1. 서론
This manual provides essential information for the installation, operation, and maintenance of your Fydun M5 LCD Display. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
The Fydun M5 LCD Display is a versatile electric meter designed for electric bikes and scooters. It features a clear display for essential riding data and is built for durability and ease of use.
2. 제품 오버view
The M5 LCD Display offers a clear interface for monitoring your electric vehicle's performance. Key features include:
- 방수 디자인 : The display is designed to withstand various weather conditions, ensuring reliable operation even in rain.
- 내구성 있는 구조: Built with premium ABS material and sturdy wiring, it ensures a low failure rate and long-term performance.
- 간편한 설치: Compatible with 31.8mm and 22.2mm mounting apertures, facilitating straightforward installation on most electric bikes and scooters.
- 교체 부품: An ideal component for replacing old or damaged displays, restoring full functionality and enhancing the vehicle's appearance.
이미지: 앞면 view of the Fydun M5 LCD Display with its control unit and connector cable.
Image: Visual representation highlighting the display's waterproof design and suitability as a replacement part.
3. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | Fydunrkt1qmx8oz |
| 권tag전자 호환성 | 24V, 36V, 48V, 60V Universal |
| 핀 구성 | 5 Pin Electric Meter |
| 장착 조리개 | 31.8mm(옵션 22.2mm) |
| 재료 | 프리미엄 ABS |
| 디스플레이 유형 | 액정표시장치 |
Image: Diagram showing the dimensions of the M5 LCD Display and the pinout for the 5-pin connector.
4. 상자 안에 무엇이 들어있나요?
패키지를 열면 다음 품목이 들어 있습니다.
- 1 x Electric LCD Meter (Fydun M5 LCD Display)
- 1 x 사용 설명서(이 문서)
- 연결 케이블 1개
5. 설정 및 설치
Follow these steps to properly install your Fydun M5 LCD Display:
- 핸들바를 준비하세요: Ensure the handlebar area where you intend to mount the display is clean and free from obstructions. The display supports 31.8mm and 22.2mm handlebar diameters.
- 디스플레이 장착: Securely attach the display bracket to your electric bike or scooter's handlebar. Use the appropriate mounting aperture for your handlebar size. Tighten the screws firmly but do not overtighten.
- 제어 장치를 연결하십시오: Attach the separate control unit (buttons) to a convenient location on your handlebar, typically near your thumb for easy access.
- Connect the 5-Pin Cable: Locate the 5-pin connector on your electric bike/scooter's controller or wiring harness. Carefully align the pins and connect the display's cable. Ensure a snug fit. Refer to the pinout diagram for correct wiring if you are performing a custom installation or replacement.
- 케이블 관리 : Route the cables neatly along the handlebar and frame, securing them with cable ties if necessary, to prevent interference with steering or moving parts.
- 초기 전원 켜기: After installation, power on your electric bike/scooter to check if the display illuminates and shows data correctly.
Image: The M5 LCD Display and its control unit mounted on a bicycle handlebar, showing the typical installation setup.
Image: Detailed diagram of the 5-pin connector, indicating the color and function of each wire (Red, Blue, Black, Green, Yellow).
6. 사용 설명서
The Fydun M5 LCD Display provides real-time information and control for your electric vehicle. Here's how to operate it:
6.1 전원 켜기/끄기
- To power on the display, press and hold the power button (usually the middle button on the control unit) for a few seconds.
- 전원을 끄려면 디스플레이가 꺼질 때까지 전원 버튼을 다시 길게 누르세요.
6.2 디스플레이 정보
The display typically shows the following information:
- 속도: 현재 주행 속도(km/h 또는 mph).
- 배터리 수준: An energy bar indicating the remaining battery charge.
- 여행 거리: 이번 여정 중 이동 거리.
- 크루즈 컨트롤: Indication if cruise control is active.
- 수동 모드: Indication if manual mode is active.
6.3 Button Functions (Control Unit)
The control unit typically has three buttons:
- 위쪽 버튼(▲): Used to increase values, navigate menus, or activate certain functions (e.g., higher assist level).
- 아래쪽 버튼(▼): Used to decrease values, navigate menus, or activate certain functions (e.g., lower assist level).
- Middle Button (M / Power): Used to power on/off, confirm selections, or switch display modes (e.g., between ODO, Trip, Time).
Note: Specific button functions and display modes may vary slightly depending on the electric vehicle's controller settings. Refer to your vehicle's main manual for advanced settings.
이미지: 클로즈업 view of the three-button control unit, showing the Up, Down, and Middle (M) buttons.
7. 유지관리
To ensure the longevity and optimal performance of your Fydun M5 LCD Display, follow these maintenance guidelines:
- 청소: 디스플레이 화면과 본체는 부드러운 천으로 닦아주세요.amp 천. 연마성 세제, 용제 또는 강한 화학 물질은 화면이나 c를 손상시킬 수 있으므로 사용하지 마십시오.asing.
- 물 노출: While the display is waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the connector is always dry before connecting or disconnecting.
- 케이블 검사: Periodically check all cables and connectors for any signs of wear, fraying, or damage. Ensure connections are secure.
- 저장: If storing your electric vehicle for an extended period, ensure the display is clean and dry. Store in a cool, dry place away from direct sunlight.
- 충격 방지: Protect the display from physical impacts or drops, which can cause internal or external damage.
8. 문제 해결
If you encounter issues with your Fydun M5 LCD Display, refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이의 전원이 켜지지 않습니다. |
|
|
| 속도 또는 거리 측정값이 잘못되었습니다. |
|
|
| 버튼이 반응하지 않습니다. |
|
|
If the problem persists after attempting these solutions, please contact Fydun customer support for further assistance.
9. 보증 및 지원
Fydun products are manufactured to high-quality standards. For warranty information and customer support, please refer to the warranty card included with your purchase or visit the official Fydun web대지.
When contacting support, please have your product model number (Fydunrkt1qmx8oz) and purchase date available.