소개
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your DORTALA 14-inch Full Size Solid Wood Bed Frame. Please read all instructions carefully before assembly and use to ensure safe and proper operation of the product.
안전 정보
경고: 심각한 부상을 예방하려면 항상 다음 안전 지침을 따르세요.
- Do not load more than 500파운드 onto the bed frame. Exceeding this weight limit may cause structural damage and injury.
- Exercise caution around legs during assembly to avoid pinch points.
- Assemble the bed frame strictly according to the provided instructions to ensure stability and prevent collapse.
- 사용 전에 모든 볼트와 나사가 단단히 조여졌는지 확인하고, 주기적으로 조임 상태를 점검하십시오.
- 조립 중에는 어린이의 손이 닿지 않는 곳에 작은 부품을 보관하여 질식 위험을 방지하세요.
패키지 내용
조립을 시작하기 전에 모든 구성품이 있는지, 손상되지 않았는지 확인하십시오. 부품이 누락되었거나 손상된 경우 조립을 진행하지 말고 고객 지원 센터에 문의하십시오.
- 헤드보드 및 풋보드 부분
- 사이드 레일(2)
- 중앙 지지 빔
- Support Legs (6 on sides, 4 in middle - total 10)
- Poplar Wood Slats (14)
- 하드웨어 세트 (볼트, 와셔, 육각 렌치)
- 사용 설명서
설정 및 조립
Assembly typically requires two adults. Clear a spacious area for assembly and keep all parts organized.
1단계: 구성 요소 풀기 및 식별
Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches. Refer to the parts list to ensure all components are present.
그림 1: 폭발했다 view of the DORTALA Full Size Solid Wood Bed Frame components, showing all parts required for assembly.
2단계: 프레임 조립
Attach the side rails to the headboard and footboard sections using the provided bolts and Allen wrench. Do not fully tighten bolts until the entire frame is assembled.
그림 2: Detail of the solid rubber wood construction, highlighting the smooth surface and craftsmanship of the frame components.
Step 3: Install Support Legs and Center Beam
Secure the 6 side support legs and 4 middle support legs to the designated points on the frame and center beam. Ensure all legs are firmly attached and provide even support.
그림 3: Illustration of the 14 solid wooden slats and 10 stable support legs, demonstrating the robust construction for mattress support.
Step 4: Place Slats
Lay the 14 poplar wood slats across the frame, ensuring they are evenly spaced. The slats are designed to provide direct support for your mattress, eliminating the need for a box spring. Some slats may include considerate stickers to help retain the mattress in place.
그림 4: View of the bed frame with a mattress, highlighting the hoop and loop fasteners designed to keep the mattress firm and prevent shifting.
5단계: 최종 체결
Once all components are in place, fully tighten all bolts and screws. Ensure the frame is stable and level before placing your mattress.
작동 지침
Your DORTALA bed frame is designed for optimal mattress support without a box spring.
- 매트리스 배치: Place your full-size mattress directly onto the wooden slats. The frame is compatible with memory foam and traditional mattresses.
- 중량 용량: 침대 프레임의 최대 하중 용량은 다음과 같습니다. 500파운드. Do not exceed this limit to maintain structural integrity and safety.
- 침대 밑 수납 공간: Utilize the 10.5-inch under-bed clearance for storage boxes or other items. This space also allows for easy cleaning underneath the bed.
그림 5: Illustration of the 10.5-inch under-bed storage space, demonstrating its utility for storing items and allowing access for cleaning devices.
유지
- 청소: 나무 프레임은 부드러운 천으로 닦아주세요.amp 천을 사용하십시오. 목재 마감재를 손상시킬 수 있는 독한 화학 약품이나 연마성 세척제는 사용하지 마십시오.
- 견고성 확인: Periodically (e.g., every 3-6 months) check all bolts and screws to ensure they remain tight. Re-tighten if necessary to maintain stability.
- 목재 관리: To preserve the natural wood finish, avoid prolonged exposure to direct sunlight or extreme humidity.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 침대 프레임이 흔들리거나 불안정합니다. | 볼트나 나사가 헐거워졌거나, 바닥이 고르지 않은 경우. | Ensure all bolts and screws are fully tightened. Move the bed to a level surface or use shims under legs if necessary. |
| 삐걱거리는 소리. | 연결 부위가 헐거워져 있습니다. 판자가 프레임에 마찰되고 있습니다. | Re-tighten all hardware. Check if slats are properly seated and not rubbing. Apply a small amount of wax or felt pads where wood meets wood if squeaking persists. |
| Mattress slides on slats. | 매트리스와 슬랫 사이의 마찰 부족. | Ensure the "considerate stickers" (hoop & loop fasteners) on the slats are clean and making contact with the mattress. You can also place a non-slip mat between the mattress and slats. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | GT-ZM84125VG |
| 크기 | 가득한 |
| 제품 크기(L x W x H) | 74.5인치 x 53.5인치 x 14인치 |
| 재료 | Solid Rubber Wood, Poplar Wood Slats |
| 중량 용량 | 500파운드 |
| 침대 밑 여유 공간 | 10.5인치 |
| 슬랫의 수 | 14 |
| Number of Support Legs | 10 (6 side, 4 middle) |
| 품목 무게 | 61.5파운드 |
| 한국어: | 685764546492 |
보증 및 지원
For warranty information, missing parts, or technical support, please contact DORTALA customer service directly. Refer to your purchase documentation or the DORTALA official web구체적인 연락처 정보는 해당 사이트를 참조하세요.
DORTALA Customer Service: Please refer to the contact information provided at the point of purchase or on the official DORTALA web대지.