소개
Thank you for choosing the Narcissus S867-2 Electric Diamond Abrasives Knife Sharpener. This manual provides essential information for the safe and effective use of your new sharpener. Please read all instructions carefully before operation and retain this manual for future reference.
The Narcissus S867-2 is designed for quick and efficient sharpening of various knife types, including stainless steel and ceramic, as well as scissors. It features a dual-stage sharpening system with diamond abrasives for optimal results.
안전 지침
- Always keep hands clear of the sharpening slots during operation.
- 사용하기 전에 연필깎이를 안정적이고 평평한 표면에 놓으십시오.
- 칼날 갈이 도구를 물이나 다른 액체에 담그지 마십시오.
- Unplug the sharpener from the power outlet when not in use or before cleaning.
- 어린이의 손이 닿지 않는 곳에 보관하세요. 이 제품은 장난감이 아닙니다.
- Do not attempt to sharpen blades that are excessively thick or damaged, as this may damage the sharpener or the blade.
- 제공된 전원 어댑터만 사용하세요.
- Avoid applying excessive pressure when sharpening, as this can damage the blade or the sharpener.
제품 구성 요소
The Narcissus S867-2 Electric Knife Sharpener includes the following key components:
- Crude Sharpening Slot: For initial sharpening of dull blades (360# diamond abrasives).
- Fine Sharpening Slot: For polishing and refining the blade edge (600# diamond abrasives).
- Scissors Sharpening Slot: Dedicated slot for sharpening scissors (600# diamond abrasives).
- 전원 스위치: To turn the unit on and off.
- Metal Dust Collection Box: Collects metal shavings during sharpening for easy disposal.
- 미끄럼 방지 발판: For enhanced stability during use.
이미지: 내부 view of the sharpener, highlighting the 360# and 600# diamond abrasive wheels for different sharpening stages and scissors.
설정
- Unpack the Narcissus S867-2 Electric Knife Sharpener and ensure all components are present.
- Place the sharpener on a clean, dry, and stable countertop or table. Ensure the logo faces towards you for correct orientation of the sharpening slots.
- Plug the power adapter into the sharpener's power port, then plug the adapter into a standard 100-240V AC electrical outlet.
Image: The sharpener connected to its power adapter and plugged into an electrical outlet.
작동 지침
Sharpening Knives (Stainless Steel & Ceramic)
- Turn on the sharpener using the power switch. The indicator light will illuminate.
- Stage 1: Crude Sharpening (for dull blades): Insert the knife blade into the 'Crude' slot at an angle, ensuring it stays in close contact with the outer wall of the slot. Pull the knife slowly and steadily from the heel to the tip, applying light, consistent downward pressure. Repeat this 2-5 times, alternating sides if necessary, until the blade feels sharper.
- Stage 2: Fine Polishing (for refining and finishing): Move the knife to the 'Fine' slot. Insert the blade at an angle, maintaining contact with the outer wall. Pull the knife slowly and steadily from heel to tip, applying very light pressure. Repeat this 2-5 times to polish the edge and remove any burrs.
- 날카롭게 갈고 나면, 칼날을 조심스럽게 닦아주세요.amp cloth to remove any metal dust.
Image: Visual guide for the two-stage knife sharpening process, illustrating crude and fine slots.
Image: Step-by-step instructions for knife sharpening, showing proper knife placement and pulling direction.
가위 날카롭게 하기
- 전원 스위치를 사용하여 연필깎이를 켜세요.
- Open the scissors and insert one blade into the dedicated 'Scissors' slot.
- Pull the scissor blade through the slot from the pivot to the tip, applying light, consistent pressure.
- Repeat for the other scissor blade. Sharpen each blade 2-3 times.
- 날카롭게 갈고 난 후, 가위날을 조심스럽게 닦아주세요.amp 옷감.
Image: Instructions for sharpening scissors, showing the correct insertion and pulling motion.
유지
- Cleaning the Dust Collection Box: Regularly empty the metal dust collection box located at the bottom of the sharpener. To do this, unplug the unit, slide out the box, empty the metal shavings, and reinsert it securely.
- 외부 청소: 연필깎이 외부를 부드러운 천으로 닦으세요.amp 천으로 닦아주세요. 연마성 세제를 사용하거나 기기를 물에 담그지 마세요.
- 저장: Store the sharpener in a dry place, away from direct sunlight and moisture, when not in use.
Image: Removing the metal dust collection box for cleaning.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 연필깎이가 켜지지 않습니다. | Not plugged in correctly; Power outlet malfunction; Power switch off. | Ensure the power adapter is securely plugged into both the sharpener and a working electrical outlet. Check the power switch is in the 'ON' position. |
| 칼이 제대로 날카롭게 갈리지 않습니다. | Incorrect sharpening technique; Blade is severely damaged; Abrasive wheels are worn. | Review the 'Operating Instructions' for proper technique. Ensure light, consistent pressure and correct angle. Severely damaged blades may require professional sharpening. If abrasive wheels are worn, contact customer support. |
| 과도한 진동이나 소음. | 기기가 안정적인 표면에 놓여 있지 않습니다. 내부 부품에 문제가 있습니다. | Ensure the sharpener is on a flat, stable surface. Check that the anti-slip foot pads are clean and intact. If the issue persists, discontinue use and contact customer support. |
명세서
- 모델 번호: S867-2
- 재료: Diamond Abrasives
- 제품 크기: 8.2인치 길이 x 2.9인치 너비 x 2.7인치 높이
- 품목 무게: 1.74 파운드
- 모터: 30-watt DC motor
- 권tage: 100-240V (Wide Voltage 디자인)
- 포함된 구성 요소: Knife sharpener, Power Adapter
보증 및 지원
Narcissus is committed to providing exceptional customer service. Your Narcissus S867-2 Electric Knife Sharpener comes with:
- A 12-month free replacement or refund policy 구매일로부터.
- An extended 24개월 애프터 서비스.
Should you encounter any quality issues or require assistance, please contact Narcissus customer support immediately. We recommend reading this instruction manual thoroughly before the first use to ensure proper operation and to maximize the lifespan of your sharpener.