ELECTROPRIME HOCO AC7 Storm Power Strip User Manual

1. 서론

This manual provides instructions for the safe and efficient use of your ELECTROPRIME HOCO AC7 Storm Power Strip. This device features three AC outlets, one USB-C port, and three USB-A ports, designed for convenient power distribution and charging of multiple electronic devices. Please read this manual thoroughly before operation and retain it for future reference.

2. 안전 지침

To prevent injury or damage to the device, always follow these basic safety precautions:

• Do not exceed the maximum power rating of 2500W (10A / 250V).
• 본 제품은 실내용으로만 설계되었습니다. 습기나 극한 온도에 노출시키지 마십시오.
• 기기를 분해, 개조하거나 수리하려고 시도하지 마십시오. 모든 서비스는 자격을 갖춘 전문가에게 맡기십시오.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• Ensure the power cord is fully extended and not coiled or covered when in use to prevent overheating.
• Insert plugs fully into the outlets. Loose connections can cause overheating.
• Do not use with appliances that draw more power than the strip's maximum capacity.

3. 제품 오버view

The ELECTROPRIME HOCO AC7 Storm power strip provides multiple power and charging options. It features a durable, flame-retardant PC material construction for enhanced safety.

이미지 1: 위에view of the ELECTROPRIME HOCO AC7 Storm Power Strip, illustrating both white and black color variants with their respective AC and USB ports, power button, and attached power cable with a US plug.

4. 설정

1. 풀다: 전원 스트립을 포장에서 조심스럽게 꺼내세요.
2. 놓기: Place the power strip on a stable, dry surface, away from heat sources, water, and direct sunlight. Ensure adequate ventilation around the unit.
3. 벽면 콘센트에 연결: Plug the power strip's US plug into a standard 250V wall outlet.
4. 전원 켜기: Press the power button located on the unit to turn on the power strip. An indicator light will illuminate when the unit is powered on.

이미지 2: 각진 view of the white power strip, highlighting the arrangement of AC and USB ports.

5. 사용 설명서

5.1 AC 콘센트 사용

The power strip features three universal AC outlets. To use, simply plug your appliances into the available sockets. Ensure the total power consumption of all connected devices does not exceed 2500W.

5.2 USB 충전 포트 사용

The power strip includes one USB-C port and three USB-A ports for charging mobile devices, tablets, and other USB-powered electronics. The total USB output is 5V/3.4A.

• Connect your device's USB charging cable to the appropriate USB-C or USB-A port on the power strip.
• 기기가 충전을 시작하는지 확인하세요.

이미지 3: 위에서 아래로 view of the white power strip, illustrating the layout of the AC outlets and USB ports, along with the attached power cable.

6. 유지관리

• 청소: 청소하기 전에 벽면 콘센트에서 멀티탭을 분리하세요. 마른 부드러운 천으로 표면을 닦으세요. 액체 세제나 에어로졸은 사용하지 마세요.
• 저장: 장기간 사용하지 않을 경우 멀티탭의 플러그를 뽑고 서늘하고 건조한 곳에 보관하십시오.
• 점검: Periodically inspect the power cord and plug for any signs of damage. If damaged, discontinue use and contact customer support.

7. 문제 해결

• 전원 없음:
  • 멀티탭이 제대로 작동하는 벽면 콘센트에 제대로 꽂혀 있는지 확인하세요.
  • Check if the power button on the strip is pressed to the "ON" position.
  • 벽면 콘센트가 제대로 작동하는지 확인하려면 다른 기기를 콘센트에 꽂아보세요.
• USB로 충전되지 않는 기기:
  • 멀티탭에 전원이 켜져 있는지 확인하십시오.
  • USB 케이블에 손상이 있는지 확인하고, 멀티탭과 기기에 제대로 연결되어 있는지 확인하십시오.
  • Verify that your device is compatible with 5V/3.4A USB charging.
• 과부하 보호: If the power strip stops providing power, it may have triggered its overload protection. Unplug all devices, wait a few minutes, and then press the power button to reset. Reduce the number of high-power devices connected.

8. 사양

9. 보증 및 지원

This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please contact ELECTROPRIME customer service through your purchase platform or the contact information provided with your product packaging.