플레어링 155Amp MIG 용접기 사용 설명서

1. 서론

This manual provides comprehensive instructions for the safe and effective operation, setup, maintenance, and troubleshooting of your FLARING 155Amp MIG Welder. This versatile 3-in-1 machine supports Gasless MIG, Stick, and Lift TIG welding, designed for various applications from home projects to professional use.

2. 안전 정보

용접 장비를 작동할 때는 항상 안전을 최우선으로 고려해야 합니다. 안전 지침을 준수하지 않으면 심각한 부상이나 사망에 이를 수 있습니다.

• 용접 헬멧, 장갑, 보호복 등 적절한 개인 보호 장비(PPE)를 착용하십시오.
• 용접 연기를 흡입하지 않도록 적절한 환기를 확보하십시오.
• 가연성 물질을 용접 구역에서 멀리 두세요.
• 유지보수 또는 액세서리 교체를 하기 전에 항상 전원을 차단하십시오.
• Do not operate the welder in wet conditions.
• Consult local safety regulations and standards.

3. 제품 오버view

The FLARING 155Amp MIG Welder (Model FM155-42CA) is a compact and powerful 3-in-1 welding machine. It features a large LED digital display for clear control and easy operation.

Figure 3.1: FLARING 155Amp MIG Welder and included accessories.

3.1가지 주요 기능:

• 3가지 기능을 하나로: Capable of Gasless MIG, Stick (MMA), and Lift TIG welding. (Note: Lift TIG torch sold separately).
• 고성능: Maximum output of 155A, suitable for mild steel up to 4mm (3/20"). Supports 0.8mm, 0.9mm, and 1.0mm flux-cored wire.
• Large LED Digital Display: Provides clear readings for welding mode, current, and voltage, enhancing operational efficiency.
• 휴대성 있는 디자인: Weighs only 12 pounds (5.67 kg) with a convenient handle for easy transport.
• 첨단 기술: Incorporates IGBT inverter technology for stable and smooth arc performance, along with overheat/overload protection and efficient cooling.

Figure 3.2: Illustration of the 3-in-1 multi-function capabilities of the FM-155 welder.

그림 3.3: 클로즈업 view of the large LED digital display, showing welding parameters.

4. 설정

4.1 포장 풀기 및 검사:

Carefully unpack all components and inspect for any shipping damage. Retain original packaging for future transport or storage.

• 1 x MIG155A Welder
• 1 x MIG Welding Torch (3M)
• 1 x 0.8 Flux Cored Wire (0.5kg)
• 1 x Electronic Holder
• 1 x Brush & Hammer
• 1 x 접지 Clamp (2M)
• 4 x Contact tips
• 2 x Gaiser
• 1 x 사용자 매뉴얼(이 문서)

Figure 4.1: All standard accessories included with the FLARING FM155 welder.

4.2 Connecting the Welder:

1. Connect the MIG Welding Torch to the appropriate port on the front panel.
2. Attach the Ground Clamp 공작물이나 용접 테이블에 연결하여 양호한 전기 접촉을 확보하십시오.
3. For Stick welding, connect the Electronic Holder to the positive terminal and the Ground Clamp 음극 단자에.
4. For Lift TIG welding, connect the TIG torch (sold separately) to the appropriate terminal and the Ground Clamp 음극 단자에.

4.3 Installing Flux-Cored Wire (for MIG Gasless):

The welder features a stable and smooth wire feed structure.

1. 전선 공급부를 여세요.
2. Place the 0.5kg flux-cored wire spool onto the spindle.
3. Thread the wire through the wire pressing wheel and into the automatic wire feed mechanism.
4. Ensure the wire feeding wheel is correctly sized for the 0.8mm flux-cored wire. The welder supports 0.030" (0.8mm), 0.035" (0.9mm), and 0.040" (1.0mm) flux core wire sizes.
5. 구획을 닫습니다.

그림 4.2: 내부 view of the wire feed structure, showing the spool and feeding mechanism.

5. 사용 설명서

The FLARING FM155 offers three welding modes: Gasless MIG, Stick (MMA), and Lift TIG. Select the appropriate mode using the controls on the large LED digital panel.

Figure 5.1: Visual representation of the three welding modes: MMA/Stick, Flux Cored Wire (MIG), and Lift TIG.

5.1 Gasless MIG Welding:

This mode is ideal for welding stainless steel, carbon steel, and thicker steel without the need for external shielding gas, using flux-cored wire.

1. Ensure flux-cored wire is correctly installed (refer to Section 4.3).
2. Select "MIG Gasless" mode on the control panel.
3. Adjust current and voltage settings as required for your material thickness. The machine provides clear digital readouts.
4. 일정한 이동 속도와 아크 길이를 유지하면서 용접을 시작하십시오.

5.2 Stick (MMA) Welding:

For stick welding, ensure the electronic holder and ground clamp are connected as described in Section 4.2.

1. Insert the appropriate electrode into the electronic holder.
2. Select "Stick/MMA/ARC" mode on the control panel.
3. Adjust the current (amperage) according to the electrode type and material thickness.
4. Strike an arc and maintain a consistent arc length and travel speed for optimal results.

5.3 Lift TIG Welding:

For Lift TIG welding, an additional Lift TIG torch is required (sold separately). This mode provides precise control for delicate welding tasks.

1. Connect the Lift TIG torch and ensure proper tungsten electrode installation.
2. Select "Lift TIG" mode on the control panel.
3. Adjust current settings.
4. Initiate the arc by gently touching the tungsten to the workpiece and lifting slightly.

5.4 Welding Samp레:

The FLARING FM155 is capable of welding various materials and shapes, including iron blocks, galvanized pipes, round tubes, chairs, stainless steel, and steel frames.

그림 5.2: 예amples of welds performed on different materials and structures, showcasing the versatility of the welder.

6. 유지관리

정기적인 유지관리는 용접기의 수명과 최적의 성능을 보장합니다.

• 청소: Periodically clean the welder's exterior and ventilation openings to prevent dust and debris buildup. Use a dry, soft cloth.
• 연락처 정보: Inspect and replace contact tips regularly, especially for MIG welding, to ensure consistent wire feeding and arc stability.
• 접지 Clamp & Cables: 지면을 확인하세요amp and all cables for damage or loose connections before each use.
• 저장: 용접기를 사용하지 않을 때는 건조하고 깨끗한 곳에 보관하십시오.

Figure 6.1: The welder features internal cooling and protection systems to ensure durability and safe operation.

7. 문제 해결

This section addresses common issues you might encounter with your FLARING 155Amp MIG 용접기.

8. 사양

Detailed technical specifications for the FLARING 155Amp MIG Welder (Model FM155-42CA).

Figure 8.1: Detailed specification label for the FLARING FM-155 welder.

9. 보증 및 지원

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official FLARING web사이트. 구매 증빙 자료로 구매 영수증을 보관하세요.