SUPRENT Professional Hair Clipper and Trimmer Kit Instruction Manual

1. 서론

Thank you for choosing the SUPRENT Professional Hair Clipper and Trimmer Kit. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your new grooming device. Please read these instructions thoroughly before first use and retain them for future reference.

2. 중요 안전 지침

• Always keep the device away from water. Do not use it while bathing or showering.
• Avoid using the clipper near the face or eyes to prevent injury.
• Do not ingest or inhale small parts. Keep out of reach of children.
• 본 기기는 신체적, 감각적 또는 정신적 능력이 저하된 사람(어린이 포함)이나 경험 및 지식이 부족한 사람이 사용하도록 의도된 것이 아니며, 안전을 책임질 사람으로부터 기기 사용에 관한 감독이나 지시를 받은 경우에만 사용할 수 있습니다.
• Regularly clean the device to ensure optimal performance and hygiene.
• 보관하기 전에 기기가 완전히 건조되었는지 확인하십시오.

3. 패키지 내용

Your SUPRENT Professional Hair Clipper and Trimmer Kit includes the following items:

• Hair Clipper/Trimmer Unit
• 조절 가능한 블레이드
• 6 Clipper Combs (various lengths)
• T-블레이드 트리머
• 3 Attachment Combs for T-Blade Trimmer
• Type-C 충전 케이블
• 청소용 브러시
• 블레이드 오일

Image: The SUPRENT Hair Clipper and Trimmer Kit, showcasing the main clipper, T-blade trimmer, various guide combs, charging cable, and cleaning accessories.

4. 설정

4.1 장치 충전

Before initial use, fully charge the hair clipper. The device features a Lithium-Ion battery.

1. Connect the provided Type-C charging cable to the charging port on the clipper.
2. 케이블의 다른 쪽 끝을 적합한 USB 전원 어댑터(포함되지 않음)에 꽂습니다.
3. The LED display will indicate the charging status. Charge until the display shows a full battery (typically 100%).
4. A full charge takes approximately 3 hours and provides up to 180 minutes of runtime.

Image: The hair clipper connected to a USB-C charging cable, with its LED display showing the battery percentage and charging indicator.

4.2 가이드 빗 부착

To achieve desired hair lengths, attach the appropriate guide comb:

1. 클리퍼가 꺼져 있는지 확인하세요.
2. Select the desired clipper comb or T-blade trimmer attachment.
3. 빗을 클리퍼 블레이드에 맞춰서 딸깍 소리가 날 때까지 단단히 밀어 넣으세요.
4. 제거하려면 빗을 칼날에서 살짝 당겨 빼냅니다.

Image: The main hair clipper shown with a selection of professional guide combs, indicating different cutting lengths from 3mm to 19mm, and 1.5mm to 4.5mm for the trimmer.

5. 운영

5.1 General Hair Cutting

1. Ensure the clipper is fully charged and the desired guide comb is securely attached.
2. 전원 스위치를 사용하여 클리퍼를 켭니다.
3. Guide the clipper over the desired area of the head, face, or neck. For best results, move the clipper against the natural direction of hair growth.
4. Use smooth, even strokes. Do not force the clipper through thick hair.
5. The adjustable taper lever allows for fine-tuning cutting lengths (0.5mm, 1mm, 1.5mm, 2mm, 2.5mm) without changing combs.

이미지: 클로즈업 views of the SUPRENT Professional Hair Clipper, highlighting its self-sharpened titanium-coated blades for sharpness and durability, and the adjustable taper lever for precise control over cutting length.

5.2 Precise Trimming and Edging

For detailed work, such as outlining, edging, or beard trimming, use the T-blade trimmer:

1. Ensure the T-blade trimmer is attached and powered on.
2. The T-blade is factory-calibrated for a zero-gap cut (approximately 0.1mm), requiring no manual adjustment.
3. Carefully guide the trimmer along the desired lines for styling, sculpting, and trimming.
4. Use the smaller attachment combs for the T-blade trimmer for specific beard lengths if needed.

Image: A close-up of the SUPRENT T-blade trimmer in action, demonstrating its factory-calibrated zero-gap capability for precise trimming and detailing around the hairline.

5.3 비디오 데모

6. 유지관리

6.1 Cleaning the Blades and Device

정기적인 청소는 이발기의 수명과 성능을 유지하는 데 도움이 됩니다.

1. 클리퍼의 전원을 끄고 모든 전원에서 분리하세요.
2. 부착된 가이드 빗을 제거하세요.
3. 제공된 청소 브러시를 사용하여 칼날과 클리퍼 본체에서 머리카락을 제거하세요.
4. Wipe the clipper and attachments with a damp cloth. Do not rinse the entire unit under water unless specified as waterproof (this model is not specified as fully waterproof).
5. 재조립 또는 보관하기 전에 모든 부품을 완전히 건조시키십시오.

6.2 블레이드 오일링

칼날의 날카로움과 원활한 작동을 유지하려면 칼날에 정기적으로 기름칠을 하십시오.

1. After cleaning, apply a few drops of the included blade oil to the teeth of the blades.
2. 클리퍼를 몇 초간 켜서 오일이 고르게 퍼지도록 하세요.
3. 깨끗한 천으로 여분의 기름을 닦아냅니다.

7. 문제 해결

If you encounter issues with your SUPRENT Hair Clipper, refer to the following common solutions:

• 클리퍼가 켜지지 않음: Ensure the battery is fully charged. If the issue persists, try using the clipper while connected to the charging cable (if supported for corded operation).
• 절단 성능이 좋지 않음: Clean the blades thoroughly to remove any hair buildup. Apply blade oil. Ensure the correct guide comb is properly attached. Blades may need replacement if they are dull.
• 과도한 소음이나 진동: Clean and oil the blades. Ensure no foreign objects are lodged in the blade mechanism.

For further assistance, please contact SUPRENT customer support.

8. 사양

9. 보증 및 지원

No specific manufacturer warranty information is provided with this product. For any product-related inquiries, technical support, or warranty claims, please contact the seller or SUPRENT customer service directly through their official channels.