ADDIESDIVE AD2048

ADDIESDIVE Automatic NH35 Wrist Watch Instruction Manual

모델: AD2048

소개

Thank you for choosing the ADDIESDIVE Automatic NH35 Wrist Watch. This manual provides essential information for the proper setup, operation, and maintenance of your timepiece. Please read these instructions carefully to ensure optimal performance and longevity of your watch.

제품 끝view

The ADDIESDIVE AD2048 is an automatic mechanical watch featuring a reliable NH35 movement, 200 meters of water resistance, and a luminous dial for enhanced readability in low light conditions. It combines classic design with robust functionality.

ADDIESDIVE AD2048 Automatic Watch with black dial and brown leather strap

Image: The ADDIESDIVE AD2048 automatic watch, showcasing its black dial, white numerals, and brown leather strap.

설정

1. 초기 권선

Your ADDIESDIVE watch is powered by an automatic mechanical movement. If the watch has stopped, it needs to be manually wound to initiate operation. To do this, unscrew the crown (if it's a screw-down crown) and turn it clockwise approximately 20-30 times. This will build up a power reserve to start the watch.

시계 용두의 클로즈업 사진

이미지: 클로즈업 view of the watch crown, used for winding and setting the time and date.

2. 시간 및 날짜 설정

  1. 크라운을 풀어주세요: 시계에 스크류다운 크라운이 있는 경우, 크라운이 0 위치로 튀어나올 때까지 시계 반대 방향으로 살살 돌려 빼내십시오.
  2. 날짜를 설정하세요(1번째 위치): Pull the crown out to the first click (Position 1). Turn the crown clockwise or counter-clockwise (depending on the movement) to adjust the date. Avoid setting the date between 9 PM and 3 AM, as this can damage the movement. If the current time falls within this window, adjust the time outside this range first.
  3. 시간 설정(위치 2): Pull the crown out to the second click (Position 2). Turn the crown to set the hour and minute hands. To ensure correct AM/PM, advance the hands past 12 o'clock; if the date changes, you are in PM. Continue setting the time.
  4. 크라운을 누르고 조이세요: Once the time and date are set, push the crown back into Position 0 and screw it down clockwise firmly to ensure water resistance.

Video: A demonstration of setting the time and date on the ADDIESDIVE AD2048 automatic watch, including crown operation and date adjustment.

3. 스트랩 조절

The watch comes with a leather strap and a buckle clasp. Adjust the strap to a comfortable fit on your wrist, ensuring it is not too tight or too loose. The buckle should sit centrally on the underside of your wrist.

Close-up of the watch's leather strap and buckle

Image: Detail of the brown leather strap and polished silver buckle of the ADDIESDIVE watch.

시계 작동하기

Automatic Movement (NH35)

Your watch is equipped with a Japanese Automatic NH35 movement. This movement is self-winding, meaning it gains power from the motion of your wrist. When worn regularly, it will maintain its power reserve. If the watch is not worn for an extended period, it may stop and require manual winding as described in the "Initial Winding" section.

Water Resistance (200 Meters)

The ADDIESDIVE AD2048 watch is water-resistant up to 200 meters (20 ATM). This makes it suitable for swimming, snorkeling, and recreational diving. Ensure the crown is always fully screwed down before any water exposure. Do not operate the crown or pushers while the watch is submerged in water.

Close-up of the watch case back with water resistance engraving

Image: The engraved stainless steel case back, indicating "AUTOMATIC MOVEMENT NH35" and "DIVER'S 200M" water resistance.

야광 다이얼

The watch features a luminous dial and hands, allowing for easy readability in low-light conditions. The luminous material charges by absorbing light and then emits it in the dark. The intensity and duration of the glow depend on the exposure to light.

ADDIESDIVE watch dial glowing in the dark

Image: The ADDIESDIVE watch dial displaying its luminous hands and hour markers in a dark environment.

유지

청소

Wipe the watch case and crystal with a soft, dry cloth regularly to remove dust and fingerprints. For stubborn dirt, a slightly damp 천을 사용하여 세척 후 바로 말리세요. 강한 화학 물질이나 연마재는 사용하지 마세요.

물 노출

After exposure to saltwater, rinse the watch thoroughly with fresh water and dry it completely with a soft cloth. This prevents salt buildup and corrosion. Always ensure the crown is screwed down before rinsing.

스트랩 관리

The leather strap should be kept dry and clean. Avoid prolonged exposure to direct sunlight, extreme temperatures, and moisture, as these can cause the leather to crack, fade, or deteriorate. If the strap gets wet, allow it to air dry naturally, away from direct heat.

저장

When not wearing your watch, store it in a cool, dry place, preferably in its original box or a watch case. Keep it away from strong magnetic fields (e.g., speakers, refrigerators, certain electronic devices) as magnetism can affect the accuracy of mechanical movements.

문제 해결

  • 시계가 실행되지 않음: If the watch has stopped, manually wind it by turning the crown clockwise 20-30 times. If it still does not start, ensure the crown is pushed in and screwed down.
  • 시간이 부정확함: Mechanical watches can experience slight variations in accuracy. If your watch is consistently running too fast or too slow beyond acceptable limits (typically +/- 20 seconds per day for an NH35 movement), it may require adjustment by a professional watchmaker. Exposure to strong magnetic fields can also affect accuracy; demagnetization may be necessary.
  • 날짜가 변경되지 않음: Ensure the time is set correctly for AM/PM. The date typically changes around midnight. If the date is stuck, try manually advancing the time past midnight to see if it corrects. If not, check the crown position for date adjustment.
  • 시계 내부 물: If you notice condensation or water inside the watch, immediately take it to a qualified watchmaker for inspection and repair. Do not attempt to open the watch yourself, as this will void the warranty and can cause further damage.

명세서

모델 이름:AD2048
움직임:Japanese Automatic NH35
케이스 소재:스테인리스 스틸
결정:합성 사파이어
방수 기능:200미터(20ATM)
케이스 직경:39mm (XNUMXmm)
케이스 두께:12mm (XNUMXmm)
대역폭:20mm (XNUMXmm)
밴드 소재:가죽
다이얼 색상:검은색
총명한:
무게:0.26킬로그램(약 9.17온스)
Diagram showing watch dimensions: 39mm case diameter, 49mm lug-to-lug, 12mm case thickness, 20mm band width, and 72g weight.

Image: A diagram illustrating the key dimensions of the ADDIESDIVE AD2048 watch, including case diameter, lug-to-lug distance, case thickness, and band width.

보증 및 지원

보증 정보

Your ADDIESDIVE watch is covered by a seller warranty. Please refer to your purchase documentation for specific terms and conditions of the warranty, including coverage period and what is included. Keep your proof of purchase for any warranty claims.

고객 지원

For any questions, concerns, or technical assistance regarding your ADDIESDIVE watch, please contact the seller or ADDIESDIVE customer support through the platform where the purchase was made. Provide your model number (AD2048) and purchase details for efficient service.

© 2026 ADDIESDIVE. All rights reserved.

본 설명서는 정보 제공 목적으로만 제공됩니다. 제품 사양은 예고 없이 변경될 수 있습니다.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.