ASUS NUC 13 Pro Tall Barebone User Manual

1. 서론

This manual provides essential information for setting up, operating, and maintaining your ASUS NUC 13 Pro Tall Barebone mini PC. This device is designed for various computing tasks, offering a compact form factor with robust connectivity and expandability. As a barebone system, it requires the installation of RAM and storage components before use.

이미지 1.1: 앞면 view of the ASUS NUC 13 Pro Tall Barebone. It features two USB 3.2 ports, a 3.5mm headphone/microphone jack, and a power button on the front panel.

2. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• ASUS NUC 13 Pro Tall Barebone Unit (Model: RNUC13ANHI30000UI)
• VESA 마운트 키트
• AC 어댑터
• 전원 코드
• 사용 설명서 (본 문서)

3. Hardware Installation (Barebone System)

The ASUS NUC 13 Pro Tall Barebone requires user-supplied RAM and storage devices. Ensure the system is powered off and disconnected from the power source before performing any hardware installation.

3.1. Installing RAM (DDR4 SO-DIMM)

1. Unscrew the bottom cover of the NUC unit.
2. 마더보드에서 SO-DIMM 슬롯을 찾습니다.
3. Gently insert the DDR4 SO-DIMM module into the slot at a 45-degree angle.
4. Press down until the retention clips snap into place, securing the module.
5. Repeat for the second module if installing dual-channel memory.

3.2. Installing M.2 SSD

1. 마더보드에서 M.2 슬롯을 찾으세요.
2. Remove the screw or standoff from the M.2 slot.
3. M.2 SSD를 슬롯에 비스듬히 삽입합니다.
4. Gently push down the SSD and secure it with the screw or standoff.

3.3. Installing 2.5-inch SATA Drive

The Tall barebone model supports a 2.5-inch SATA drive.

1. Locate the 2.5-inch drive bay and SATA connector inside the chassis.
2. Secure the 2.5-inch drive into the bay using the provided screws.
3. Connect the SATA data and power cables to the drive and the motherboard.

3.4. 유닛 재조립

1. Carefully replace the bottom cover.
2. Secure the bottom cover with the screws removed earlier.

4. 주변기기 연결하기

Connect your display, keyboard, mouse, and other necessary devices.

Image 4.1: Front panel connectivity. Features include two USB 3.2 ports, a 3.5mm headphone/microphone jack, and the power button.

Image 4.2: Rear panel connectivity. Ports include DC-in, two Thunderbolt™ 4 (USB-C), 2.5G RJ45 LAN, two USB 3.2, two USB 2.0, and two HDMI 2.1 ports.

• 표시하다: Connect your monitor(s) to the HDMI 2.1 ports or Thunderbolt™ 4 (USB-C) ports. The NUC supports up to one 8K or quad 4K@60Hz displays.
• USB 장치: 키보드, 마우스 및 기타 USB 장치를 사용 가능한 USB 3.2 또는 USB 2.0 포트에 연결하십시오.
• 회로망: Connect an Ethernet cable to the 2.5G RJ45 LAN port for wired network access, or use the integrated Wi-Fi 6E for wireless connectivity.
• 오디오: Use the 3.5mm headphone/microphone jack on the front panel for audio input/output.
• 힘: Connect the AC adapter to the DC-in port and then to a power outlet.

4.1. VESA 마운트 설치

The included VESA mount allows you to attach the NUC to the back of a compatible monitor or to a wall.

1. 제공된 나사를 사용하여 VESA 브래킷을 모니터 뒷면 또는 원하는 표면에 부착하십시오.
2. Slide the NUC unit onto the VESA bracket until it clicks securely into place.

5. 사용 설명서

5.1. 첫 번째 부팅 및 BIOS 설정

1. After connecting all peripherals and power, press the power button on the front panel.
2. To enter the BIOS/UEFI setup, repeatedly press the 삭제 or F2 시작 시 키.
3. Configure boot order, system time, and other settings as needed. Save changes and exit BIOS.

5.2. 운영체제 설치

The NUC 13 Pro supports Windows 11. You will need a bootable USB drive with your preferred operating system installer.

1. Insert the bootable USB drive into a USB port.
2. Power on the NUC and enter the BIOS/UEFI setup (refer to Section 5.1).
3. Set the boot priority to the USB drive or select it from the boot menu.
4. 화면의 지시에 따라 운영 체제를 설치하십시오.

5.3. 드라이버 설치

운영체제 설치 후 최적의 성능을 위해 필요한 드라이버를 설치하십시오. 드라이버는 일반적으로 ASUS 지원 웹사이트에서 찾을 수 있습니다. web귀하의 특정 모델에 대한 사이트입니다.

• 칩셋 드라이버
• Graphics Drivers (Intel UHD Graphics)
• Network Drivers (LAN, Wi-Fi, Bluetooth)
• Thunderbolt Drivers
• 오디오 드라이버

6. 유지관리

적절한 유지 관리는 NUC의 수명 연장과 최적의 성능을 보장합니다.

6.1. 청소

• 부드럽고 마른 천으로 외부를 정기적으로 청소하세요.
• Use compressed air to clear dust from ventilation grilles and ports. Ensure the system is powered off before cleaning.
• Avoid liquid cleaners directly on the unit.

6.2. 소프트웨어 업데이트

• Keep your operating system updated with the latest security patches and feature improvements.
• 정기적으로 ASUS 지원을 확인하세요 website for updated BIOS and driver versions.

6.3. 환경 고려 사항

• Operate the NUC in a well-ventilated area to prevent overheating.
• 극한의 온도, 습도 또는 직사광선에 장치를 노출시키지 마십시오.

이미지 6.1: 측면 view of the NUC 13 Pro, showing the ventilation grille and Kensington lock slot for physical security.

7. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

7.1. 힘이 없다

• Ensure the AC adapter is securely connected to the NUC and a working power outlet.
• Verify the power cord is properly connected to the AC adapter.
• 다른 장치로 전원 콘센트를 테스트하세요.

7.2. 디스플레이 출력 없음

• Check that the monitor is powered on and the display cable (HDMI or USB-C) is securely connected to both the NUC and the monitor.
• 가능하다면 다른 디스플레이 케이블이나 모니터를 사용해 보세요.
• 모니터에서 올바른 입력 소스가 선택되었는지 확인하세요.
• If multiple displays are connected, try connecting only one.

7.3. System Overheating

• Ensure the NUC is placed in a location with adequate airflow and that ventilation grilles are not obstructed.
• Clean any dust from the ventilation grilles using compressed air.
• Verify that the internal fan is operating correctly.

7.4. 운영체제 관련 문제

• If the OS fails to boot, try accessing the BIOS/UEFI setup to check boot device priority.
• Consider reinstalling the operating system if software corruption is suspected.
• 모든 드라이버가 올바르게 설치되고 업데이트되었는지 확인하십시오.

8. 사양

Key technical specifications for the ASUS NUC 13 Pro Tall Barebone (RNUC13ANHI30000UI).

9. 보증 정보

ASUS products are manufactured to the highest quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official ASUS support web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.

10. 지원

For technical assistance, driver downloads, or further information, please visit the official ASUS support web대지:

www.asus.com/support/

You may also contact ASUS customer service directly through the contact information provided on their support portal.