DEVMO Windshield Washer Motor Pump

1. 제품 오버view

The DEVMO Windshield Washer Motor Pump is a replacement component designed to restore the functionality of your vehicle's windshield washer system. This pump is responsible for delivering washer fluid from the reservoir to the windshield nozzles, enabling clear visibility during driving.

이미지 1.1: 앞면 view of the DEVMO Windshield Washer Motor Pump, showing the fluid outlet and electrical connector.

2. 호환성

This windshield washer motor pump is compatible with specific vehicle models and years. Please verify your vehicle's make, model, and year against the list below to ensure proper fitment.

• Civic: 2016-2020
• 통찰력: 2019-2021 (1.5L models)

교체 부품 번호: 76806-TBA-A01, 76806TBAA01, 76806 TBA A01, AW060210-6410

Important: Always cross-reference the part number on your original component with the replacement part number to confirm compatibility before installation.

3. 특징

• Direct replacement for the original equipment manufacturer (OEM) part.
• Constructed from high-quality ABS plastic for durability and long-lasting performance.
• Designed to meet or exceed OEM specifications for reliable operation.

4. 패키지 내용

패키지에는 다음 품목이 포함되어 있습니다.

• 1 x DEVMO Windshield Washer Motor Pump (Part Number: 76806-TBA-A01 / AW060210-6410)

5. 설치 가이드

Installation of a windshield washer pump typically involves working with vehicle fluids and electrical connections. If you are not experienced with automotive repairs, it is recommended to seek professional assistance.

5.1. 필요한 도구 및 재료

• Basic hand tools (e.g., screwdrivers, pliers, socket wrench set)
• Drain pan (if draining washer fluid)
• New windshield washer fluid (optional)
• 보안경 및 장갑

5.2. 설치 단계(일반)

1. 안전이 최우선입니다. 차량 시동이 꺼져 있고 시동 키가 분리되어 있는지 확인하세요. 차량 배터리의 음극 단자를 분리하여 우발적인 누전을 방지하세요.
2. Locate the Washer Reservoir: The windshield washer fluid reservoir is typically located under the hood, often on one side of the engine bay.
3. 펌프에 접근하세요: Depending on your vehicle model, you may need to remove splash shields, fender liners, or other components to gain access to the washer pump.
4. Drain Fluid (Optional): If the reservoir is full, you may wish to drain the fluid to minimize spills during pump removal.
5. 전기 커넥터 분리: Carefully disconnect the electrical wiring harness from the old pump.
6. Remove Hoses: Disconnect the washer fluid hoses from the old pump. Be prepared for some fluid leakage.
7. 오래된 펌프 제거: The pump is usually held in place by a rubber grommet or a clip. Gently pull or unclip the old pump from the reservoir.
8. 새 펌프 설치: Insert the new DEVMO pump into the reservoir, ensuring it seats firmly in the grommet.
9. Reconnect Hoses and Electrical: Reattach the washer fluid hoses and the electrical connector to the new pump. Ensure all connections are secure.
10. 리필 저수조: Fill the washer fluid reservoir with appropriate windshield washer fluid.
11. 배터리를 다시 연결하십시오: 차량 배터리의 음극 단자를 다시 연결합니다.
12. 테스트 기능: Turn on the vehicle and test the windshield washer system to ensure the new pump operates correctly and delivers fluid to the nozzles. Check for any leaks.

이미지 5.1: 상단 view of the pump, showing the electrical connector port.

이미지 5.2: 측면 view of the pump, highlighting the fluid outlet nozzle.

이미지 5.3: 각도 view of the pump, showing both the electrical connector and fluid outlet.

6. 운영

Once installed, the DEVMO Windshield Washer Motor Pump operates automatically when the windshield washer function is activated from inside the vehicle. It draws fluid from the washer reservoir and pumps it through the hoses to the windshield washer nozzles, allowing for effective cleaning of the windshield.

7. 유지관리

The windshield washer pump itself typically requires no routine maintenance. However, to ensure its longevity and proper function, consider the following:

• Use Quality Washer Fluid: Always use dedicated windshield washer fluid. Avoid using plain water, especially in freezing temperatures, as it can freeze and damage the pump or lines.
• Keep Reservoir Clean: Periodically inspect the washer fluid reservoir for debris or sediment, which can clog the pump or nozzles.
• Check Hoses and Nozzles: Ensure that the washer fluid hoses are not kinked or cracked and that the nozzles are clear of obstructions.

8. 문제 해결

If you encounter issues after installing the new pump, consider the following common problems and solutions:

• Pump Does Not Operate:
  • Check electrical connection to the pump. Ensure it is securely plugged in.
  • Verify the vehicle's fuse for the windshield washer system. Replace if blown.
  • Ensure the washer fluid reservoir is not empty.
  • Confirm the electrical connector on the pump matches your vehicle's harness. Some vehicle models may have variations in connectors even within the same year range.
• No Fluid Sprays / Weak Spray:
  • Check for kinks or blockages in the washer fluid hoses.
  • Inspect the windshield washer nozzles for clogs. They can often be cleared with a thin needle.
  • Ensure the pump is fully submerged in fluid within the reservoir.
• Pump Does Not Fit Reservoir:
  • Double-check the compatibility list and part numbers. While this pump is designed as a direct replacement, minor variations in vehicle manufacturing or previous repairs can sometimes lead to fitment issues.
  • Ensure the rubber grommet in the reservoir is correctly seated and not damaged.

9. 사양

10. 보증 및 지원

This DEVMO Windshield Washer Motor Pump comes with a 12개월 보증 구매일로부터.

If you have any questions, require technical assistance, or need to make a warranty claim, please contact DEVMO customer support through the platform where the product was purchased (e.g., Amazon Message).