Lubluelu Robot Vacuum and Mop Combo User Manual

1. 서론

This user manual provides comprehensive instructions for the operation, maintenance, and troubleshooting of your Lubluelu Robot Vacuum and Mop Combo, model SL60. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Figure 1.1: Lubluelu Robot Vacuum and Mop Combo (Model SL60)

2. 상자 안에 무엇이 들어있나요?

상자를 풀 때 모든 구성품이 들어 있는지 확인하세요.

• 1 x SL60W Robot Vacuum
• 1 x 2-in-1 Dustbin and Water Tank
• 1 x 충전대
• 1 x 전원 어댑터
• 걸레 1개
• 걸레 거치대 1개
• 1 x 사용자 설명서
• 4 x 사이드 브러쉬
• 1 x 클리닝 도구

3. 제품 특징

The Lubluelu SL60 Robot Vacuum and Mop Combo is equipped with advanced features designed for efficient and thorough home cleaning.

3.1 Precision Laser Mapping and Navigation

Utilizes LDS9.0 LiDAR mapping technology for highly accurate mapping and efficient route planning. It can store up to 5 maps, allowing for customized cleaning plans across multiple floors.

Figure 3.1: Multi-Floor Mapping Capability

3.2 Powerful Suction and 2-in-1 Cleaning

Features a brush-less motor with 4000Pa suction power and three adjustable modes. The 2-in-1 design allows for simultaneous vacuuming and mopping. The precision micro-control water pump offers 3 levels of water flow (High/Medium/Low) for effective wet cleaning, including Y-shaped mopping to imitate manual cleaning.

Figure 3.2: Efficient Pet Hair and Debris Cleaning

Figure 3.3: Adjustable Water Levels for Mopping

3.3 스마트 앱 및 음성 제어

Control the robot vacuum via the Smart Life APP to monitor cleaning routes, set schedules, adjust suction and water levels, change cleaning modes, and create No-Go Zones. Compatible with Amazon Alexa and Google Assistant for voice commands (2.4GHz Wi-Fi network required).

Figure 3.4: App and Voice Control Interface

3.4 Customized Cleaning and No-Go Zones

Offers various cleaning modes including automatic, edge, zone, spot, double, and scheduled cleaning. Users can define up to 10 No-Go Zones to restrict access to specific areas like carpets or children's play areas.

Figure 3.5: Setting Up No-Go Zones

3.5 Continuous Cleaning and Self-Charging

When the battery level drops to 15% or below, the robot automatically returns to its charging base. Once charged to 80%, it resumes cleaning from where it left off, ensuring complete coverage without interruption.

Figure 3.6: Breakpoint Continuous Cleaning

3.6 Obstacle Clearance and Sensors

Equipped with 22 sensors and upgraded AI recognition technology for accurate obstacle avoidance and anti-collision performance. It can easily cross obstacles up to 18mm (0.71 inches) and features anti-fall sensors to prevent falls from stairs or edges.

Figure 3.7: Anti-Drop and Anti-Collision Features

3.7 Boost IQ Technology and Low Noise Operation

Automatically increases suction power when detecting carpet for deeper cleaning. Operates at a low noise level of 55dB, minimizing disturbance during cleaning cycles.

Figure 3.8: Boost IQ Technology for Carpet Cleaning

Figure 3.9: Low Noise Operation (55dB)

4. 설정 가이드

4.1 포장 풀기 및 배치

1. 로봇 청소기와 모든 액세서리를 포장에서 조심스럽게 꺼내세요.
2. Choose a suitable location for the charging base. Ensure it is against a wall, with at least 0.5 meters (1.6 feet) of clear space on either side and 1.5 meters (4.9 feet) in front.
3. 전원 어댑터를 충전 거치대에 연결한 다음 벽면 콘센트에 꽂으세요. 충전 거치대의 표시등이 켜지는지 확인하세요.

4.2 초기 충전

Place the robot vacuum onto the charging base, ensuring the charging contacts align. The robot will begin charging automatically. For first-time use, fully charge the robot before operation (approximately 4-5 hours).

