HITBOX ARC200D MINI 100V 140A Arc Welder Instruction Manual

1. 서론

구매해주셔서 감사합니다asing the HITBOX ARC200D MINI Arc Welder. This manual provides essential information for the safe and efficient operation of your new welding machine. Please read it thoroughly before use and keep it for future reference.

2. 안전 지침

Always prioritize safety when operating welding equipment. Failure to follow safety guidelines can result in serious injury or damage to the equipment.

• 개인 보호 장비(PPE): Always wear appropriate PPE, including a welding helmet, welding gloves, protective clothing, and safety shoes.
• 통풍: 용접 연기를 흡입하지 않도록 작업 공간에 적절한 환기 시설을 확보하십시오.
• 화재 위험: 용접 작업장 근처에 가연성 물질을 두지 마십시오. 소화기를 항상 준비해 두십시오.
• 전기 안전: Ensure the machine is properly grounded. Do not operate in wet conditions. Regularly inspect cables for damage.
• 과열 보호: The machine is equipped with overheat protection. If it overheats, it will automatically shut down. Allow it to cool before resuming operation.
• VRD 기능: 더 볼tag전압저항 감소 장치(VRD)는 개방 회로 전압을 감소시킵니다.tage for increased safety, especially in hazardous environments.

Image: A welder wearing protective gear operating the machine. Always use appropriate safety equipment.

3. 패키지 내용

The HITBOX ARC200D MINI package includes the following items:

• 1 x ARC200D MINI Arc Welding Machine
• 1 x 1.8M Welding Holder Cable
• 1 x 1.2M Earth Cable
• 와이어 브러시 1개
• 5 x Welding Rods
• 1 x Carrying Belt
• 일본어 사용 설명서 1부

Image: The ARC200D MINI welding machine displayed with its complete set of accessories, including cables, welding rods, brush, and carrying belt.

4. 제품 특징

The HITBOX ARC200D MINI is designed for versatility and ease of use, offering:

• 듀얼 용접 모드: Supports both MMA/ARC (Stick) welding and LIFT TIG welding (TIG torch sold separately).
• 100V Household Compatibility: Operates on standard household 100V outlets, making it convenient for home DIY projects.
• 소형 및 경량: With dimensions of 20x8.5x10.5cm and a weight of 2.1kg, it is highly portable and easy to carry with the included belt.
• 조정 가능한 전류: Offers a welding current range up to 140A, suitable for various material thicknesses (0.8mm-5mm).
• LCD 디스플레이: A clear liquid crystal display shows selected mode and current settings for intuitive operation.
• 고급 안전: Features VRD, overcurrent, overheat, and overvoltage protection for user safety and machine longevity.

Image: The HITBOX ARC200D MINI welding machine, highlighting its compact design and user-friendly interface.

Image: Visual representation of the compact size (20x8.5x10.5cm) and light weight (2.1kg) of the ARC200D MINI, with a carrying belt shown.

Image: Diagram illustrating the safety features including VRD, overcurrent, overheat, and overvoltage protection, along with the 45% duty cycle.

Image: Close-up of the LCD display showing current, mode selection (MMA/ARC, LIFT TIG), and welding rod size settings.

5. 설정

Before operating the welding machine, ensure proper setup:

1. 전원 연결: Connect the power cable to a suitable 100V household outlet.
2. 접지 Clamp 연결: Connect the earth cable to the designated terminal on the welding machine and securely attach the ground clamp 공작물에.
3. Welding Holder Connection: Connect the welding holder cable to the appropriate terminal on the machine.
4. Welding Rod Insertion: Insert the welding rod into the welding holder. Ensure it is securely fastened.
5. 모드 선택: Use the control knob to select either MMA/ARC or LIFT TIG mode.
6. 현재 조정: Adjust the welding current according to the material thickness and welding rod specifications.

6. 사용 설명서

6.1. MMA/ARC Welding (Stick Welding)

1. Ensure the machine is set to MMA/ARC mode.
2. Select the appropriate welding current based on the welding rod diameter and material thickness.
3. Strike the welding rod against the workpiece to initiate the arc.
4. Maintain a consistent arc length and travel speed while moving the rod along the joint.
5. After welding, use the wire brush to remove any slag from the weld bead.

6.2. LIFT TIG Welding

Note: A WP-17V TIG torch is required and sold separately for LIFT TIG welding.

1. Connect the TIG torch to the appropriate terminals on the welding machine.
2. 기계가 리프트 TIG 모드로 설정되어 있는지 확인하십시오.
3. Gently touch the tungsten electrode to the workpiece to initiate the arc.
4. Lift the torch slightly to establish the arc and begin welding.
5. Feed filler rod manually into the weld puddle as needed.

이미지: 전amples of clean and stable weld beads achieved with the HITBOX ARC200D MINI, demonstrating low spatter and good arc stability.

Image: A guide showing compatible welding rod sizes (1.6mm, 2.0mm, 2.5mm) and applicable plate thicknesses (0.8mm-5mm for MMA, 0.3mm-3mm for LIFT TIG) for various materials like carbon steel, iron, and mild steel.

7. 유지관리

Regular maintenance ensures the longevity and optimal performance of your welding machine:

• 청소: Periodically clean the machine's exterior and ventilation openings to prevent dust buildup. Use a dry, soft cloth.
• 케이블 검사: Regularly check all cables (power, welding holder, earth) for cuts, fraying, or damage. Replace damaged cables immediately.
• 저장: 사용하지 않을 때는 건조하고 먼지가 없는 환경에 기기를 보관하십시오.
• Welding Rods: Store welding rods in a dry place to prevent moisture absorption, which can affect weld quality.

8. 문제 해결

If you encounter issues with your HITBOX ARC200D MINI, refer to the following common troubleshooting tips:

• 전원 없음: Check the power cable connection, wall outlet, and ensure the power switch is ON. Verify the circuit breaker has not tripped.
• 아크 없음: 접지선을 확보하세요amp is securely attached to the workpiece and the welding holder is properly connected. Check the welding rod for proper insertion and contact.
• Weak Arc/Poor Weld: Verify the welding current setting is appropriate for the material and rod size. Ensure the welding rod is dry and not expired. Check for proper voltag전자 공급.
• Overheat Indicator (OC) On: The machine has overheated. Turn off the machine, allow it to cool down for several minutes, and ensure ventilation is not obstructed.
• Welding Rod Sticking: This can occur if the current is too low, the arc length is too short, or the rod is not properly conditioned. Increase current, adjust technique, or replace the rod.

If the problem persists after attempting these solutions, please contact HITBOX customer support.

9. 사양

10. 보증 및 지원

The HITBOX ARC200D MINI comes with a 2년 품질 보증 구매일로부터.

For any questions, concerns, or technical support, please contact HITBOX customer service through your purchase platform. Refer to your purchase details for specific contact methods.