CREWORKS 자동 열 프레스기 사용 설명서

1. 서론

Thank you for choosing the CREWORKS Auto Heat Press Machine. This smart 15x15 inch heat press is designed for professional and efficient heat transfer printing on various materials, including T-shirts, mouse pads, and canvas bags. It features automatic press and release, intuitive digital controls, and even heating for consistent results. Please read this manual thoroughly before operation to ensure safe and proper use.

안전 정보

WARNING: Always follow basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury.

• Keep hands clear of the heating platen during operation.
• 기계를 안정적이고 내열성이 있는 표면에 놓으세요.
• 젖은 손이나 d로 기계를 작동하지 마십시오.amp 정황.
• Unplug the machine when not in use or before cleaning/maintenance.
• The machine features an auto-shutoff after 30 minutes of inactivity for safety.
• The innovative pull-out lower platen helps prevent burns by keeping the placing and heating areas apart.

Figure 1.1: CREWORKS 15x15 Inch Auto Heat Press Machine.

2. 패키지 내용

Verify that all items listed below are included in your package. If any items are missing or damaged, please contact CREWORKS customer support.

• CREWORKS Auto Heat Press Machine (15x15 Inch)
• 내열장갑
• 드라이버
• 사용자 설명서

Figure 2.1: Heat Press Machine and included accessories.

3. 제품 사양

Figure 3.1: Product dimensions of the heat press machine.

4. 설정 가이드

Follow these steps to set up your CREWORKS Auto Heat Press Machine:

1. 언박싱: 열 프레스와 모든 부속품을 포장에서 조심스럽게 꺼내십시오. 나중에 보관하거나 운반할 때를 대비하여 포장재를 보관하십시오.
2. 놓기: Place the machine on a sturdy, flat, and heat-resistant surface. Ensure there is adequate space around the machine for ventilation and safe operation.
3. 전원 연결: Plug the power cord into a grounded 110V AC outlet. Ensure the power switch is in the OFF position before plugging in.
4. 초기 검사: Before first use, inspect the machine for any visible damage. Ensure the lower platen slides smoothly and the upper platen moves freely.

5. 사용 설명서

This section details the steps for operating your heat press machine.

5.1. 전원 켜기 및 초기 설정

1. 전원 켜기: Flip the main power switch to the ON position. The LCD display will illuminate.
2. 설정 온도: Press the 'SETUP' button on the LCD panel. Use the 'PLUS' and 'MINUS' buttons to adjust the desired temperature (up to 480°F). Press 'SETUP' again to confirm.
3. 설정 시간: After setting the temperature, the time setting will become active. Use the 'PLUS' and 'MINUS' buttons to set the desired pressing time (up to 999 seconds). Press 'SETUP' again to confirm.
4. Selecting Mode (Optional): The machine features 3 preset temperature and timer modes. Use the 'MODE' button to cycle through these presets or to return to custom settings.
5. 압력 조정: The machine offers 5 pressure levels. Adjust the pressure based on the thickness of your material. For thicker materials (up to 1.2 inches), higher pressure may be required.

Figure 5.1: Intuitive LCD Display for temperature and time control.

Figure 5.2: The heat press offers 5 adjustable pressure levels for various materials.

5.2. 열 전달 과정

1. 예열: Allow the machine to reach the set temperature. The LCD will indicate when it's ready. The 1400W dual electric heating tubes ensure fast and even heating.
2. 재료 준비: Place your T-shirt or other material onto the pull-out lower platen. Smooth out any wrinkles.
3. 위치 설계: Place your transfer design (e.g., HTV, sublimation print) onto the material.
4. 누르기: Slide the lower platen back into position. Press the 'MODE' button (or the designated start button) to initiate the automatic pressing cycle. The machine will automatically press down.
5. Auto-Release: Once the set time expires, the machine will automatically release and pop open.
6. 재료 제거: Carefully slide out the lower platen and remove your finished item. Allow it to cool before handling the transfer if required by your transfer material.

6. 유지관리 및 관리

적절한 유지 관리는 열전사 프레스 기계의 수명과 최적의 성능을 보장합니다.

• 청소: Regularly wipe down the exterior of the machine with a soft, dry cloth. For the heating platen, ensure it is cool before gently wiping with a damp 천. 연마성 세척제는 사용하지 마십시오.
• Platen Care: Keep the silicone pad and foam pads clean and free of debris. Replace them if they become worn or damaged to ensure even pressure.
• 저장: 사용하지 않을 때는 건조하고 먼지가 없는 환경에 기기를 보관하십시오.
• 점검: 모든 나사와 연결부가 안전한지 주기적으로 점검하세요.

7. 문제 해결

이 섹션에서는 열 프레스 기계에서 발생할 수 있는 일반적인 문제에 대해 설명합니다.

8. 보증 및 지원

The CREWORKS Auto Heat Press Machine is FCC certified, ensuring compliance with relevant safety standards.

For warranty information, technical support, or replacement parts, please contact CREWORKS customer service through the retailer's platform or the official CREWORKS website. Please have your model number (ZD-888) and purchase date available when contacting support.