1. 소개 및 이상view
The DATOUBOSS 12V 100Ah LiFePO4 Battery is a high-performance, lightweight, and durable energy storage solution. Utilizing advanced Lithium Iron Phosphate (LiFePO4) cell technology, it offers superior cycle life, energy density, and safety compared to traditional lead-acid batteries. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your battery.
Image 1.1: The DATOUBOSS 12V 100Ah LiFePO4 Battery highlighting its intelligent BMS and Class A battery cells, along with protection features like overcharge, overcurrent, high temperature, overdischarge, and short circuit protection.
주요 특징:
- 경량 및 휴대 성 : Weighs only 11kg, approximately 1/3 the weight of comparable lead-acid batteries, facilitating easy transport and installation.
- 높은 에너지 밀도: 1280Wh energy capacity, providing reliable power.
- 긴 수명: Offers 8,000 to 15,000 deep cycles, ensuring over 10 years of service life.
- 통합 BMS: Equipped with a 100A Battery Management System for comprehensive protection and cell balancing.
- 환경 친화적: Free from heavy metals and non-toxic, complying with European RoHS regulations.
- 다양한 응용 프로그램: Ideal for RVs, caravans, boats, electric scooters, golf carts, trolling motors, backup power, and off-grid solar systems.
2. 안전 정보
설치 및 작동 전에 모든 안전 지침을 주의 깊게 읽으십시오. 이 지침을 따르지 않을 경우 감전, 화재 또는 심각한 부상을 입을 수 있습니다.
- 배터리를 다룰 때는 절연 장갑과 보안경을 포함한 적절한 개인 보호 장비(PPE)를 항상 착용하십시오.
- 배터리 단자를 단락시키지 마십시오. 배터리가 심각하게 손상될 수 있으며 화재의 위험이 있습니다.
- Use only chargers specifically designed for LiFePO4 batteries with compatible voltag전자 및 현재 등급.
- 배터리를 분해하거나 구멍을 내거나 개조하지 마십시오. 내부 부품은 사용자가 수리할 수 없습니다.
- Ensure proper ventilation around the battery to prevent heat buildup.
- 배터리를 화염, 열원 및 인화성 물질로부터 멀리하십시오.
- Avoid installing the battery in direct sunlight or in areas with extreme temperatures.
- In case of fire, use a Class D fire extinguisher. Water or foam may be ineffective.
- If the battery is damaged or leaking, do not touch it. Contact customer support immediately.
Image 2.1: Safety icon indicating potential fire hazard, emphasizing the importance of following safety guidelines.
3. 설정 및 설치
Proper setup is crucial for the performance and longevity of your DATOUBOSS LiFePO4 battery.
3.1 풀기 및 검사
- 배터리를 포장에서 조심스럽게 꺼내세요.
- Inspect the battery for any visible damage, such as cracks, dents, or loose terminals. Do not use a damaged battery.
- Verify that all accessories (if any) are included.
3.2 직렬 및 병렬 연결
The DATOUBOSS 12V 100Ah LiFePO4 battery supports expansion up to 4 units in series and 4 units in parallel (4S4P) for increased voltage and capacity. When connecting multiple batteries:
- 모든 배터리의 용량이 동일한지 확인하세요.tage, capacity, and are from the same brand and model.
- Before connecting, fully charge each battery individually to ensure balanced voltage.
- Use appropriate gauge cables and connectors for the expected current.
- 직렬 연결: 한 배터리의 양극 단자를 다른 배터리의 음극 단자에 연결하십시오. 이렇게 하면 전체 전압이 증가합니다.tage while maintaining the same capacity. Maximum 4 batteries in series (e.g., 4 x 12.8V = 51.2V).
- 병렬 연결: Connect positive terminals together and negative terminals together. This increases the total capacity while maintaining the same voltage. Maximum 4 batteries in parallel (e.g., 4 x 100Ah = 400Ah).
- Series-Parallel Connection: Combine both methods to achieve desired voltage and capacity (e.g., 4S4P for 51.2V 400Ah).
- Tighten all terminal connections securely to prevent resistance and overheating.
Image 3.1: Illustration of a typical power supply system showing solar modules connected to an MPPT solar charge controller, which charges a 25.6V 400Ah (4P2S) battery system. The battery system then powers an inverter to supply various household appliances.
3.3 장착
The battery can be installed in any orientation as it contains no liquid. Ensure the mounting location is:
- Clean, dry, and well-ventilated.
- 직사광선, 비, 극한 온도로부터 보호됩니다.
- Strong enough to support the battery's weight.
4. 사용 설명서
Follow these guidelines for optimal operation of your LiFePO4 battery.
4.1 충전 중
- Use a dedicated LiFePO4 battery charger. Do not use chargers designed for lead-acid batteries unless they have a specific LiFePO4 mode.
- 권장 충전량tage: 14.4V - 14.6V.
- Maximum charging current: 50A. Exceeding this can damage the battery.
- Operating temperature for charging: 0°C to 45°C (32°F to 113°F). The BMS will protect the battery if temperatures are outside this range.
