Pro-Ject Debut EVO 2 오디오파일 턴테이블 사용 설명서

1. 서론

Welcome to the world of high-fidelity audio with your new Pro-Ject Debut EVO 2 Audiophile Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. Please read it thoroughly before first use.

The Debut EVO 2 features a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge, designed for exceptional sound reproduction.

2. 설정

Proper setup is crucial for the best sound quality and to prevent damage to your turntable and records.

2.1 포장 풀기 및 배치

Carefully remove all components from the packaging. Retain the original packaging for future transport or service. Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and vibrations.

Figure 2.1: Pro-Ject Debut EVO 2 Turntable with dust cover. Ensure the turntable is placed on a stable, level surface.

2.2 플래터 및 벨트 설치

1. Place the main platter onto the spindle.
2. Locate the drive belt. Carefully stretch the belt around the motor pulley and the sub-platter rim.

그림 2.2: 클로즈업 view of the sub-platter and belt drive system. The belt connects the motor pulley to the sub-platter for rotation.

2.3 톤암 및 카트리지 설치

The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps for tonearm setup:

1. 균형추 조정: Gently push the counterweight onto the rear of the tonearm. With the anti-skating weight removed, balance the tonearm so it floats freely and horizontally. Lock the tonearm in its rest.
2. 추적력 설정: Rotate the tracking force scale ring to '0' while holding the counterweight steady. Then, rotate the counterweight (and scale ring) counter-clockwise until the desired tracking force (typically 1.8g for the Pick it MM EVO) is indicated.
3. 안티 스케이팅 조정: Attach the anti-skating weight to the small groove on the anti-skating stub. The recommended setting for the Pick it MM EVO cartridge is the second groove from the tonearm pivot.

Figure 2.3: Detail of the carbon fiber tonearm, showing the counterweight and anti-skating weight. These components are critical for proper cartridge tracking.

Figure 2.4: The pre-mounted Pick it MM EVO cartridge on the tonearm. This cartridge is designed to deliver lively and robust sound.

2.4 연결

Connect the supplied phono cable to the RCA output jacks on the rear of the turntable and to the phono input (or line input via a phono preamplifier) of your amplifier. Ensure the ground wire is connected to the ground terminal on your amp험 노이즈를 최소화하기 위한 증폭기.

Connect the power adapter to the turntable's power input and then to a suitable wall outlet.

Figure 2.5: Rear panel of the turntable with RCA output jacks and ground terminal. Proper connection to an amplifier is essential for audio output.

3. 사용 설명서

This section details the steps for playing records and using the turntable's features.

3.1 전원 켜기 및 속도 선택

Press the power button to turn on the turntable. The Debut EVO 2 features electronic speed selection. Use the speed selector switch (usually located on the plinth) to choose between 33 1/3 RPM, 45 RPM, or 78 RPM (requires a different belt and stylus, sold separately).

3.2 레코드 재생하기

1. 플래터에 레코드를 놓습니다.
2. Select the correct playback speed (33 1/3 or 45 RPM).
3. 큐잉 레버를 사용하여 톤암을 들어 올리십시오.
4. Carefully position the stylus over the lead-in groove of the record.
5. Lower the tonearm gently using the cueing lever. The stylus will descend onto the record and begin playback.

그림 3.1: 상향식 view of the turntable during record playback. The tonearm is positioned over the record.

3.3 재생 중지

1. 큐잉 레버를 사용하여 톤암을 들어 올리십시오.
2. Return the tonearm to its rest and secure it with the tonearm clip.
3. Turn off the turntable by pressing the power button.

4. 유지관리

Regular maintenance ensures the longevity and optimal performance of your turntable.

4.1 턴테이블 청소

• 먼지 커버: 먼지 덮개를 부드러운 천으로 닦으세요.amp 옷감. 연마성 세제를 피하십시오.
• 받침대와 접시: Use a soft, lint-free cloth to wipe the plinth and platter. For stubborn marks, a slightly damp 천을 사용한 후 마른 천을 사용할 수 있습니다.
• 첨필: Use a dedicated stylus cleaning brush or fluid to gently clean the stylus. Always brush from back to front.

4.2 벨트 교체

The drive belt may stretch or degrade over time. If you notice inconsistent speed or reduced performance, the belt may need replacement. Contact Pro-Ject support or an authorized dealer for a replacement belt.

5. 문제 해결

This section addresses common issues you might encounter with your turntable.

6. 사양

Key technical specifications for the Pro-Ject Debut EVO 2 Turntable.

• 모델: EVO 2 데뷔
• 품목 모델 번호: 9120129864978
• 상표: 프로젝트
• 제품 크기: 16.4 x 12.6 x 4.5인치(41.66 x 32.00 x 11.43cm)
• 품목 무게: 13.2파운드(6kg)
• 플래터 재질: Damped Aluminum (1.7kg, anti-magnetic)
• 톤암 : 탄소섬유
• 탄약통: Pick it MM EVO (pre-mounted)
• 속도: 33 1/3, 45 RPM (78 RPM with optional belt/stylus)
• 연결 기술 : Auxiliary (RCA outputs)
• 포함된 구성 요소: Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter.
• 특별 기능: Carbon Fiber Tonearm, Damped Aluminum Platter, High-Quality Cartridge, Electronic Speed Selection, 25-Year Spare Parts Guarantee.

7. 보증 정보

Pro-Ject Audio Systems offers a 25-year spare parts availability guarantee for this turntable, ensuring long-term support for your product. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject web대지.

Protection plans are also available for purchase:

• 2년 보호 계획
• 3년 보호 계획
• Complete Protect(월간 플랜)

8. 지원 및 연락처

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems web지원 리소스 사이트.

또한 방문할 수 있습니다 Pro-Ject Store on Amazon 추가 제품 정보 및 액세서리를 확인하세요.