Vormooi 64GB Digital Voice Recorder EB1 Instruction Manual

1. 서론

Thank you for choosing the Vormooi 64GB Digital Voice Recorder EB1. This compact and powerful device is designed for high-quality audio recording in various settings, including classes, lectures, and meetings. With its large storage capacity and long battery life, it provides a reliable solution for capturing important audio. This manual will guide you through the setup, operation, and maintenance of your new voice recorder.

2. 제품 오버view

Figure 1: Key Features of the Vormooi EB1 Digital Voice Recorder.

The Vormooi EB1 Digital Voice Recorder features a durable zinc alloy casing and a compact design. It is equipped with a professional 2159 recording chip and DSP digital noise cancellation for clear audio capture. Key specifications include:

• 메모리: 64GB, capable of storing up to 750 hours of 384kbps recording files.
• 배터리: Built-in 300mAh battery, providing 40-45 hours of continuous recording after a 2.5-hour full charge.
• 녹음 형식: WAV.
• 연결성: Micro USB 3.0 Type B, compatible with Personal Computers, Smartphones, and macOS.
• 치수: 약 0.23 x 1.25 x 2.10인치(6 x 32 x 52mm).
• 무게: 21그램.

3. 패키지 내용

다음 품목이 패키지에 포함되어 있는지 확인하세요.

• Vormooi 64GB Digital Voice Recorder EB1
• USB 충전/데이터 케이블
• 사용자 설명서

4. 장치 레이아웃 및 컨트롤

Figure 2: Vormooi EB1 Digital Voice Recorder Layout.

Familiarize yourself with the physical components of your recorder:

• 온 / 오프 스위치: Used to power the device on and off, and to start/save recordings.
• 표시등: Displays device status (e.g., recording, charging).
• USB 포트: For charging and connecting to a computer for data transfer.
• 끈 구멍: 휴대성을 높이기 위해 끈을 부착할 수 있습니다.

5. 설정

5.1 장치 충전

Figure 3: Charging the Voice Recorder.

Before first use, fully charge the recorder. Connect the device to a USB power source (e.g., computer USB port, USB wall adapter) using the provided USB cable. A full charge typically takes approximately 2.5 hours.

5.2 시간 설정

정확한 시간을 보장하려면amps on your recordings, synchronize the recorder's time with your computer's system time:

1. 녹음기를 컴퓨터에 연결하기 전에 전원이 꺼져 있는지 확인하십시오.
2. Connect the recorder to your computer via the USB cable. It will appear as a 'USB DISK'.
3. Open the 'USB DISK' drive.
4. Locate and open the folder named 'Settime'.
5. Inside the 'Settime' folder, run the application named 'SetDigitRecorderTm'. This application will automatically synchronize the recorder's time with your computer's system time.
6. Once synchronization is complete, safely eject the recorder from your computer.

Note: macOS does not support using this method to modify the time.

5.3 Activating Voice Activation (VOR)

The voice activation function is OFF by default. To enable or adjust it:

1. 녹음기를 컴퓨터에 연결하기 전에 전원이 꺼져 있는지 확인하십시오.
2. Connect the recorder to your computer via the USB cable. It will appear as a 'USB DISK'.
3. Open the 'USB DISK' drive.
4. 위치 file named 'RECSET.txt'.
5. Copy 'RECSET.txt' to your computer's desktop.
6. Open the 'RECSET.txt' file on your desktop using a text editor (e.g., Notepad on Windows, TextEdit on macOS).
7. Look for the line that begins with 'Vor'. The default setting is 'Vor:0', which means voice activated mode is off. To enable it, change 'Vor:0' to 'Vor:1' (or a value between 1-7 for sensitivity, where 7 is most sensitive).
8. You can also adjust the recording sensitivity ('Gain') and bitrate ('Bit') in this file. It is generally not recommended to modify the bitrate unless you understand the implications.
9. Save the changes to 'RECSET.txt'.
10. Delete the original 'RECSET.txt' file from the 'USB DISK'.
11. Copy the modified 'RECSET.txt' file from your desktop back to the 'USB DISK'.
12. Safely eject the recorder from your computer.
13. Restart the recorder by sliding the ON/OFF switch to OFF, then back to ON, for the changes to take effect.

6. 사용 설명서

6.1 전원 켜기/끄기

기기를 켜려면 ON/OFF 스위치를 'ON' 위치로 밀어주세요. 전원을 끄려면 'OFF' 위치로 밀어주세요.

6.2 녹음 시작

With the device powered off, slide the ON/OFF switch to the 'ON' position. The purple indicator light will be solid for 4-5 seconds, then the red light will flash 3 times, indicating that recording has started.

6.3 Saving a Recording

To stop and save the current recording, slide the ON/OFF switch to the 'OFF' position. The recording file will be automatically saved to the device's memory.

6.4 Connecting to a Computer and Playing Recordings

Figure 4: Connecting the Recorder via USB/OTG.

To access and play your recordings:

1. Ensure the recorder is turned OFF before connecting it to your computer or smartphone.
2. Connect the recorder to your computer using the provided USB cable. For smartphones, an OTG adapter (not included) may be required. The device will appear as a 'USB DISK'.
3. Open the 'USB DISK' drive.
4. Navigate to the folder named 'RECORD'. Your WAV recording files will be stored here.
5. For Windows users, it is recommended to use 'Windows Media Player' for playback, as 'Groove Music' may not support WAV recordings from this device. For macOS users, you can typically click on the recording file to play it directly.
6. After accessing your files, safely eject the recorder from your computer or smartphone.

7. 유지관리

To ensure the longevity and optimal performance of your Vormooi Digital Voice Recorder:

• 기기를 건조하고 습기가 없는 곳에 보관하세요.
• 기기를 극한의 온도(더위나 추위)에 노출시키지 마세요.
• 부드럽고 마른 천으로 기기를 닦으세요. 액체 세척제나 용제는 사용하지 마세요.
• Regularly back up your important recordings to a computer or cloud storage to prevent data loss.
• 장치를 떨어뜨리거나 강한 충격을 가하지 마십시오.

8. 문제 해결

If you encounter issues with your Vormooi Digital Voice Recorder, please refer to the following common solutions:

• 장치가 켜지지 않음: 배터리가 충전되어 있는지 확인하십시오. USB 전원에 연결하여 최소 30분 동안 충전한 후 다시 전원을 켜십시오.
• 녹음할 수 없습니다: Check if the device has sufficient storage space. Ensure the ON/OFF switch is fully in the 'ON' position.
• 녹음 품질이 좋지 않음: Ensure the microphone is not obstructed. If Voice Activation (VOR) is enabled, adjust the sensitivity settings in 'RECSET.txt'. Ensure the device is placed in an optimal position for sound capture.
• 컴퓨터가 장치를 인식하지 못합니다: Ensure the recorder is turned OFF before connecting. Try a different USB port or cable. Restart your computer.
• Cannot play WAV fileWindows의 경우: Use 'Windows Media Player' instead of 'Groove Music'.
• Voice Activation not working: Verify that 'Vor' is set to a value between 1-7 in 'RECSET.txt' and that the recorder was restarted after saving the changes.

If problems persist, please refer to your order history and contact the seller for support.

9. 사양

10. 보증 및 지원

Vormooi is committed to providing quality products and customer satisfaction. If you encounter any issues or have questions regarding your Vormooi Digital Voice Recorder EB1, please contact the seller through your order history on the platform where you made the purchase. Provide your order details for prompt assistance.