ECOELER YWT102 4-Hour Countdown Timer Switch User Manual

소개

Thank you for choosing the ECOELER YWT102 4-Hour Countdown Timer Switch. This device is designed to provide convenient and energy-efficient control over your lights, fans, and other household appliances by automatically turning them off after a set period. Please read this manual thoroughly before installation and operation to ensure proper use and safety.

제품 특징

8 Pre-Set Countdown Options: Select from 1 min, 5 mins, 10 mins, 15 mins, 30 mins, 60 mins, 2 hours, or 4 hours.
수동 켜기/끄기 재정의: Easily override any countdown setting for instant control.
에너지 절약: Automatically turns off connected loads, preventing accidental energy waste.
간단한 조작: Features a Countdown mode and a Constant On mode.
LED 표시등: A blue LED light indicates the selected time and makes the switch easy to locate in the dark.
다양한 용도: Suitable for lights, ceiling fans, bathroom fans, and heaters in various rooms like bathrooms, closets, pantries, garages, and laundry rooms.
안전 인증: ETL listed, supporting LED/CFL, Incandescent (800W), Fluorescent (1200VA) light bulbs, and motors (1/2 HP).

ECOELER Countdown Timer Switch with LED indicators and control buttons — Image showing the ECOELER Countdown Timer Switch with its LED indicators for time settings and the manual ON/OFF button. The indicators show 1 min, 5 min, 10 min, 15 min, 30 min, 1H, 2H, and 4H options.

안전 정보

경고: 화재, 감전 또는 사망 사고를 방지하려면 회로 차단기 또는 퓨즈 박스에서 전원을 차단하고 배선 작업 전에 전원이 차단되었는지 확인하십시오.
모든 국가 및 지역 전기 규정에 따라 설치하십시오.
Use only with copper or copper clad wire.
This device requires a neutral wire for operation. If your switch box does not have a neutral wire, this product is not compatible.
Do not exceed the maximum load ratings: 15A, 120V AC, 60Hz. Incandescent: 800W, Fluorescent: 1200VA, LED/CFL: 600W, Motor: 1/2 HP.

설치

안전하고 정확한 설치를 위해 다음 단계를 주의 깊게 따르십시오.

전원 끄기: Locate the circuit breaker or fuse that controls the switch you are replacing and turn it off. Verify that the power is off using a voltag전자 테스터.
이전 스위치 제거: 기존 벽면 플레이트와 스위치를 배전반에서 조심스럽게 제거합니다. 기존 스위치에서 전선을 분리합니다.
전선 식별: 배전반에서 다음 전선들을 확인하십시오:
- Load Wire (Red): Connects to the light or fan.
- Hot Wire (Black): Incoming power from the circuit breaker.
- 중성선(흰색): Required for this timer switch.
- 접지선(녹색/나선형 구리): 안전을 위해서입니다.
Wire the Timer Switch: Use the provided wire nuts to connect the wires from the electrical box to the corresponding wires on the ECOELER timer switch.
- 연결하다 빨간색 타이머에서 전선을 연결하세요 짐 wire from the box.
- 연결하다 검은색 타이머에서 전선을 연결하세요 더운 wire from the box.
- 연결하다 하얀색 타이머에서 전선을 연결하세요 중립적 wire from the box.
- 연결하다 녹색 타이머에서 전선을 연결하세요 지면 wire from the box.
스위치 장착: Carefully push the wired switch into the electrical box. Secure it with the mounting screws.
벽면 플레이트 설치: Attach the included wall plate.
복원력 : 회로 차단기를 다시 켜세요.

Wiring diagram for ECOELER Countdown Timer Switch showing connections for Load, Hot, Ground, and Neutral wires. — Detailed wiring diagram for the timer switch. Note: A neutral wire is required for installation.

작업

The ECOELER YWT102 timer switch offers two primary modes of operation: Countdown Mode and Constant On Mode.

카운트 다운 모드

This mode allows you to set the connected load to turn off automatically after a specified duration.

시간 선택: Press the "Timer Select Button" (up/down arrows) to cycle through the available countdown options: 1 min, 5 mins, 10 mins, 15 mins, 30 mins, 60 mins, 2 hours, or 4 hours. The corresponding LED indicator will light up.
카운트다운 시작: Press the large "Manual ON/OFF" button once. The connected light or fan will turn on, and the countdown will begin. The timer will remember the last selected time for future use.
Cancel Countdown: To turn off the load before the countdown completes, press the "Manual ON/OFF" button again.

Constant On Mode (Manual Override)

This mode keeps the connected load continuously on, bypassing the countdown timer.

Activate Constant On: With the load off, press and hold the "Manual ON/OFF" button for more than 5 seconds. The load will turn on and remain on indefinitely.
Deactivate Constant On: To turn off the load from Constant On mode, press the "Manual ON/OFF" button once.

ECOELER Countdown Timer Switch in a bathroom setting, demonstrating wide applicability. — The timer switch installed in a bathroom, illustrating its use for controlling exhaust fans or lighting.

명세서

특징	사양
모델 번호	YWT102
작동 모드	ON-OFF, Countdown Timer
현재 평가	15 Amps
운영 볼륨tage	120볼트(AC)
왓tage	1800 와트
부하 호환성	Incandescent: 800W, Fluorescent: 1200VA, LED/CFL: 600W, Motor: 1/2 HP
스위치 유형	Push Button, Countdown Timer
장착 유형	벽걸이형
제어 방법	만지다
재료	Copper, Metal, Polycarbonate
품목 치수(L x W x H)	42 x 37 x 120 밀리미터 (1.65 x 1.46 x 4.72 인치)
상한 온도 등급	섭씨 50도
국제 보호 등급	IP40
인증	FCC, cETL
중성선 필요	예

Dimensions of the ECOELER Countdown Timer Switch and included components: wire nuts, timer switch, and free plate. — Physical dimensions of the timer switch and a view 패키지에 포함된 구성 요소 중 일부입니다.

문제 해결

문제	가능한 원인 / 해결책
스위치가 켜지거나 꺼지지 않습니다.	회로 차단기가 트립되었는지 확인하십시오. 모든 전선 연결이 안전한지 확인하십시오. 중성선이 올바르게 연결되었는지 확인하세요. Confirm the load does not exceed the switch's maximum rating.
LED 표시등이 켜지지 않습니다.	스위치의 전원 공급을 확인하세요. Ensure the switch is correctly wired, especially the neutral connection.
타이머가 카운트다운을 시작하지 않거나 조기에 꺼집니다.	Ensure the correct countdown time is selected. Avoid holding the ON/OFF button for too long, which activates Constant On mode.

유지

The ECOELER YWT102 Countdown Timer Switch requires minimal maintenance. To ensure longevity and proper function:

청소: Wipe the switch and wall plate with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
정기 점검: Periodically check for any loose connections or signs of wear. If any issues are found, turn off power at the circuit breaker before inspecting.

보증 및 지원

보증: 본 제품은 구입일로부터 1년 보증이 제공됩니다.

고객 지원: If you have any questions, require assistance, or encounter issues with your ECOELER Countdown Timer Switch, please contact ECOELER ELECTRIC INC customer support.

이메일: SUPPORTS@ECOELER.COM

ECOELER YWT102

소개