1. 서론
Thank you for choosing the Bestway Hydro-Force Auto Electric Air Pump 12V. This electric pump is designed for efficient and convenient inflation of inflatable paddle boards, stand-up paddleboards (SUPs), and kayaks. It features a 12V power connection, adjustable pressure settings, an easy-to-read LCD display, and an automatic shut-off function to prevent over-inflation. Please read this manual thoroughly before use to ensure proper operation and safety.
2. 안전 정보
- Always connect the pump to a 12V DC power source (car or boat accessory outlet). Do not attempt to connect to other power sources.
- 습기가 있는 환경에서 펌프를 작동시키거나 물에 담그지 마십시오.
- 펌프가 작동하는 동안 어린이와 애완동물이 펌프에 접근하지 못하도록 하세요.
- Ensure the hose is securely attached to both the pump and the inflatable valve before starting inflation.
- Do not exceed the recommended pressure for your inflatable product. Refer to your inflatable's manual for specific pressure requirements.
- 과열을 방지하기 위해 장기간 사용 후에는 펌프를 식히십시오.
- Disconnect the pump from the power source when not in use or during maintenance.
- 작동 중에는 공기 흡입구나 배출구를 막지 마십시오.
3. 패키지 내용
패키지에 모든 구성품이 들어 있는지 확인하세요.
- 1 x Hydro-Force Auto Electric Air Pump
- 1 x 유연한 호스
- 1 x Washer (for hose connection)
4. 설정
유연 호스를 연결하세요: Attach one end of the flexible hose to the pump's inflation port by twisting it clockwise until secure. Ensure the washer is properly seated to prevent air leaks.
Image: Flexible hose with yellow connectors, coiled, ready for attachment to pump and inflatable.
풍선 제품에 연결하기: Attach the other end of the flexible hose to the valve of your inflatable paddle board, SUP, or kayak. Use the appropriate adapter if necessary. Twist to secure the connection.
Image: Connecting the pump hose to an inflatable paddle board.
전원에 연결: Insert the 12V DC power connector into your vehicle's or boat's 12V accessory outlet (cigarette lighter socket).
Image: Connecting the pump to a 12V car power outlet.
5. 사용 설명서
전원 켜기: Once connected to power, press the power button (ⓘ) on the pump's control panel to turn it on. The LCD display will illuminate.
Image: Pump control panel with LCD display and buttons.
단위 선택: 를 누르세요 PSI/BAR button to toggle between Pounds per Square Inch (PSI) and Bar pressure units, depending on your preference or inflatable's specification.
원하는 압력 설정: 사용하세요 + 그리고 - buttons to adjust the target inflation pressure. The pressure can be set in increments of 0.5 PSI. Refer to your inflatable's manual for the correct pressure.
인플레이션 시작: Once the desired pressure is set, press the power button (ⓘ) again to start the inflation process. The pump will begin to inflate your product, and the current pressure will be displayed on the LCD screen.
자동 종료: The pump will automatically stop once the preset pressure is reached, preventing over-inflation and ensuring the safety of your inflatable.
연결 해제: After inflation is complete and the pump has shut off, disconnect the hose from the inflatable valve and then unplug the 12V power connector from the outlet.
6. 유지관리
- 청소: 펌프 외부를 부드러운 천으로 닦으세요.amp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the pump is completely dry before storage.
- 저장: Store the pump and its accessories in a dry, cool place, away from direct sunlight and extreme temperatures. Keep the hose coiled neatly to prevent kinks or damage.
- 점검: Periodically inspect the power cord, hose, and connectors for any signs of wear or damage. Do not use the pump if any components are damaged.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 펌프가 켜지지 않습니다. | No power from 12V outlet; loose connection; blown fuse in vehicle. | Check 12V outlet for power; ensure power plug is fully inserted; check vehicle's fuse box. |
| Pump runs but inflatable does not inflate or inflates slowly. | Hose not securely attached; air leak at connections; inflatable valve not fully open. | Ensure hose is tightly connected to pump and inflatable; check for leaks; ensure inflatable valve is in the open position. |
| Pump overheats and shuts off. | 장기간 연속 사용. | Allow the pump to cool down for at least 30 minutes before resuming operation. |
| Pump does not reach desired pressure. | Air leak; maximum pressure limit reached. | Check all connections for leaks. Ensure the desired pressure is within the pump's maximum capacity (16 PSI). |
8. 사양
- 모델 번호: 65315
- 상표: 베스트웨이
- 전원: 12V DC (유선 전기)
- 최대 압력: 16 PSI (1.10 바)
- 작동 모드: 오토매틱
- 제품 크기(길이 x 너비 x 높이): 9.25" x 5.51" x 5.12"(23.5cm x 14cm x 13cm)
- 품목 무게: 1.19 킬로그램
- 호스 길이: 2.75 미터
- 재료: 플라스틱
- 포함된 구성 요소: 1 electric pump, 1 flexible hose, 1 washer
9. 보증 및 지원
보증 정보 또는 기술 지원에 대해서는 구매 시 제공된 문서를 참조하거나 공식 Bestway를 방문하십시오. web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
베스트웨이 공식 Web대지: www.bestwaycorp.com