FLARING 플라즈마 절단기 사용 설명서

1. 안전 정보

Always prioritize safety when operating the FLARING Plasma Cutter. Failure to follow safety guidelines can result in serious injury or property damage.

• 개인 보호 장비(PPE): Always wear appropriate PPE, including a welding helmet with a suitable shade, flame-resistant clothing, heavy-duty gloves, and safety shoes.
• 통풍: Ensure adequate ventilation in the work area to disperse fumes and gases produced during cutting. Avoid working in confined spaces.
• 화재 위험: Keep flammable materials away from the cutting area. Have a fire extinguisher readily available. Sparks and molten metal can travel significant distances.
• 전기 안전: Connect the machine to a properly grounded power supply. Do not operate in wet conditions. Inspect cables and connections for damage before each use.
• 압축 공기 : Use clean, dry, oil-free compressed air. Ensure air pressure is within the recommended range.
• 뜨거운 표면: The torch and workpiece will become extremely hot during operation. Allow them to cool before handling.

2. 제품 오버view

The FLARING FC650D is a versatile and portable 65 Amp plasma cutter designed for efficient and clean cutting of various metal types. It features advanced IGBT inverter technology and dual voltage capability for flexible power options.

The FLARING FC650D Plasma Cutter and its included accessories.

Illustration of key features including large capacitance, dual voltage, strong heat dissipation, fast cutting, and ease of use.

주요 특징:

• High Efficiency Cutting: Max severance cut up to 4/5" (20 mm), ideal clean cut 1/2" (12.7mm) with 60% duty cycle.
• 듀얼볼tage: Operates on both 120V and 240V (50/60 Hz) power sources without manual relinking.
• 다양한 용도: Suitable for cutting aluminum, magnesium alloys, brass, stainless steel, cast iron, steel, copper, titanium, and other metal materials.
• 휴대성과 가벼움: Weighs only 8.4 pounds, making it easy to transport.
• 안정적이고 내구성이 뛰어남: Features automatic arc control for consistent cutting, reducing user fatigue.

The plasma cutter utilizes an Original IGBT chip for reliable performance.

An efficient cooling fan ensures strong heat dissipation during operation.

3. Components and Panel Introduction

Your FLARING FC650D Plasma Cutter comes with the following components:

• FC650D Plasma Cutter Unit
• PT31 Torch (9.9ft)
• Heavy-duty ground clamp 케이블로
• Air regulator and hose
• 7개의 전극
• 7 팁
• 가스 호스
• Conversion line 120V to 240V

A visual representation of the upgraded FC650D accessories included with your plasma cutter.

패널 소개:

상세한 view of the plasma cutter's control panel and connections.

1. LED 디지털 디스플레이
2. Current Adjustable Knob
3. 토치 커넥터
4. 토치 스위치
5. 지구 Clamp 커넥터
6. 전원 스위치
7. 전원 케이블
8. 압력 제어 노브
9. 냉각 팬
10. 압력계

4. 설정

1. 전원 연결: Connect the power cable to a suitable 120V or 240V (50/60 Hz) power outlet. The machine automatically detects the voltage. Use the provided conversion line if necessary.
2. 공기 공급 연결: Connect your compressed air source to the air regulator. Attach the air hose from the regulator to the plasma cutter's air inlet. Ensure the air supply is clean, dry, and oil-free. Set the air pressure using the Pressure Control Knob and monitor with the Pressure Gauge.
3. 토치 연결: Connect the PT31 Torch to the Torch Connector on the front panel. Ensure it is securely fastened.
4. 접지 Clamp 연결: Attach the heavy-duty ground clamp to the Earth Clamp Connector. Securely clamp 지상 CLamp 공작물이나 작업대 표면의 깨끗하고 노출된 금속 부분에 연결하여 양호한 전기 접촉을 확보하십시오.
5. Consumables Check: Verify that the torch tip and electrode are correctly installed and in good condition. Replace if worn.

5. 사용 설명서

Follow these steps for effective and safe plasma cutting:

1. 전원 켜기: Flip the Power Switch to the 'ON' position. The LED Digital Display will illuminate.
2. 전류 조정: Use the Current Adjustable Knob to set the desired cutting current (Amps) based on the material type and thickness. Refer to the specifications table for recommended settings.
3. 공기압 조절: Ensure the air pressure is set correctly for optimal cutting performance. The recommended range is typically indicated on the machine or in the specifications.
4. 작업물 준비: Ensure the workpiece is clean and free of rust, paint, or other contaminants that could interfere with the arc.
5. 아크 시작: Position the torch nozzle close to the edge of the workpiece. Press the Torch Switch to initiate the pilot arc.
6. 절단 시작: Once the pilot arc is established, move the torch steadily across the material. Maintain a consistent travel speed and standoff distance for a clean cut. The machine's automatic arc control helps maintain the arc, even over expanded metal.
7. 다양한 재료 절단: The FC650D is capable of cutting a wide range of metals, including steel, stainless steel, aluminum, copper, brass, and cast iron. Adjust current and speed accordingly.

Examples of plasma cutting on different metal thicknesses (5mm, 10mm, 15mm).

The plasma cutter is suitable for a wide range of applications, including various metals and alloys.

데모 영상:

6. 유지관리

정기적인 유지관리는 플라즈마 커터의 수명과 최적의 성능을 보장합니다.

• Consumable Replacement: Regularly inspect and replace worn torch tips and electrodes. Worn consumables can lead to poor cut quality and damage to the torch.
• 공기 필터/조절기: Periodically check and drain any moisture from the air filter/regulator. Ensure the filter element is clean to prevent contaminants from entering the torch.
• 청소: Keep the machine clean and free of dust and metal particles. Use compressed air to blow out internal components if necessary, ensuring the machine is unplugged.
• 케이블 검사: 전원, 토치, 접지 케이블 등 모든 케이블에 절단, 마모 또는 연결 불량이 있는지 점검하십시오. 손상된 케이블은 즉시 수리하거나 교체하십시오.

7. 문제 해결

If you encounter issues with your plasma cutter, refer to the following common problems and solutions:

If problems persist after attempting these solutions, please contact FLARING customer support.

8. 사양

Detailed technical specifications for the FLARING FC650D Plasma Cutter:

Official specification chart for the FC650D model.

9. 보증 및 지원

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact FLARING customer service directly. You can often find contact details on the manufacturer's official web사이트나 구매처를 통해 구매하세요.