). For detailed warranty terms and conditions, please refer to the official Dough web사이트를 방문하거나 고객 지원팀에 문의하세요.

고객 지원

For further assistance, technical support, or warranty claims, please visit the official Dough support website or contact their customer service channels. Keep your product model number (ES07EFE) and serial number ready when contacting support.