4.3 App Connection (Smart Life APP)

1. 모바일 기기의 앱 스토어(iOS 또는 Android)에서 "Smart Life" 앱을 다운로드하세요.
2. Smart Life 계정에 등록하거나 로그인하세요.
3. Ensure your mobile device is connected to a 2.4GHz Wi-Fi network. The robot vacuum only supports 2.4GHz Wi-Fi.
4. Follow the in-app instructions to add your Lubluelu SL60 robot vacuum. This typically involves resetting the robot's Wi-Fi (refer to the robot's specific button combination for Wi-Fi reset, usually holding down the power button and home button simultaneously until a voice prompt is heard).
5. Once connected, you can name your robot and access all smart features.

5. 사용 설명서

5.1 청소 주기 시작

• 로봇 버튼을 통해: Press the power button on the robot to start an automatic cleaning cycle. Press again to pause.
• 스마트 라이프 앱을 통해: Open the app, select your robot, and tap "Start Cleaning". You can choose specific cleaning modes (Auto, Edge, Zone, Spot) and adjust suction power/water levels.
• 음성 제어를 통해: Once integrated with Amazon Alexa or Google Assistant, use voice commands such as "Alexa, ask RoboVac to start cleaning." (Note: Voice commands are generally limited to starting/stopping cleaning).

5.2 물걸레질 기능 사용하기

1. Fill the 2-in-1 dustbin and water tank with clean water.
2. Attach the mop cloth to the mop holder and then slide the mop holder onto the robot.
3. In the Smart Life app, select the desired water flow level (Low, Medium, High) for mopping.
4. Start a cleaning cycle. The robot will perform Y-shaped mopping for thorough wet cleaning.

Figure 5.1: Electronic Water Pump for Controlled Mopping

5.3 Map Management and Customization

After the first cleaning cycle, the robot will generate a map of your home. You can manage and customize this map in the Smart Life app:

• 다중 지도 저장: Save up to 5 different maps for multi-floor homes.
• Room Editing: Divide, merge, or rename rooms on the map.
• 금지 구역: Draw virtual boundaries to prevent the robot from entering specific areas.
• 구역 청소: 지도에서 특정 지역을 선택하여 집중 청소를 진행하세요.
• 정기 청소: Set cleaning schedules for specific rooms or the entire house at designated times.

Figure 5.2: Customized Cleaning Preferences via App

Figure 5.3: Scheduled Cleaning Example

6. 유지관리 및 관리

정기적인 유지관리를 통해 최적의 성능을 보장하고 로봇 진공 청소기의 수명을 연장할 수 있습니다.

6.1 먼지통 및 필터 청소

• 각 청소 주기 후에 쓰레기통을 비우십시오.
• HEPA 필터를 분리하여 먼지를 털어내십시오. HEPA 필터를 물로 씻지 마십시오.
• Rinse the dustbin and pre-filter with water. Ensure they are completely dry before reinserting.

6.2 메인 브러시 및 사이드 브러시

• Remove the main brush and use the provided cleaning tool to cut and remove tangled hair or debris.
• Inspect side brushes for wear or damage. Replace them if necessary (typically every 3-6 months, depending on usage).

6.3 Mop Cloth and Water Tank

• Remove and wash the mop cloth after each mopping session. Air dry completely.
• Empty any remaining water from the water tank after use to prevent mold or odors.

6.4 센서 및 충전 접점

• Wipe the anti-drop sensors, anti-collision sensors, and charging contacts on both the robot and the charging base with a clean, dry cloth regularly.

7. 문제 해결

If you encounter issues with your Lubluelu SL60, refer to the following common problems and solutions:

8. 기술 사양

Note: Product dimensions provided as 32.5"L x 32.5"W x 9.3"H. Please refer to the product packaging for exact measurements.

Figure 8.1: SL60D Features Comparison

9. 보증 및 지원

Lubluelu is committed to providing full life-cycle technical support for its products. If you encounter any issues during the use of your robot vacuum, please contact our professional FAE technical support team.

For assistance, please send us a message detailing the problem you are experiencing. Our team is ready to help resolve any issues you may face.

For more information and support resources, visit the official Lubluelu store: Lubluelu Official Store