1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your suptek PC Monitor Arm MD01A. Please read this manual thoroughly before installation and keep it for future reference. This gas spring display arm is designed to support a single LCD monitor, enhancing your workspace ergonomics and efficiency.
Figure 1: suptek PC Monitor Arm MD01A Overview with dimensions and specifications.
2. 제품 특징
- 호환 모니터: This gas spring display arm supports a single LCD monitor. It has a load capacity of 2-9kg and is compatible with monitor sizes ranging from 13 to 32 inches.
- VESA 표준: Supports VESA mounting patterns of 75x75mm and 100x100mm.
- 다중 각도 조정: The gas spring mechanism allows for smooth vertical and horizontal screen adjustments with minimal effort. The multi-axis design enables tilt up 90°, down 90°, swivel left/right 180°, and 360° rotation. This wide range of motion helps reduce eye strain and improve work efficiency.
- 공간 절약: Replaces traditional monitor stands, freeing up significant desk space.
- 케이블 관리 : Integrated cable clips help organize and protect cables, maintaining a tidy workspace.
Figure 2: Optimized workspace with the monitor arm.
3. 설정 지침
3.1 설치 전 확인
Before proceeding with installation, ensure your desk and monitor meet the following requirements:
- 모니터 크기: 13-32 인치
- 모니터 무게: 2-9kg
- VESA 호환성: 75x75mm 또는 100x100mm
- Desk Thickness (for Clamp Mount): 10-70mm
- Desk Hole Diameter (for Grommet Mount): 최소 10mm
Figure 3: Pre-installation compatibility checks.
3.2 장착 방법 선택
The monitor arm offers two installation methods:
- 데스크 Clamp: For desks with an edge, the robust C-clamp securely fastens the monitor, providing maximum stability. Suitable for desks 10-70mm thick.
- 그로밋 마운트: For desks with a pre-drilled hole, this method provides a flush and stable installation. Suitable for desks with a bolt-through hole (minimum hole diameter 10mm).
그림 4: Clamp 및 그로밋 장착 옵션.
3.3 설치 단계
Follow these steps to install your monitor arm:
- Cl을 부착하세요amp/Grommet to the Desk: Securely fasten the chosen mounting base (C-clamp or grommet) to your desk according to the selected method. Ensure it is tightened firmly.
- 팔 부착: Slide the monitor arm onto the pole of the mounting base.
- 모니터 부착: Align your VESA-compatible monitor with the VESA plate on the arm. Secure the monitor using the provided screws.
Figure 5: Monitor arm installation steps.
4. 사용 설명서
4.1 다각도 조절
The monitor arm allows for flexible positioning to achieve optimal view잉 각도:
- 경사: Adjust the screen vertically up to 90° and down to 90°.
- 받침: Rotate the screen horizontally left or right up to 180°.
- 회전: 화면을 360° 회전하여 세로 또는 가로 방향으로 전환하세요.
Figure 6: Multi-angle adjustment options.
4.2 가스 스프링 장력 조정
The gas spring tension must be adjusted to match your monitor's weight for smooth movement and stable positioning. 중요한: To prevent damage to the monitor or mount, always keep the arm in a horizontal position during adjustment. The gas pressure cannot be adjusted without a monitor attached.
- If the arm drops: Turn the internal bolt counter-clockwise (towards '+') to increase the gas spring tension until the arm stays in the desired position.
- If the arm rises or cannot be pushed down: Turn the internal bolt clockwise (towards '-') to decrease the gas spring tension until the arm stays in the desired position.
그림 7: 가스 스프링 장력 조절.
4.3 Height and Length Adjustment
The arm allows for flexible height adjustment from 140mm to 450mm and a maximum extension length of 534mm to suit your ergonomic needs.
Figure 8: Adjusting arm height and length.
5. 유지관리
To ensure the longevity and proper functioning of your suptek PC Monitor Arm, follow these maintenance guidelines:
- 정기 청소: Wipe the arm and base with a soft, damp 먼지와 오염물을 제거할 때는 천을 사용하십시오. 마감재를 손상시킬 수 있는 연마성 세척제나 용제 사용은 피하십시오.
- 연결 확인: 모든 나사와 볼트가 단단히 조여져 있는지 정기적으로 점검하세요. 안정성을 유지하기 위해 필요하면 다시 조이세요.
- 가스 스프링 조정: If you change monitors or notice the arm is not holding its position correctly, re-adjust the gas spring tension as described in Section 4.2.
- 케이블 관리 : Ensure cables are routed properly through the cable clips and are not pinched or under excessive tension.
Figure 9: Cable management routing.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Monitor arm drops or cannot hold position. | 모니터 무게에 비해 가스 스프링 장력이 너무 낮습니다. | Increase gas spring tension by turning the internal bolt counter-clockwise (towards '+'). Refer to Section 4.2. |
| Monitor arm rises or cannot be pushed down. | 모니터 무게에 비해 가스 스프링 장력이 너무 높습니다. | Decrease gas spring tension by turning the internal bolt clockwise (towards '-'). Refer to Section 4.2. |
| Monitor is wobbly or unstable. | Mounting screws or clamp/grommet are not tight enough. | Check and tighten all mounting screws and the desk clamp/grommet. Ensure the monitor is securely attached to the VESA plate. |
| 움직임 범위가 제한됨. | Obstructions or incorrect assembly. | Ensure there are no physical obstructions. Review assembly steps in Section 3.3 to confirm correct installation. |
7. 사양
- 모델: MD01A
- 상표: suptek
- 장착 유형: Tabletop Mount (C-clamp 또는 그로밋)
- 이동 유형: Tilt, Swivel, Rotation, Height Adjustment
- 재료: 합금강
- 색상: 검은색
- 호환 모니터 크기: 13-32 인치
- 하중 용량: 2-9kg(4.4-19.8파운드)
- VESA 호환성: 75x75mm, 100x100mm
- 책상 두께(Cl)amp): 10~70mm(0.39~2.76인치)
- Desk Hole Diameter (Grommet): 최소 10mm(0.39인치)
- 기울기 범위 : +90° ~ -90°
- 회전 범위: ±180°
- 회전: 360°
- 높이 조정 범위: 140~450mm(5.5~17.7인치)
- Maximum Arm Extension: 534mm(21인치)
8. 보증 및 지원
suptek provides a one-year warranty from the date of purchase for this product. In case of any malfunction or defect, please contact us through your Amazon account. To expedite the support process, please include your order number when contacting us.
연락 방법:
- Amazon 계정에 로그인하세요.
- Navigate to 'Account Service'.
- Go to 'Order History'.
- Find your order for the suptek PC Monitor Arm MD01A.
- Click on 'Seller' and then 'Ask a Question'.
We are committed to resolving your issues promptly and sincerely.