PGST Wireless Motion Detector Sensor User Manual

1. 서론

The PGST Wireless Motion Detector Sensor (Model PA-92) is an integral component of the PGST Home Security System, designed to enhance the security of your premises by detecting unauthorized movement. This sensor provides reliable motion detection within its specified range and field of view, contributing to a comprehensive and effective security solution. It is essential to note that this motion sensor requires a compatible PGST alarm host for full functionality.

이미지 1: 앞면 view of the PGST Wireless Motion Detector Sensor.

2. 제품 특징

• All-Day Protection: Designed to detect motion within a range of up to 25 feet.
• 넓은 분야 View: Offers a 110-degree field of view to cover a significant area.
• 간편한 설치: Can be installed conveniently using the supplied bracket.
• 호환성: Exclusively compatible with the PGST home security system and requires a PGST alarm host for operation.

3. 패키지 내용

포장을 개봉하실 때 모든 구성품이 있는지, 그리고 양호한 상태인지 확인해 주십시오.

• 1 x PGST Wireless Motion Detector Sensor (Model PA-92)
• 1 x 장착 브래킷
• 1 x Lithium Ion Battery (pre-installed or included separately)
• 장착 나사 및 벽면 플러그
• 사용 설명서 (본 문서)

4. 설정 및 설치

Proper installation is crucial for optimal performance of the motion sensor.

4.1. 위치 선정

• Install the motion sensor in a corner of the room for maximum coverage.
• Position the sensor at least 1.5 meters (approximately 5 feet) off the ground. This height helps ensure effective detection and minimizes false alarms from pets or small objects.
• Avoid placing the sensor directly facing windows, heat sources (e.g., radiators, vents), or areas with direct sunlight, as these can interfere with detection.

4.2. 센서 장착

1. Identify the desired mounting location based on the guidelines above.
2. Use the supplied mounting bracket as a template to mark the screw holes on the wall.
3. Drill pilot holes if necessary, and insert wall plugs if mounting into drywall or masonry.
4. 제공된 나사를 사용하여 장착 브래킷을 벽에 고정합니다.
5. Attach the motion sensor to the mounted bracket, ensuring it clicks securely into place.

4.3. 배터리 설치 (미리 설치되어 있지 않은 경우)

The sensor requires one Lithium Ion battery (included).

1. Open the battery compartment cover, usually located on the back or side of the sensor.
2. Insert the Lithium Ion battery, observing the correct polarity (+ and -).
3. 배터리 덮개를 단단히 닫으세요.

4.4. Pairing with PGST Alarm Host

This motion sensor must be paired with a compatible PGST alarm host. Refer to your PGST alarm host's user manual for specific instructions on how to add new wireless sensors. Generally, this involves putting the alarm host into pairing mode and then triggering the motion sensor to register it with the system.

5. 사용 설명서

Once installed and paired, the motion sensor operates automatically as part of your PGST alarm system.

• 발각: When the alarm system is armed, the motion sensor will detect movement within its 25-foot range and 110-degree field of view.
• 알람 트리거: Upon detecting motion, the sensor will transmit a signal to the PGST alarm host, which will then trigger the alarm according to your system's settings (e.g., sounding a siren, sending notifications).
• 표시등: The sensor may have an indicator light that flashes briefly upon detection or during pairing mode. Refer to your alarm host manual for specific sensor indicator behaviors.

6. 유지관리

Regular maintenance ensures the longevity and reliable operation of your motion sensor.

• 청소: Periodically wipe the sensor's lens and casing with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
• 배터리 교체: The sensor is powered by a Lithium Ion battery. When the battery level is low, your PGST alarm host may indicate a low battery warning for the sensor. Replace the battery promptly to ensure continuous protection. Use only the specified battery type.
• 테스트: Regularly test the motion sensor by arming your system and walking into the sensor's detection area to confirm it triggers the alarm.

7. 문제 해결

If you encounter issues with your motion sensor, refer to the following common problems and solutions.

8. 사양

9. 안전 정보

• Do not attempt to disassemble or modify the sensor. This may void the warranty and cause damage.
• 기기를 물과 과도한 습기로부터 멀리하세요.
• 배터리를 현지 규정에 따라 적절하게 폐기하십시오.
• 이 장치는 실내에서만 사용하세요.

10. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your PGST alarm host or visit the official PGST website. PGST is committed to providing reliable security solutions and customer satisfaction.

Image 2: PGST Brand Logo.