BOTSLAB G980H 4K 블랙박스 (하드와이어 키트 포함) 사용 설명서

1. 서론

Thank you for choosing the BOTSLAB G980H 4K Dash Cam with Hardwire Kit. This manual provides detailed instructions for the installation, operation, and maintenance of your new dash camera system. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

2. 제품 오버view

The BOTSLAB G980H is a high-performance dash camera system designed to capture clear video footage of your journeys. The front camera records in true 4K resolution, while the rear camera records in 1080P (optimized to approximately 2K via BOTSLAB algorithm). Both cameras utilize the Sony IMX 415 sensor, providing clear video capture, including in low-light conditions. The system includes advanced features such as 24/7 parking mode, ADAS (Advanced Driver-Assistance Systems), and built-in GPS for reliable recording and enhanced driving safety.

Image: The main components of the BOTSLAB G980H Dash Cam system, including the front camera, rear camera, and hardwire kit.

3. 상자 안에 무엇이 들어있나요?

상자를 뜯을 때 다음 품목이 모두 포함되어 있는지 확인하세요.

• BOTSLAB G980H Dash Cam (Front Unit)
• 후방 카메라
• 하드 와이어 키트
• ADAS (Advanced Driver-Assistance Systems) functionality
• Micro USB cable (integrated with hardwire kit)
• 사용자 설명서

이미지: 제품 포장에 포함된 품목의 시각적 표현입니다.

4. 설정 및 설치

Proper installation is crucial for optimal performance. The G980H dash cam is designed for windshield mounting.

4.1 하드와이어 키트 설치

The included hardwire kit enables 24/7 parking mode functionality. It requires connection to your vehicle's fuse box.

1. Step 1: Test Power Sources
   Use a multimeter to check for a 12V constant power source and an ACC (Accessory) power source in your car's fuse box.


Image: A multimeter being used to test fuse box connections for constant and ACC power.

2. Step 2: Set Up the Wires
   Connect the Yellow Wire (ACC) to the accessory power, the Red Wire (VCC+) to the constant power, and the Black Wire (GND-) to a grounding point on the vehicle chassis.


이미지: 클로즈업 view of the hardwire kit's yellow, red, and black wires connected to the car's fuse box and ground.

3. Step 3: Connect the Dash Cam
   Attach the micro USB port of the hardwire kit to your BOTSLAB G980H dash cam. Ensure the cable is routed neatly and securely.


Image: The micro USB connector of the hardwire kit ready to be plugged into the dash cam.

Image: A diagram showing the micro USB port, power conversion box, and the three wires (ACC, VCC+, GND-) of the hardwire kit.

Image: The 9ft long hardwire cable, designed for compatibility with various car models.

4.2 대시캠 장착

전면 블랙박스는 앞 유리, 가급적 뒷 유리 뒤쪽에 장착하세요.view mirror, to ensure it does not obstruct your view. Position the rear camera on the rear window for optimal coverage.

4.3 메모리 카드 삽입

Insert a high-quality U3 or V30 rated microSD card (not included) into the designated slot on the dash cam. Ensure it is inserted correctly until it clicks into place. The dash cam requires a memory card for recording footage.

5. 사용 설명서

5.1 기본 작업

• 전원 켜기/끄기: The dash cam will automatically power on and begin recording when your vehicle starts, and power off when the engine is turned off (if connected via ACC power).
• 루프 녹음: The G980H features seamless loop recording, continuously overwriting the oldest footage 메모리 카드가 가득 찬 경우.
• G-센서: In the event of a sudden impact or collision, the built-in G-Sensor will automatically lock the current video segment to prevent it from being overwritten.
• 비디오 품질: The front camera records in 4K resolution, providing a wide 170-degree view 앞으로의 길에 대하여.

Image: Illustration of the dash cam's 4K resolution and 170-degree wide-angle recording capability.

5.2 ADAS Features (Advanced Driver-Assistance Systems)

The G980H is equipped with a 1.5TOPS AI NPU chip and BOTSLAB's AI algorithm to provide real-time driving alerts:

• 보행자 충돌 경고: Alerts you to potential collisions with pedestrians.
• Front Vehicle Starts Moving: Notifies you when the vehicle ahead begins to move, useful in traffic.
• 차선 이탈 경고: Alerts if you unintentionally drift out of your lane.
• Headway Monitoring Warning: Helps maintain a safe distance from the vehicle in front.
• Driver Fatigue Alerts: Provides alerts every 2 hours to encourage breaks and prevent fatigue.

Image: Visual representation of the various ADAS warnings provided by the dash cam, along with illustrations of the AI NPU chip and built-in GPS.

5.3 24시간 주차 모드

With the hardwire kit installed, the G980H can monitor your vehicle even when it's turned off, providing protection against theft and vandalism.

• The dash cam will automatically switch to parking mode when the vehicle is parked.
• It will record emergencies and suspicious activities around your car.

Image: The dash cam display showing options for Time-Lapse Recording (Parking Mode) and Normal Recording (Driving Mode), illustrating its 24-hour monitoring capability.

5.4 GPS Integration

The built-in GPS module integrates with Google Maps, allowing you to track your driving path. The dash cam's display will show your real-time speed, and recorded videos will include speed records.

Image: The dash cam screen showing real-time speed and GPS data, with a map overlay indicating the driving path.

6. 유지관리

• 청소: 카메라 렌즈와 화면은 부드럽고 마른 천으로 닦으십시오. 연마성 세척제나 용제는 사용하지 마십시오.
• 메모리 카드: Regularly format the memory card (at least once a month) to ensure optimal performance and prevent data corruption. Use a high-quality U3 or V30 rated microSD card.
• 펌웨어 업데이트: Check the BOTSLAB official web블랙박스에 최신 기능과 버그 수정 사항이 적용되도록 정기적으로 펌웨어 업데이트를 확인하세요.

7. 문제 해결

8. 사양

9. 보증 및 지원

For warranty information and technical support, please refer to the official BOTSLAB web사이트를 방문하거나 고객 서비스에 직접 문의하세요. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.

제조업체: 봇슬랩

첫 이용 가능 날짜: 25년 2024월 XNUMX일