AMPBANK AB2000 2000A 휴대용 점프 스타터 사용 설명서

1. 제품 오버view

그만큼 AMPBANK AB2000 is a powerful and portable jump starter designed to start 12V vehicles with up to 8.0L gasoline or 6.0L diesel engines. It also functions as a portable power bank and features an ultra-bright LED flashlight for emergency situations.

이미지: AMPBANK AB2000 Portable Jump Starter, highlighting its 2000A peak current, compatibility with 12V vehicles, and capacity for up to 8.0L gas and 6.0L diesel engines.

2. 안전 정보

Always read and understand all safety information before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Keep the jump starter power above 50% for optimal starting efficiency.
• 케이블이나 cl이 끊어진 경우 점프 스타터를 사용하지 마십시오.amps가 손상되었습니다.
• 올바른 극성 연결을 확인하십시오 (빨간색 클립).amp 포지티브, 블랙 clamp 부정으로).
• cl의 단락을 피하십시오amps.
• Do not expose the device to water, rain, or extreme temperatures.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 그만큼 AMPBANK jump starter incorporates 8 safety protections: anti-spark, anti-overcharge, anti-short circuit, anti-reverse connection, anti-surge, reverse polarity protection, over-discharge protection, and over-voltag전자 보호.

이미지: 시각적 표현 AMPBANK AB2000's 8 built-in safety protections, ensuring safe operation.

3. 상자 안에 무엇이 들어있나요?

모든 품목을 조심스럽게 풀어서 다음 품목이 있는지 확인하세요.

• AMPBANK AB2000 Car Jump Starter (x1)
• Jumper Cable with Smart Clamp초 (x1)
• USB Type-C 충전 케이블(x1)
• 사용 설명서(x1)
• EVA Carrying Case (x1)

이미지: 모든 구성 요소가 포함되어 있습니다. AMPBANK AB2000 package, neatly arranged.

4. 제품 특징 및 구성품

Familiarize yourself with the key features and ports of your AMPBANK AB2000 jump starter:

• 전원 버튼/배터리 표시등: Displays current battery level and turns the device on/off.
• 점프 스타트 포트: 스마트 점퍼 케이블에 연결합니다.
• USB Type-C Input/Output (PD18W): 점프 스타터 및 기타 기기 충전용입니다.
• USB-A Output (5V/3A): 휴대폰, 태블릿 및 기타 USB 전원 장치 충전용.
• DC Output (12-16.8V/10A): 12V DC 장치에 전원을 공급하는 데 사용합니다.
• LED 손전등: Provides illumination with multiple modes (stable, strobe, SOS).

이미지: AMPBANK AB2000 unit, showcasing its design and interface elements.

5. 점프 스타터 충전

처음 사용하기 전에 완전히 충전하십시오. AMPBANK AB2000. It is recommended to recharge the jump starter once every three months if not used for a long time to maintain battery health.

1. 제공된 USB Type-C 충전 케이블을 점프 스타터의 Type-C 입력/출력 포트에 연결합니다.
2. Connect the other end of the USB Type-C cable to a compatible USB wall adapter (not included) or car charger.
3. The battery indicator lights will illuminate and flash during charging. All four lights will be solid when fully charged.

6. 작동 지침: 차량 점프 스타트 방법

차량 시동을 걸기 전에 점프 스타터의 배터리 잔량이 최소 50% 이상인지 확인하십시오.

1. 점퍼 케이블을 연결하세요: Insert the blue plug of the smart jumper cables into the jump start port on the AMPBANK AB2000. Ensure it is fully seated.
2. 배터리에 연결하세요:
   • 첨부하다 빨간색 양(+) clamp 차량 배터리의 양극(+) 단자에 연결합니다.
   • 첨부하다 검은색 음(-) clamp 차량 배터리의 음극(-) 단자에 연결합니다.

   스마트 클amp indicator light will show the connection status. A solid green light indicates a correct and ready connection.

3. 차량 시작: 차량에 탑승하여 시동을 걸세요.
4. 케이블을 제거하세요: Once the vehicle starts, immediately remove the black negative (-) clamp from the vehicle battery, then remove the red positive (+) clamp. Finally, disconnect the smart jumper cables from the jump starter.

Using "BOOST" Mode for Completely Dead Batteries

If the vehicle battery is completely dead or has very low voltage, the standard jump start procedure might not work. In such cases, use the "BOOST" function:

1. Follow steps 1 and 2 above to connect the jumper cables to the jump starter and the vehicle battery.
2. 스마트 기기의 "BOOST" 버튼을 길게 누르세요.amp for 3 seconds. The indicator light will turn solid green, indicating "BOOST" mode is active.
3. Immediately start the vehicle within 30 seconds. If the car does not start, the "BOOST" mode will exit, and you will need to repeat the process.
4. Once the vehicle starts, immediately remove the black negative (-) clamp, then the red positive (+) clamp, and finally disconnect the smart jumper cables from the jump starter.

이미지: AMPBANK AB2000 connected to a car battery, illustrating the "BOOST" mode button on the smart clamp for starting completely dead batteries.

7. 기타 기능

7.1 휴대용 파워뱅크

The AB2000 can charge various electronic devices:

• USB Type-C (PD18W) & USB-A (5V/3A): Connect your mobile phone, tablet, or other USB-powered devices using their respective charging cables to the appropriate output ports.
• DC Output (12-16.8V/10A): Use this port to power 12V DC devices, such as car vacuum cleaners or tire inflators (ensure compatibility).

이미지: AMPBANK AB2000 functioning as a portable power bank, charging a smartphone and a tablet simultaneously.

7.2 Ultra-Bright LED Light

The built-in LED flashlight offers three modes for various situations:

1. 켜기/끄기: Press and hold the flashlight button for 3 seconds.
2. 모드를 변경하려면: Short press the flashlight button to cycle through modes: Stable Light → Strobe Light → SOS Signal.

이미지: AMPBANK AB2000's high-power LED flashlight in use, demonstrating its utility for illumination and emergency signaling.

8. 유지관리

• 충전재: If the jump starter is not used for a long time, it is recommended to recharge it once every three months to prolong battery life.
• 청소: 부드럽고 마른 천으로 기기를 닦으십시오. 강한 화학 약품이나 연마제를 사용하지 마십시오.
• 저장: Store the jump starter in its EVA carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.

9. 문제 해결

10. 사양

11. 보증 및 지원

그만큼 AMPBANK AB2000 comes with a 1-year quality assurance warranty and a 30-day free refund period. Lifetime free technical support is also provided.

For any questions or support needs, please contact AMPBANK customer service.