소개
This manual provides detailed instructions for the installation, operation, and maintenance of your Gopper 12-inch Ultra Quiet Bathroom Exhaust Fan with 6500K LED Light. Please read this manual thoroughly before beginning any procedures to ensure safe and efficient use of the product.
The Gopper bathroom exhaust fan is designed for ventilating, exhausting, and dehumidifying spaces up to 100 sq. ft. It features a powerful 120 CFM airflow and operates at an ultra-quiet 1.0 Sone noise level. The integrated 6500K LED light provides bright, cool white illumination. This energy-efficient unit is suitable for various residential applications, including bathrooms, laundry rooms, and bedrooms.
Image: The Gopper 120CFM TurboFlow Vent Fan effectively removes air from a modern bathroom setting.
안전 정보
경고: 화재, 감전 또는 부상의 위험을 줄이려면 다음 사항을 준수하세요.
- Read all instructions and safety information before installing or using this fan.
- All electrical work must be performed by a qualified electrician in accordance with all applicable codes and standards.
- Always disconnect power at the service panel before working on or near the fan.
- 솔리드 스테이트 속도 제어 장치와 함께 이 팬을 사용하지 마십시오.
- This product is not intended for use in kitchens or areas where grease or oil may accumulate.
- Do not install the product directly above a shower or bathtub unless it is connected to a GFCI-protected branch circuit.
- 제품이 올바르게 접지되었는지 확인하세요.
- Do not damage hidden electrical wiring or utilities when making ceiling cuts.
- Do not install in a ceiling with less than 3mm gap between the switch and the ceiling.
- 이 제품은 안전 책임자로부터 제품 사용에 관한 감독이나 지시를 받지 않은 경우 신체적, 감각적 또는 정신적 능력이 저하되거나 경험과 지식이 부족한 사람(어린이 포함)이 사용하도록 제작되지 않았습니다. .
- 어린아이가 이 제품을 가지고 놀지 않도록 감독해야 합니다.
Parts & Specifications
포함된 구성 요소:
- Bathroom Exhaust Fan Unit with LED Light
- Aluminum Foil Tube (Duct)
- Clamps (2)
- Air Vent (Draft Stopper)
- 와이어 커넥터
- 장착 나사
- 제품 사용 설명서
Image: Key components of the Gopper Bathroom Exhaust Fan, including the main unit, ducting, and connectors.
제품 사양:
| 특징 | 세부 사항 |
|---|---|
| 상표 | Gopper |
| 모델명 | 조명이 있는 욕실 환풍기 |
| 제품 치수 | 12인치 깊이 x 12인치 너비 x 6.7인치 높이 |
| 패널 크기 | 11.8인치 x 11.8인치(30cm x 30cm) |
| 장착 구멍 크기 | 9.8인치 x 9.8인치(24.8cm x 24.8cm) |
| 덕트 직경 | 4.0인치(10cm) |
| 기류 용량 | 120 CFM(분당 입방 피트) |
| 소음 수준 | 1.0 아들 |
| LED 조명 색온도 | 6500K (Cool White, non-adjustable) |
| LED Light Lumens | 1500 LM |
| 왓tage | 42 와트 |
| 권tage | 110 볼트 |
| 전원 | AC |
| 객실 유형 | Bathroom, Bedroom, Garage, Laundry Room, Living Room |
| 장착 유형 | 천장 마운트 |
| 재료 | 금속, 플라스틱 |
| 에너지 효율성 | Energy Star 인증 |
Image: The fan is suitable for rooms up to 100 square feet, ensuring effective ventilation.
설치
메모: All electrical work should be carried out by a licensed and qualified electrician. Ensure power is disconnected at the circuit breaker before beginning installation.
사전 설치 단계:
- 치수 확인: Confirm that your ceiling opening matches the required mounting hole size of 9.8" x 9.8" (24.8cm x 24.8cm). The panel size is 11.8" x 11.8" (30cm x 30cm).
- 배선 준비: Ensure you have separate wiring for the fan and light if you wish to control them independently. The fan requires a 110V power supply.
- 덕트: Prepare the 4-inch ducting for connection to the fan unit.
Tool-Free Ceiling Installation (3 Steps):
- 스냅: Position the fan unit into the prepared ceiling opening. The unit is designed for a secure fit.
- 잠그다: Secure the fan unit to the ceiling using the provided mounting screws. Ensure it is firmly attached to the wood frame or ceiling joists for stability.
- 끝난: Insert the light panel into the fan housing. The LED power wire needs to be connected to the switch separately or connected in parallel to the fan power.
Image: Visual guide for the simple three-step installation process: Snap the unit into place, Lock it with screws, and then the installation is Done.
배선도:
The fan and light can be controlled separately. The fan motor has its own wiring (black, white, green for ground), and the LED light has separate wiring (blue, brown, green for ground). Connect these to your wall switches as per local electrical codes. Modern wire connectors are provided for ease of installation.
영상: 이 영상은 전반적인 개요를 제공합니다.view of the Gopper Bathroom Exhaust Fan with Light, demonstrating its features and quiet operation.
작동 지침
The Gopper Bathroom Exhaust Fan is designed for straightforward operation. It features a single speed for ventilation and a fixed color temperature LED light.
- 팬 작동 : Activate the fan using the dedicated wall switch. The fan will operate at 120 CFM, effectively removing moisture and odors from the room.
- 가벼운 가동: Activate the 6500K LED light using its dedicated wall switch. The light provides 1500 lumens of bright, cool white illumination. The color temperature is non-adjustable.
- 조용한 성능: The fan operates at a low noise level of 1.0 Sones, ensuring a quiet environment.
Image: The fan's 1.0 Sone operation ensures a quiet environment, barely perceptible to the human ear.
Image: The powerful exhaust quickly removes shower steam, preventing foggy mirrors.
유지
Regular maintenance ensures optimal performance and extends the lifespan of your exhaust fan. Always disconnect power at the circuit breaker before performing any maintenance.
- Cleaning the Grille and Cover: Switch off power at first. Remove the fan cover and grille. Wash them in warm water with a brush and neutral cleaner. Do not use water over 60°C, petrol, benzene, thinner, or any other organic solvent to clean. Do not allow water to enter the motor.
- 선풍기 날개 청소하기: Wipe the fan blades with a soft cloth. Do not rinse them in water.
- 재조립: Once all parts are dry, reassemble the fan cover and grille.
문제 해결
If you experience issues with your Gopper Bathroom Exhaust Fan, consider the following:
- 선풍기가 작동하지 않음: Check the power supply and ensure the circuit breaker is not tripped. Verify all wiring connections are secure.
- 조명이 작동하지 않음: Ensure the light's power wire is correctly connected and the switch is functional.
- 과도한 소음: Check for any obstructions in the fan blades or ducting. Ensure the fan is securely mounted to prevent vibrations.
- 환기 불량: Verify that the ducting is not blocked or kinked. Ensure the fan size is appropriate for your room's square footage (up to 100 sq. ft.).
If problems persist, contact a qualified electrician or the manufacturer's support for assistance.
보증 및 지원
Gopper provides 평생 서비스 for this product. The quality and structure of each bathroom fan meet regional, national, and international industry standards, ensuring reliability and service life. For any inquiries or support needs, please refer to the contact information provided with your purchase or on the Gopper web대지.