Kohree RV Door Lock (Model KR3414) User Manual

1. 제품 오버view

The Kohree RV Door Lock (Model KR3414) provides secure and convenient keyless entry for your RV, camper, 5th wheel, or trailer. It features multiple unlocking methods including fingerprint recognition, a digital keypad, and traditional mechanical keys. Designed for durability, this lock is constructed from metal and offers IP66 waterproof protection.

주요 특징:

• 다양한 입력 옵션: Unlock using fingerprint, keypad password, or mechanical keys.
• Quick Fingerprint Recognition: Utilizes a Sweden FPC sensor for fast unlocking (under 0.3 seconds). Supports up to 30 unique fingerprints.
• 보안 키패드: Features an anti-peeping virtual password design and a silent, backlit keyboard for nighttime operation.
• 내구성 있는 구조: Made of metal with an IP66 waterproof rating, corrosion-resistant, and rust-proof.
• Enhanced Latch Control: Independently designed gear transmission for precise latch operation.

이미지 1.1: 이상view of the Kohree RV Door Lock's multiple entry methods and durable features.

2. 패키지 내용

설치를 진행하기 전에 패키지에 모든 구성품이 들어 있는지 확인하십시오.

• Kohree RV Door Lock Keyless Entry Fingerprint Keypad (Front and Rear Handles)
• Mechanical Keys (4 included)
• 장착 나사 및 액세서리
• 스트라이크 플레이트
• 사용자 설명서

3. 사양

4. 설치 가이드

Before installation, ensure your RV door opening size is 3.75 인치 x 2.75 인치 x 1.5 인치. This lock is designed to fit these specific dimensions.

Image 4.1: Required door opening dimensions for installation.

설치 단계:

1. 문 준비: Ensure the existing door lock is removed and the door opening matches the required dimensions (3.75" x 2.75" x 1.5").
2. Install Front Handle: Slide the front handle of the RV Door Lock into the door's front opening.
3. Attach Strike Plate: Secure the strike plate to the side of the door frame using the provided screws.
4. 메인 회선을 연결하세요: Connect the main wiring line from the front handle to the rear handle. Ensure the connection is secure.
5. Attach Rear Handle: Position the rear handle over the opening, aligning it with the front handle, and secure it with screws.
6. 배터리 설치: Open the battery compartment on the rear handle. Install four AA batteries, ensuring correct polarity. Close the battery compartment.

5. 설정 및 프로그래밍

5.1 Setting a New Passcode

1. Press and hold the 'Setting' button (located on the back of the interior handle) for 5 seconds until the indicator light turns blue.
2. Enter your desired 6-8 digit password.
3. '잠금' 버튼을 눌러 확인하세요.
4. When the green light turns blue, repeat the new password and press the 'Lock' button again to confirm. A steady green light indicates successful setup.

Image 5.1: The anti-peeping virtual password feature allows adding random digits before or after your actual code for enhanced security.

5.2 Setting a Fingerprint

The lock supports up to 30 unique fingerprints.

1. Long-press the 'Setting' button (located on the back of the interior handle).
2. Enter the first password you set (the default is '123456' if not changed) and press the 'Lock' button.
3. When the blue light is steady, place your finger on the fingerprint sensor. Lift and press your finger 5 times, ensuring different angles for comprehensive registration.
4. A green flash indicates successful registration for each scan. After 5 successful scans, a steady green light confirms completion.

Image 5.2: The fingerprint sensor offers fast and accurate recognition for convenient access.

6. 운영

6.1 문 잠금 해제

• 지문: 등록된 손가락을 센서에 올려놓으세요. 지문이 인식되면 잠금이 해제됩니다.
• 키패드 : Enter your 6-8 digit password on the keypad, then press the 'Lock' button. The lock will unlock.
• 기계식 키: Insert one of the provided mechanical keys into the keyhole and turn to unlock.

6.2 문 잠그기

• 원터치 잠금: Press the 'Lock' button on the keypad. This will lock both the exterior door handle and the latch simultaneously.
• 수동 잠금 : From the inside, use the manual lock lever to secure the door.

7. 잠금 재설정

To reset the RV door lock to its factory default settings (password '123456'):

1. Hold the 'Setting' button (on the back of the interior handle) for 10 seconds until the green light turns red.
2. Press the 'Unlock' key on the keypad.
3. When the green light turns on, the reset is successful. The default password is now '123456'.

8. 유지관리

• 배터리 교체: When the battery indicator is low, replace all four AA batteries promptly to ensure continuous operation.
• 청소: 부드러운 천으로 자물쇠 외부를 닦으세요.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
• 지문 센서 : In wet conditions, ensure your fingers are dry before using the fingerprint sensor for optimal sensitivity and recognition.

9. 문제 해결

• 잠금이 응답하지 않음: Check battery levels. Replace batteries if low. Ensure the main wiring connection between the front and rear handles is secure.
• 지문이 인식되지 않음: Ensure your finger is clean and dry. Try re-registering your fingerprint if issues persist. Ensure proper placement on the sensor.
• 키패드가 작동하지 않습니다. Verify the password entered is correct. If the lock was recently reset, the password might have reverted to the default '123456'.
• 기계식 키가 작동하지 않습니다: Ensure the key is fully inserted and turned correctly. If the electronic system is completely unresponsive, the mechanical key should still function.
• Locking/Unlocking Issues: Check for any obstructions in the door frame or latch mechanism. Ensure the lock is properly aligned and installed.

10. 보증 및 지원

For warranty information, technical support, or any product-related inquiries, please contact Kohree customer service through the retailer where the product was purchased or visit the official Kohree web대지.

보증 청구를 위해 구매 증명서를 보관하십시오.