4.2 방전
- Rated continuous discharge current: 100A.
- Maximum discharge current: 120A.
- Operating temperature for discharging: -20°C to 60°C (-4°F to 140°F).
- The BMS will automatically cut off power if the battery is over-discharged to protect its lifespan.
Image 4.1: An internal diagram illustrating the Battery Management System (BMS) within the DATOUBOSS LiFePO4 battery, emphasizing its role in ensuring stability, long lifespan, higher energy density, and efficient charging.
5. 유지관리
DATOUBOSS LiFePO4 batteries are largely maintenance-free, but following these simple steps can ensure maximum performance and longevity.
- 정기 검사: Periodically check battery terminals for corrosion or looseness. Clean terminals with a wire brush if necessary and ensure they are securely tightened.
- 청소: Keep the battery surface clean and dry. Use a damp cloth to wipe off dust or dirt. Do not use solvents or abrasive cleaners.
- 저장: For long-term storage (more than 3 months), charge the battery to 50-70% of its capacity. Store in a cool, dry place with temperatures between -10°C and 50°C (14°F to 122°F). Recharge the battery every 3-6 months to prevent self-discharge.
- 깊은 곳에서 사정하지 않도록 하십시오: While the battery supports 100% Depth of Discharge (DoD), frequent deep discharges can slightly reduce overall cycle life.
6. 문제 해결
If you encounter issues with your DATOUBOSS LiFePO4 battery, refer to the following common problems and solutions.
- 배터리가 충전되지 않음:
- Check all cable connections between the charger and the battery. Ensure they are secure.
- Verify that the charger is specifically designed for LiFePO4 batteries and is functioning correctly.
- 충전량을 확인하세요tage and current settings on the charger are appropriate for a 12V 100Ah LiFePO4 battery.
- If the battery temperature is outside the charging range (0°C to 45°C), the BMS may prevent charging. Allow the battery to return to a safe temperature.
- If multiple batteries are in series/parallel, ensure all are balanced. The BMS has an auto-balancing function, but severe imbalance might require individual charging.
- Battery Not Discharging / No Power Output:
- Check all load connections and ensure they are secure.
- Verify that the load is not exceeding the battery's maximum discharge current (120A). The BMS will cut off power if overloaded.
- Check the battery's State of Charge (SoC). If the battery is fully discharged, the BMS will enter protection mode. Recharge the battery.
- Ensure the battery temperature is within the discharge range (-20°C to 60°C).
- Reduced Capacity or Runtime:
- Ensure the battery is being fully charged to its recommended voltage.
- Verify that the load is not drawing more power than expected.
- Check for any parasitic drains on your system when the battery is not in use.
- While LiFePO4 batteries have a long lifespan, capacity can gradually decrease after many thousands of cycles.
If these steps do not resolve the issue, please contact DATOUBOSS customer support for further assistance.
7. 사양
Detailed technical specifications for the DATOUBOSS 12V 100Ah LiFePO4 Battery.
| 사양 | 값 |
|---|---|
| 상표 | 다투보스 |
| 모델 번호 | 12V 100Ah LiFePO4 배터리 |
| 배터리 구성 | 리튬철인산(LiFePO4) |
| 공칭 권tage | 12.8V |
| 정격 용량 | 100아아 |
| 에너지 | 1280Wh |
| 통합 BMS | 100A |
| 최대 연속 충전 전류 | 50A |
| 최대 연속 방전 전류 | 100A |
| 피크 방전 전류 | 120A |
| 사이클 수명 | 8,000 - 15,000 cycles (at 100% DoD) |
| 수명 | 10년 이상 |
| 무게 | 11kg |
| 작동 온도(충전) | 0°C ~ 45°C(32°F ~ 113°F) |
| 작동 온도(방전) | -20°C ~ 60°C (-4°F ~ 140°F) |
| 보관 온도 | -10°C ~ 50°C(14°F ~ 122°F) |
| 직렬/병렬 연결 | Up to 4S4P (Max 51.2V 400Ah) |
Image 7.1: Technical diagram illustrating key dimensions and specifications of the battery.
8. 보증 및 지원
DATOUBOSS is committed to providing high-quality products and excellent customer service.
8.1 보증 정보
Your DATOUBOSS 12V 100Ah LiFePO4 Battery comes with a 5년 보증 from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, neglect, improper installation, unauthorized modifications, or natural disasters.
8.2 고객 지원
For technical assistance, warranty claims, or any questions regarding your DATOUBOSS battery, please contact our customer support team. We offer professional technical support and aim to respond within 24 hours.
- 이메일: [고객 지원 이메일 주소를 여기에 입력하세요]
- 핸드폰: [고객 지원 전화번호를 여기에 입력하세요]
- Web대지: [공식 담당자 삽입] Web사이트 [여기]
Image 8.1: Icons representing DATOUBOSS's commitment to product quality and customer service, including a 10-year lifespan, 5-year guarantee, 24-hour response, and local warehouses.