Liink1Ga Breakfast Table Set for 4 - Instruction Manual

소개

This manual provides essential information for the assembly, operation, and maintenance of your Liink1Ga Breakfast Table Set for 4. This set includes one rectangular dining table with a clear glass top and four chairs with black PU leather seats, designed for compact spaces.

조립하기 전에 이 설명서를 주의 깊게 읽고 나중에 참조할 수 있도록 보관하십시오.

Image: The Liink1Ga Breakfast Table Set for 4, featuring a rectangular glass table and four chairs, arranged in a modern dining setting.

안전 정보

Always prioritize safety during assembly and use. Please observe the following guidelines:

• 조립을 시작하기 전에 모든 부품이 있고 손상되지 않았는지 확인하세요.
• 긁힘을 방지하려면 부드럽고 깨끗한 표면에 제품을 조립하세요.
• Do not fully tighten all bolts until the entire unit is assembled, then tighten securely.
• 조립하는 동안 작은 부품을 어린이의 손이 닿지 않는 곳에 보관하세요.
• 테이블이나 의자 위에 서지 마세요.
• 테이블 표면에 무게를 고르게 분산시키세요.
• 안정성을 확보하기 위해 모든 고정 장치를 정기적으로 점검하고 조여주십시오.
• The table has a weight capacity of 220 lbs (100 kg). Each chair has a weight capacity of 330 lbs (150 kg). Do not exceed these limits.

패키지 내용

Your Liink1Ga Breakfast Table Set for 4 is shipped in one parcel and includes the following components:

• 1 x Rectangular Dining Table (Glass Top, Metal Frame)
• 4 x Dining Chairs (Metal Frame, PU Leather Seat)
• 조립 하드웨어(볼트, 와셔, 앨런 렌치)
• 사용 설명서

이미지: 오버view of the Liink1Ga Breakfast Table Set, showing the rectangular glass table and four chairs from an elevated angle.

설정 및 조립

Assembly of the Liink1Ga Breakfast Table Set requires 1-2 people and an Allen wrench (provided). Follow these steps carefully:

1. 구성 요소 풀기: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent damage. Verify all listed components are present.
2. 테이블 프레임 조립:
   • Attach the table legs to the table frame using the provided bolts and washers. Hand-tighten only at this stage.
   • Ensure the frame is stable and level before proceeding.
3. Attach the Glass Tabletop:
   • Carefully place the glass tabletop onto the assembled table frame. Ensure it aligns with the pre-drilled holes or suction cups/pads designed to secure it.
   • Secure the glass top according to the specific instructions in your included manual (e.g., using screws, suction cups, or rubber stoppers).
4. 의자 조립: 각 의자에 대해:
   • Attach the chair backrest to the seat frame.
   • 의자 다리를 좌석 프레임에 부착하세요.
   • Hand-tighten all bolts initially.
5. 최종 조임: Once all table and chair components are loosely assembled, place them on a level surface. Systematically tighten all bolts securely using the Allen wrench. Do not overtighten.

Image: Four individual chairs of the Liink1Ga dining set, ready for assembly or placement.

사용 설명서(사용법)

Your Liink1Ga Breakfast Table Set is designed for dining and general household use. Observe the following for optimal use:

• 놓기: Position the table and chairs on a flat, stable surface. Avoid placing in direct sunlight or near heat sources to prevent material degradation.
• 공간 절약형 디자인: The chairs are designed to tuck neatly under the table when not in use, optimizing space in smaller areas.
• 무게 분포 : For the table, distribute items evenly across the glass surface. Avoid placing heavy objects on the edges.
• 의자 사용: Sit centrally on the chairs. Avoid leaning back excessively or using chairs as step stools.

Image: A visual representation of the space-saving design, illustrating how the chairs can be stored under the table when not in use.

유지

Proper care will extend the life and appearance of your dining set:

• 유리 상판 청소하기: Wipe the tempered glass tabletop with a soft, damp cloth and a mild glass cleaner. Dry immediately with a clean, lint-free cloth to prevent streaks. Avoid abrasive cleaners or scouring pads.
• 금속 프레임 청소: Wipe the powder-coated metal frame with a soft, dry cloth. For stubborn marks, use a slightly damp 천으로 닦아서 완전히 말리세요.
• Cleaning PU Leather Seats: Wipe the PU leather seats with a soft, damp cloth. For spills, blot immediately and clean with a mild soap solution, then wipe dry. Avoid harsh chemicals or excessive moisture.
• 정기 검사: Periodically check all bolts and fasteners for tightness. Re-tighten as necessary to maintain structural integrity.
• 보호: Use placemats or coasters to protect the glass surface from scratches and heat.

Image: Detail of the clear glass tabletop secured to the black metal frame, highlighting the materials.

이미지: 클로즈업 view of the black PU leather material used for the chair seats, showing its texture.

문제 해결

If you encounter issues with your Liink1Ga Breakfast Table Set, refer to the following common problems and solutions:

명세서

Detailed specifications for the Liink1Ga Breakfast Table Set:

• 모델: B0D15447S4
• 상표: Liink1Ga
• 재료: Tempered Glass, Metal (Powder-Coated), PU Leather
• 색상: Clear Glass, Black Metal Frame, Black PU Leather Seats
• 테이블 크기(길이 x 너비 x 높이): 43.21" x 27.56" x 29.53"(110cm x 70cm x 75cm)
• Chair Dimensions (W x D x H): 15.75" x 15.75" x 35.43"(40cm x 40cm x 90cm)
• 테이블 중량 용량: 220파운드(100kg)
• 의자 중량 용량: 의자당 330파운드(150kg)
• 모양: 직사각형 (테이블)
• 필요한 조립: Yes (1-2 person recommended)
• 관리 지침: (일반적인 청소 시) 마른 천으로 닦아주세요.

Image: A technical drawing illustrating the precise dimensions of both the dining table and a single chair in centimeters and inches.

보증 및 지원

For warranty information or customer support regarding your Liink1Ga Breakfast Table Set, please refer to the documentation included with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.

Manufacturer: Liink1Ga

For further assistance, you may visit the official Liink1Ga store on Amazon: Liink1Ga Store