XPG CORE Reactor II VE 850W Power Supply Unit User Manual

1. 서론

This manual provides essential information for the installation, operation, and maintenance of your XPG CORE Reactor II VE 850W Power Supply Unit (PSU). Please read this manual thoroughly before installation and retain it for future reference. The XPG CORE Reactor II VE is an 80 Plus Gold certified power supply designed for stable and efficient power delivery to your computer system.

Image 1.1: XPG CORE Reactor II VE 850W Power Supply Unit, showcasin컴팩트한 디자인입니다.

2. 주요 특징

• 80 플러스 골드 인증: Ensures high power efficiency, reducing energy waste and operating costs.
• 12V-2x6 Connector: Provides direct and efficient power delivery to critical components, enhancing system stability and performance.
• DC-DC Circuit Design: Maximizes efficiency and reliability by converting power directly to the required output voltage, reducing heat and prolonging hardware lifespan.
• Low Ripple Noise Design: Features ripple levels below 60mV at +12V and below 40mV at +5V and +3.3V, ensuring stable power delivery and minimizing electrical interference.
• >15ms Hold Up Time: Exceeds Intel's standards for uninterrupted power delivery, ensuring reliable operation under challenging conditions.
• 8 Industrial Protections: Comprehensive protection suite including Over-Voltage 보호(OVP), 저용량tage Protection (UVP), Over-Current Protection (OCP), Short-Circuit Protection (SCP), Over-Power Protection (OPP), Over-Temperature Protection (OTP), Surge & Inrush Protection (SIP), and No Load Operation (NLO).
• 컴팩트한 140mm 길이: Maximizes space efficiency for easy integration into various PC setups and chassis.

Image 2.1: Close-up of the 12V-2x6 connector for modern GPUs.

Image 2.2: Visual representation of the 8 industrial-grade protections.

3. 설정 및 설치

Before installing the XPG CORE Reactor II VE PSU, ensure your computer system is powered off and disconnected from the main power outlet. Refer to your PC case and motherboard manuals for specific installation instructions.

3.1 풀기

Carefully remove the PSU and all included cables from the packaging. Verify that all components listed in the product documentation are present.

Image 3.1: XPG CORE Reactor II VE PSU with its modular cables.

3.2 Mounting the PSU

1. Position the PSU in the designated PSU bay of your PC case.
2. 파워서플라이의 나사 구멍과 케이스의 나사 구멍을 맞춰주세요.
3. 제공된 나사를 사용하여 PSU를 고정합니다.

3.3 연결 케이블

The XPG CORE Reactor II VE is a fully modular PSU, allowing you to connect only the cables you need. This helps improve airflow and cable management within your PC case.

Image 3.2: Modular cable connection ports on the XPG CORE Reactor II VE PSU.

• 24핀 ATX 케이블을 마더보드에 연결합니다.
• Connect the 8-pin (4+4) EPS/CPU cable(s) to your motherboard.
• Connect the 6+2 pin PCIe cables to your graphics card(s). The 12V-2x6 connector is specifically designed for modern high-power GPUs.
• Connect SATA power cables to your storage drives (HDDs/SSDs) and other SATA-powered devices.
• Connect Molex cables to any peripherals requiring them.
• 모든 연결이 안전하고 올바르게 장착되었는지 확인하십시오.

4. 사용 설명서

Once the PSU is installed and all components are connected, you can power on your system.

1. Ensure the power switch on the back of the PSU is in the "OFF" (0) position.
2. AC 전원 코드를 전원 공급 장치(PSU)에 연결한 다음 벽면 콘센트 또는 서지 보호기에 연결하십시오.
3. Flip the power switch on the PSU to the "ON" (I) position.
4. 시스템을 시작하려면 컴퓨터 케이스의 전원 버튼을 누르세요.

The XPG CORE Reactor II VE is designed for continuous, stable operation. Its FDB 120mm fan provides efficient cooling while maintaining low noise levels.

5. 유지관리

적절한 유지 관리는 파워서플라이의 수명 연장과 최적의 성능을 보장합니다.

• 먼지 제거: Periodically clean the PSU fan and ventilation grilles to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for this purpose, ensuring the system is powered off and unplugged.
• 케이블 관리 : 케이블이 깔끔하게 정리되어 PC 케이스 내부의 공기 흐름을 방해하지 않도록 하십시오.
• 환경 조건: Operate the PSU in a well-ventilated area, away from direct sunlight, excessive heat, and moisture.

6. 문제 해결

If you encounter issues with your XPG CORE Reactor II VE PSU, refer to the following common troubleshooting steps:

• 전원 없음:
  • 전원 코드가 전원 공급 장치와 벽면 콘센트에 제대로 연결되어 있는지 확인하십시오.
  • Ensure the PSU's power switch is in the "ON" (I) position.
  • Verify that the 24-pin ATX and 8-pin EPS/CPU cables are correctly seated in the motherboard.
  • 다른 장치로 벽면 콘센트를 테스트하여 전원이 들어오는지 확인하세요.
• 시스템 불안정/충돌:
  • Ensure all power connectors to components (motherboard, CPU, GPU, drives) are firmly connected.
  • Check for any loose cables or short circuits within the case.
  • 가능하다면 다른 부품 세트를 사용하거나 다른 시스템에서 파워서플라이를 테스트하여 문제의 원인을 파악하십시오.
• 과도한 소음:
  • Check if the PSU fan is obstructed by dust or cables.
  • Ensure the PSU is securely mounted to prevent vibrations.
  • If the noise persists and is unusual, contact customer support.

문제 해결 단계를 시도해도 문제가 해결되지 않으면 XPG 고객 지원팀에 문의하여 추가 지원을 받으십시오.

7. 사양

8. 보증 및 지원

The XPG CORE Reactor II VE 850W PSU comes with a 7년 제조사 보증. For warranty claims or technical support, please visit the official XPG web사이트 또는 고객 서비스 부서에 문의하십시오.

추가 리소스 및 제품 정보는 다음을 방문하세요. 아마존에서 XPG 스토어를 만나보세요.

9. 제품 비디오

Below are relevant product videos for the XPG CORE Reactor II VE Power Supply Unit. These videos provide additional visual information regarding the product's features and installation.