1. 서론
Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.
2. 안전 지침
- 전기 안전: 설치는 자격을 갖춘 전기 기술자가 모든 지역 및 국가 전기 규정을 준수하여 수행해야 합니다. 설치, 유지 보수 또는 전구 교체 전에 항상 주 회로 차단기에서 전원을 차단하십시오.
- 야외 사용: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
- 전구 유형: Use only E27 bulbs with the specified wattag이자형. 최대 와트를 초과하지 마십시오tage는 고정장치에 표시되어 있습니다.
- 손질: 제품을 조심스럽게 다루십시오. 떨어뜨리거나 강한 충격을 주지 마십시오.
- 청소: Do not use abrasive cleaners or solvents. Clean with a soft, damp 옷감.
- 열: Allow the bulb to cool completely before attempting to replace it.
3. 패키지 내용
설치를 시작하기 전에 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오.
- 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
- 1x 마운팅 베이스
- 1x Set of Mounting Hardware (screws, anchors)
- 1x 사용자 설명서
Note: E27 bulb is not typically included and must be purchased separately.
4. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 105701 |
| 치수(길이 x 너비 x 높이) | 12.7 x 12.7 x 80cm |
| 무게 | 1.03 킬로그램 |
| 재료 | 스테인리스 스틸, 플라스틱 |
| 전구의 수 | 1 |
| 권tage | 230 볼트 |
| 소켓 타입 | E27 |
| 힘 | 1 Watt (Max. for integrated components; refer to fixture for bulb max wattage) |
| 전원 | 전기 케이블 |
| 필요한 배터리 | 아니요 |
5. 설정 및 설치
중요한: Ensure the main power supply is switched off at the circuit breaker before commencing installation.
- 위치를 선택하십시오 : Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
- 배선 준비: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
- 베이스 장착: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
- 전선을 연결하십시오: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
- 전구 설치: Insert a suitable E27 bulb (not included) into the lamp 홀더. 너무 조이지 마세요.
- 보안 고정 장치: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
- 복원력 : 설치가 완료되고 모든 연결이 안전하게 이루어지면 주 회로 차단기에서 전원을 다시 켜십시오.
Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.
6. 사용 설명서
The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.
- 전원 켜기: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
- 모션 센서: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
- 자동 차단 : After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
- 주야간 센서: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.
Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.
Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.
7. 유지관리
- 청소: 부드러운 천으로 고정 장치를 정기적으로 청소하십시오.amp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
- 전구 교체:
- Ensure the power supply to the fixture is turned off at the circuit breaker.
- 사용한 전구가 완전히 식을 때까지 만지지 마세요.
- Carefully unscrew the top cover or access panel to reach the E27 bulb.
- Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
- Securely reattach the cover or access panel, ensuring a watertight seal.
- 전원을 복구합니다.
- 점검: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 조명이 켜지지 않습니다. | 전원 공급이 없습니다. 전구에 결함이 있습니다. 배선 연결이 느슨합니다. |
회로 차단기를 확인하십시오. 전구를 교체하십시오. Inspect and secure wiring (with power off). |
| 빛은 계속 켜져 있습니다. | Motion sensor faulty or obstructed. 감지 영역 내에서 지속적인 움직임이 관찰됩니다. 센서 설정이 잘못되었습니다. |
Check for obstructions. Ensure no constant movement. Consult sensor manual for settings. |
| 빛은 움직임을 감지하지 못합니다. | 센서가 막혔거나 더럽습니다. Sensor range too low. Ambient light too high (daylight sensor). |
Clean sensor lens. Adjust sensor range (if adjustable). Test at night or in darker conditions. |
| 빛이 깜박입니다. | 느슨한 전구. 호환되지 않는 전구. 전력 공급이 불안정합니다. |
Tighten bulb. Ensure bulb is compatible. Consult electrician for power issues. |
If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.
9. 보증 및 지원
This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.
연락처 정보는 일반적으로 제품 포장이나 제조업체 공식 웹사이트에서 찾을 수 있습니다. web대지.