Maxxima Horizontal LED Step Light Instruction Manual

1. 제품 오버view

The Maxxima Horizontal LED Step Light (Model MEW-SW203B-02) is designed to provide efficient and adjustable illumination for indoor and outdoor stairways, pathways, and decks. This fixture features a 3 CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3000K (Warm White), 4000K (Neutral White), and 5000K (Daylight) to suit various lighting preferences and environments. Its durable aluminum construction and IP65 rating ensure suitability for wet, damp, 또는 건조한 지역.

그림 1: 전면 view of the Maxxima Horizontal LED Step Light in black finish.

2. 안전 정보

• 경고: 감전 위험이 있습니다. 설치 또는 정비 전에 퓨즈나 회로 차단기의 전원을 분리하세요.
• 본 제품은 해당 설치 규정에 따라 제품의 구조, 작동 및 관련 위험을 잘 아는 사람이 설치해야 합니다.
• 모든 전기 연결이 안전한지 확인하고 현지 규정과 조례를 준수하세요.
• 젖은 손으로 또는 젖은 바닥에 서 있는 상태에서 이 조명기구를 설치하지 마십시오.amp 표면.
• This fixture is designed for 120VAC operation. Do not connect to any other voltage.
• 설비를 개조하거나 원래 용도 이외의 목적으로 사용하지 마십시오.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• Maxxima Horizontal LED Step Light Unit (2-Pack)
• 장착 하드웨어(나사, 와이어 너트)
• 사용 설명서(본 문서)

그림 2: 폭발 view showing the step light components, including the faceplate and internal module.

4. 사양

5. 설치 지침

시작하기 전에: Ensure power is turned OFF at the circuit breaker or fuse box to avoid electrical shock. If you are unsure about electrical wiring, consult a qualified electrician.

1. 접속함을 준비하세요: Ensure you have a standard one-gang junction box installed in the desired location.
2. 배선 연결:
   • 연결하다 검은색 고정물에서 전선까지 더운 (black) wire from the junction box.
   • 연결하다 하얀색 고정물에서 전선까지 중립적 (white) wire from the junction box.
   • 연결하다 녹색 고정물에서 전선까지 지면 (green or bare copper) wire from the junction box.
   Secure all connections with the provided wire nuts.
3. 색온도(CCT)를 선택하세요: Before mounting, locate the CCT selection switch on the back of the light module. Slide the switch to your desired color temperature: 3000K (Warm White), 4000K (Neutral White), or 5000K (Daylight).

   Figure 3: Back of the light module with CCT selection switch (3000K/4000K/5000K).
4. Mount the Light Module: Carefully tuck the wires into the junction box. Align the light module with the junction box and secure it using the provided mounting screws.
5. Attach the Faceplate: Once the module is securely mounted, snap or screw the decorative faceplate onto the light module.
6. 복원력 : Turn the power back ON at the circuit breaker or fuse box. Test the light to ensure proper operation.

Figure 4: Maxxima LED Step Light installed on a staircase wall.

설치 비디오 가이드

Video 1: This video demonstrates the components of the Maxxima Horizontal LED Step Light, how to select the color temperature (3000K, 4000K, 5000K) using the switch, and the final appearance of the light installed.

6. 사용 설명서

The Maxxima Horizontal LED Step Light operates by simply turning on the power at the wall switch connected to the fixture. The chosen color temperature (3000K, 4000K, or 5000K) will illuminate once power is supplied. The CCT setting is selected during installation and remains constant until manually changed.

Figure 5: Close-up of the step light emitting warm white light (3000K).

7. 유지관리

The LED step light requires minimal maintenance. To clean the fixture:

• 청소하기 전에 전원이 꺼져 있는지 확인하십시오.
• 부드러운 천으로 외부 표면을 닦으세요.amp 옷감.
• Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Periodically check for any loose connections or damage to the wiring, especially for outdoor installations.

8. 문제 해결

If the LED step light is not functioning correctly, refer to the following common issues and solutions:

• 표시등이 켜지지 않습니다:
  • Check if the power supply is ON at the circuit breaker.
  • Verify that all wire connections are secure and correctly made (hot to hot, neutral to neutral, ground to ground).
  • Ensure the fixture is receiving the correct voltage (120VAC).
• 불빛이 깜빡이거나 어두워집니다.
  • 느슨한 전선 연결을 확인하십시오.
  • Ensure the fixture is not connected to a dimmer switch unless explicitly rated for dimming (this model is not specified as dimmable).
  • 안정적인 전원 공급을 확인하십시오.
• 색온도가 잘못되었습니다:
  • 조명기의 전원을 끕니다.
  • Remove the faceplate and module to access the CCT selection switch.
  • Adjust the switch to the desired setting (3000K, 4000K, or 5000K).
  • Reassemble and restore power.

If issues persist after following these steps, contact Maxxima customer support.

9. 보증 및 지원

This Maxxima Horizontal LED Step Light is covered by a 3년 보증 구매일로부터. 이 보증은 정상적인 사용 하에서 재료 및 제조상의 결함을 포함합니다.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Keep your purchase receipt as proof of purchase.

연락처 정보: Refer to the Maxxima web최신 연락처 정보는 웹사이트 또는 구매 서류를 참조하십시오.